[1] WANG Xiao-kun.Optical design of a high resolution space camera[J].Acta Optica Sinica,2015,35(1):0122001.

[2] WALKER D D,BEAUCAMP A T H,BINGHAM R G,et al.The precessions process for efficient production of aspheric optics for large telescopes and their instrumentation[C].SPIE,2003,4842:73-84.

[3] XU Hong,GUAN Ying-jun.Structural design of large aperture SiC mirror subassembly[J].Infrared and Laser Engineering,2014,43(S):83-88.

[4] DUAN Xue-ting,ZHOU Ren-kui,WU Meng-yuan,et al.Distortion alignment method for center shaft supporting large aperture mirror[J].Acta Photonica Sinica,2011,40(S):95-98.

[5] QI Guang,WANG Shu-xin,LI Jing-lin.Design of high volume fraction SiC/Al composite mirror in space remote sensor[J].Chinese Optics,2015,8(1):99-106.

[6] CHEN Rong-li,ZHAO Xin-min,XIE Yong-jie,et al.Engineering analysis on high resolution space camera[J].Acta Photonica Sinica,2005,34(2):267-271.

[7] WANG Hong-juan,WANG Wei,WANG Xin,et al.Space camera image degradation induced by satellite micro-vibration[J].Acta Photonica Sinica,2013,42(10):1212-1217.

[8] LI Zong-xuan,CHEN Xue,ZHANG Lei,et al.Design of Cartwheel flexural support for a large aperture space mirror[J].Acta Optica Sinica,2014,34(6):0622003.

[9] CHEN Hong-da,CHEN Yong-he,SHI Ting-ting,et al.Lightweight and mounting design for primary mirror in space camera[J].Infrared and Laser Engineering,2014,43(2):535-540.

[10] ZHAO Ru-cheng,BAO Jian-xun.Investigation and application of large scale lightweight SiC mirror[J].Chinese Optics,2014,7(4):552-558.

[11] ZHANG Yuan-yuan,JING Wei,CHENG Yun-tao,et al.Design and finite element analysis of Φ510 mm SiC ultra-lightweight mirror[J].Optics and Precision Engineering,2012,20(8):1718-1724.

[12] LIU Shu-tian,HU Rui,ZHOU Ping,et al.Topologic optimization for configuration design of web-skin-type ground structure based large-aperture space mirror[J].Optics and Precision Engineering,2013,21(7):1803-1810.

[13] XIA Yu,ZENG Chun-mei,GUO Pei-ji,et al.Lay-up design of quasi-isotropic CFRP mirror for active forming[J].Infrared and Laser Engineering,2012,41(7):1885-1892.

[14] HU Hai-fei,GUAN Ying-jun,ZHAO Si-hong,et al.Analysis led design and optimization for large aperture mirror[J].Journal of System Simulation,2013,25(5):990-994.

[15] ZHANG Ge.Gelcasting process of 1.5m SiC ceramic green body[J].Optics and Precision Engineering,2013,21(12):2989-2993.

[17] SHEN Zhen-feng,GAO Jin-song,CHEN Hong,et al.Performance and reliability evaluation for the surface modification of space used silicon carbide mirror[J].Acta Optica Sinica,2009,38(9):2353-2358.

[18] ZHOU Chen,WANG Zhi-jin,ZHI Jiao-yang.Aerodynamic optimization design of adaptive airfoil leading edge based on Isight[J].Journal of Shanghai Jiaotong University,2014,48(8):1122-1126.

[19] FENG Yong,XU Zhen-qin.Comprehensive optimization of initial perturbation of a rocket system with multi-island genetic algorithms[J].Journal of Vibration and Shock,2014,33(9):168-172.

[20] PANG Yong-jie,WANG Ya-xing,YANG Zhuo-yi,et al.Direct route drag calculation and shape optimization of Myring shape axisymmetric revolution body[J].Journal of Harbin Engineering University,2014,35(9):1093-1098.