[1] Guan Yanjin,Ji Zhong,Sun Sheng et al.. Technology and application of forming caused by laser-induced thermal stresses[J]. Aeronautical Manuf. Technol.,1999,(4):30-35

[2] Li Weimin,M. Geiger,F. Vollertsen. Study on laser bending of metal sheets[J]. Chinese J. Lasers,1998,A25(9):859-864

[3] Pei Jibin,Zhang Liwen,Zhang Quanzhong et al..Experimental study on laser bending of shipbuilding sheet plate[J].Forging & Stamping Technology,2005,30(5):64-66

[4] J. Lawrence,M. J. J. Schmidt,L. Li. The forming of mild steel plates with a 2.5 kW high power diode laser[J].International Journal of Machine Tools & Manufacture,2001,41(7):967-977

[5] S. P. Edwardson,E. Abed,K. Bartkowiak et al.. Geometrical influences on multi-pass laser forming[J]. J. Phys. D:Appl. Phys.,2006,39(2):382-389

[6] J. Lawrence. A comparative investigation of the efficacy of CO2 and high-power diode lasers for the forming of EN3 mild steel sheets[J]. Proc. Inst. Mech. Eng. B:J.Eng. Manuf.,2002,216(11):1481-1491

[7] Cai Yougui,Wang Xiufeng,Chen Guangnan et al.. Experiment of sheet metal on laser bending[J]. Journal of Beijing University of Aeronautics and Astronautics,2009,35(2):154-157

[8] Liu Jie,Sun Sheng,Guan Yanjin. Numerical and experimental study on the laser micro-bending process[J]. Chinese J. Lasers,2008,35(2):276-280

[9] Shi Yongjun,Liu Feng,Qi Yaoguang et al.. Effect of heating position on deformation of plate in laser forming[J]. Chinese J. Lasers,2008,35(7):1087-1090

[10] Shi Yongjun,Yao Zhenqiang,Shen Hong et al.. Research on the mechanisms of laser forming for the metal plate[J]. International Journal of Machine Tools & Manufacture,2006,46(12-13):1689-1697

[11] Toshiyuki Miyazaki,Tadashi Misu,Osamu Yamazaki et al.. Laser bending of thin metal plate-effects of two beams and single line beam on bending characteristics based on buckling mode[C]. ICALEO 2006 Congress Proceedings,Scottsdale,AZ,United States:Laser Institute of America,13501 Ingenuity Drive-Suite 128,Orlando,FL 32826,United States,2006:800-804

[12] L. Casamichele,F. Quadrini,V. Tagliaferri. Process-efficiency prediction in high power diode laser forming[J]. J. Manuf. Sci. Eng.,2007,129(5):868-873

[13] F. R. Liu,K. C. Chan,C. Y. Tang. Numerical modeling of the thermo-mechanical behavior of particle reinforced metal matrix composites in laser forming by using a multi-particle cell model[J]. Composites Science and Technology,2008,68(9):1943-1953

[14] Liu Jie,Sun Sheng,Guan Yanjin. Numerical study on the laser bending of stainless steel foil with pre-stresses[J]. Chinese J. Lasers,2008,35(8):1265-1270

[15] M. L. Chen,J. Jeswiet,P. J. Bates et al.. Experimental study on sheet metal bending with medium-power diode laser[J]. Proceedings of the Institution of Mechanical Engineers,Part B:Journal of Engineering Manufacture,2008,222(3):381-389

[16] V. Paunoiu,E. A. Squeo,F. Quadrini et al.. Laser bending of stainless steel sheet metals[J]. Int.J. Mater. Forming,2008,1(s1):1371-1374

[17] Me. Sistaninia,Ma. Sistaninia,H. Moeanodini. Laser forming of plates using rotating and dithering beams[J]. Computational Materials Science,2009,45(2):480-488

[18] Takashi Ueda,Eisuke Sentoku,Yoshihiro Wakimura et al.. Flattening of sheet metal by laser forming[J]. Opt. Lasers Eng.,2009,47(11):1097-1102

[19] Lin Li. The advances and characteristics of high-power diode laser materials processing[J]. Opt. Lasers Eng.,2000,34(4-6):231-253

[20] Zhu Zuchang,Ye Jian. Application status of high power diode lasers for transformation hardening of steels[J]. Heat Treatment. Metals,2008,33(8):16-20

[21] Ma Xiaoyu,Wang Jun,Liu Suping.Present situation of investigations and applications in high power semiconductor lasers[J].Infrared and Laser Engineering,2008,37(2):189-194

[22] Friedrich Bachmann. Industrial applications of high power diode lasers in materials processing[J]. Appl. Surf. Sci.,2003,208-209(Suppl.):125-136

[23] Chen Dunjun. Research on Laser Bending of Sheet Metals[D]. Xi′an: Northwest Polytechnical University,2001,22-23