• High Power Laser and Particle Beams
  • Vol. 35, Issue 3, 034002 (2023)
Qin Li, Xiaozhong He, Wei Jiang, Zhiyong Yang, and Yunlong Liu
Author Affiliations
  • Key Laboratory of Pulsed Power, Institute of Fluid Physics, CAEP, P. O. Box 919-106, Mianyang 621900, China
  • show less
    DOI: 10.11884/HPLPB202335.220224 Cite this Article
    Qin Li, Xiaozhong He, Wei Jiang, Zhiyong Yang, Yunlong Liu. Physical design of calibrated device for intense pulse electron beam position monitor[J]. High Power Laser and Particle Beams, 2023, 35(3): 034002 Copy Citation Text show less
    References

    [1] He Wenlong. Intensity position measurements of an intense particle beam using resistance ring[C]Proceedings of the conference on 10 MeV Liner Induction Accelerat. 1994

    [2] Fessenden T J, Stallard B W, Berg G G. Beam current and position monitor for the Astron accelerator[J]. Review of Scientific Instruments, 43, 1789-1792(1972).

    [3] Xie Yutong, Dai Zhiyong, Han Qing. Improvement on the accuracy of beam bugs in linear induction accelerator[J]. High Power Laser and Particle Beams, 14, 151-155(2002).

    [4] Li Qin, Li Hong, Chen Nan, . B-dot monitor for intense electron beam measurement[J]. High Power Laser and Particle Beams, 21, 1390-1394(2009).

    [5] Zhao Jijiu, Yin Zhaosheng. Particle accelerat technology[M]. Beijing: Higher Education Press, 2006

    [6] Wang Shengchang, Wang Anxin, Xu Taoguang. Design of wall current monitor for proton accelerators[J]. High Power Laser and Particle Beams, 24, 2179-2182(2012).

    [7] Zou Junying. Development application of inject beam position monit system at HLS ΙΙ[D]. Hefei: University of Science Technology of China, 2014

    [8] Wang Jianxin, Liu Yu, Zhang Hao, . Calibration of integrating current transformer[J]. Atomic Energy Science and Technology, 49, 620-623(2015).

    [9] Li Jihao, Sun Baogen, He Duohui, . Mapping of strip line beam position monitor at HLS LINAC based on logarithm ratio processing method[J]. Atomic Energy Science and Technology, 41, 339-342(2007).

    [10] Wang Guicheng, Wang Junhua, Jiang Daoman, . A BPM calibration system and its application[J]. Nuclear Techniques, 26, 254-256(2003).

    [11] He Xiaozhong, Pang Jian, Li Qin, . Influence of beam test stand’s impedance on calibration results[J]. High Power Laser and Particle Beams, 26, 035104(2014).

    [12] Shokair I R. Measuring axially varying beam position using B-dot monitors[J]. Review of Scientific Instruments, 60, 2969-2974(1989).

    [13] Ekdahl C A. Fourier-analyzing coil arrays for pulsed relativistic electron beam experiments[J]. Review of Scientific Instruments, 55, 1221-1228(1984).

    [14] Carlson R L, Ridlon R N, Stout L E. Multigigahertz beam current and position monitor for relativistic electron beams[J]. Review of Scientific Instruments, 57, 2471-2474(1986).

    [15] Rienstra W W, Haworth M D. An exact analysis for beam centroid position monitors used in pulsed intense relativistic electron-beam experiments[J]. Review of Scientific Instruments, 62, 2363-2367(1991).

    Qin Li, Xiaozhong He, Wei Jiang, Zhiyong Yang, Yunlong Liu. Physical design of calibrated device for intense pulse electron beam position monitor[J]. High Power Laser and Particle Beams, 2023, 35(3): 034002
    Download Citation