[2] Yang Jiaoxi, Wen Qiang, Li Ziyang, et al.. Influence of Ni addition on the microstrucures and properties of laser clad CuAl10 coatings [J]. Chinese J Lasers, 2015, 42(3): 0306006.
[3] Liu Haiqing, Liu Xiubo, Meng Xiangjun, et al.. Study on γ-NiCrAlTi/TiC+TiWC2/CrS+Ti2CS high-temperature self-lubricating wear resistant composite coating on Ti-6Al-4V by laser cladding[J]. Chinese J Lasers, 2014, 41(3): 0303005.
[4] Yeh J W, Chen S K, Lin S J, et al.. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes[J]. Advanced Engineering Materials, 2004, 6(5): 299-303.
[5] Xu X D, Liu P, Guo S, et al.. Nanoscale phase separation in a fcc-based CoCrCuFeNiAl0.5 high-entropy alloy[J]. Acta Materialia, 2015, 84: 145-152.
[6] Liu W H, He J Y, Huang H L, et al.. Effects of Nb additions on the microstructure and mechanical property of CoCrFeNi high-entropy alloys[J]. Intermetallics, 2015, 60: 1-8.
[7] Varalakshmi S, Kamaraj M, Murty B S. Synthesis and characterization of nanocrystalline AlFeTiCrZnCu high entropy solid solution by mechanical alloying[J]. Journal of Alloys and Compounds, 2008, 460(1-2): 253–257.
[8] Zhao Ruifeng, Li Hongju, Ren Bo, et al.. Microstructure and properties of AlCrMnMoNiZr(B0.1) high entropy alloy prepared by powder metallurgy process[J]. Special Casting & Nonferrous Alloys, 2013, 33(3): 288-292.
[9] Wang L M, Chen C C, Yeh J W, et al.. The microstructure and strengthening mechanism of thermal spray coating NixCo0.6Fe0.2CrySi2AlTi0.2 high-entropy alloys[J]. Materials Chemistry and Physics, 2011, 126(3): 880-885.
[10] Yao C Z, Zhang P, Liu M, et al.. Electro chemical preparation and magnetic study of Bi- Fe- Co- Ni- Mn high entropy alloy[J]. Electrochimica Acta, 2008, 53(28): 8359-8365.
[11] Braeckman B R, Boydens F, Hidalgo H, et al.. High entropy alloy thin films deposited by magnetron sputtering of powder targets[J]. Thin Solid Films, 2015, 580(1): 71-76.
[12] Zhang Hui, Pan Ye, He Yizhu. Laser cladding FeCoNiCrAl2Si high-entropy alloy coating[J]. Acta Metallurgica Sinica, 2011, 47(8): 1075- 1079.
[13] Zhang H, Pan Y, He Y Z, et al.. Microstructure and properties of 6FeNiCoSiCrAlTi high-entropy alloy coating prepared by laser cladding [J]. Applied Surface Science, 2011, 257(6): 2259-2263.
[14] Zhang H, Pan Y, He Y Z. Synthesis and characterization of FeCoNiCrCu high-entropy alloy coating by laser cladding[J]. Materials and Design, 2011, 32(4): 1910-1915.
[15] Zhang H, He Y Z, Pan Y. Enhanced hardness and fracture toughness of the laser-solidified FeCoNiCrCuTiMoAlSiB0.5 high-entropy alloy by martensite strengthening[J]. Scripta Materialia, 2013, 69(4): 342-345.
[16] Qiu Xingwu, Zhang Yunpeng, Liu Chunchuang. Microstructure and properties of Al2CrFeCoxCuNiTi high-entropy alloy coating prepared by laser cladding[J]. Materials Science and Engineering of Powder Metallurgy, 2013, 18(5): 735-740.
[17] Qiu X W, Liu C G. Microstructure and properties of Al2CrFeCoCuTiNix high-entropy alloys prepared by laser cladding[J]. Journal of Alloys and Compounds, 2013, 553: 216-220.
[18] Weng Ziqing, Dong Gang, Zhang Qunli, et al.. Effects of annealing on microstructure and properties of FeCrNiCoMn high-entropy alloy coating prepared by laser cladding[J]. Chinese J Lasers, 2014, 41(3): 0303002.
[19] Zhang Song, Wu Chenliang, Yi Junzhen, et al.. Study on microstructure and performance of a FexCoCrAlCu/Q235 laser alloying coatings [J]. Chinese J Lasers, 2014, 41(8): 0803006.
[20] Huang Can. Investigation of Laser Clad TiCrAlSi System Multi-Principal Element Alloys on Titanium Alloy[D]. Beijing: General Research Institute for Nonferrous Metals, 2012.
[21] Wang F J, Zhang Y, Chen G L. Atomic packing efficiency and phase transition in a high entropy alloy[J]. Journal of Alloys and Compounds, 2009, 478(1-2): 321-324.
[22] Zhu J M, Fu H M, Zhang H F, et al.. Synthesis and properties of multiprincipal component AlCoCrFeNiSix alloys[J]. Materials Science and Engineering, 2010, 527(27-28): 7210-7214.
[23] Yang X, Zhang Y. Prediction of high-entropy stabilized solid-solution in multi-component alloys[J]. Materials Chemistry and Physics, 2012, 132(2-3): 233-238.
[24] Guo S, Ng C, Lu J, et al.. Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys[J]. Journal of Applied Physics, 2011, 109: 103505.
[25] Takeuchi A, Inoue A. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element[J]. Materials Transactions, 2005, 46(12): 2817- 2829.
[26] An Xulong, Liu Qibin, Zheng Bo. Microstructure and properties of laser cladding high entropy alloy MoFeCrTiWAlxSiy coating[J]. Infrared and Laser Engineering, 2014, 43(4): 1140-1144.
[27] Pilling N B, Bedworth R E. The oxidation of metals in high temperature[J]. Journal of Institute of Metals, 1923, 29: 529.
[28] Li Tiefan. High-temperature oxidation and hot corrosion of metals[M]. Beijing: Chemical Industry Press, 2003.
