Design and Analysis of 120-μm Core Rod-Type Photonic Crystal Fiber for High Power 1.5-μm Band Amplifier

Lei Zhou; Jiping Ning; Bo Chen; Qun Han; Weiyi Zhang; Juntao Wang

doi:10.3788/cjl20103712.3044

[1] J. Nilsson, S.-U. Alam, J. A. Alvarez-Chavez et al.. High-power and tunable operation of erbium-ytterbium co-doped cladding-pumped fiber lasers［J］. IEEE J. Quantum Electron., 2003, 39(8): 987～993

[2] O. Schmidt, C. Wirth, I. Tsybin et al.. Average power of 1.1 kW from spectrally combined, fiber-amplified nanosecond-pulsed sources［J］. Opt. Lett., 2009, 34(10): 1567～1569

[3] S. Yoav, G. Yaakov, K. Tomer et al.. Extractable energy from erbium-ytterbium co-doped pulsed fiber amplifiers and lasers［J］ . Opt. Commun., 2008, 281(5): 1162～1178

[4] V. Philippov, J. K. Sahu, C. Codemard et al.. All-fiber 1.15 mJ pulsed eye-safe optical source[C]. SPIE, 2004, 5335: 1～7

[5] Y. Jeong, J. K. Sahu, D. B. S. Soh. High-power tunable single frequency single-mode erbium: ytterbium codoped large-core fiber master-oscillator power amplifier source［J］. Opt. Lett., 2005, 30(22): 2997～2999

[6] J. K. Sahu, Y. Jeong, D. J. Richardson. A 103W erbium/ytterbium co-doped large-core fiber laser［J］. Opt. Commun., 2003, 227(1-3): 159～163

[7] D. A. Fishman, J. A. Nagel. Degradations due to stimulated Brillouin scattering in multigigabit internal-modulated fiber-optic systems［J］. J. Lightwave Technol., 1993, 11(11): 1721～1728

[8] J. P. Koplow, D. A. V. Kliner, L. Goldberg. Single-mode operation of a coiled multimode fiber amplifier［J］. Opt. Lett., 2000, 25(7): 442～444

[9] C. D. Brooks, F. Di Teodoro. High peak power operation and harmonic generation of a single-polarization, Yb-doped photonic crystal fiber amplifier［J］. Opt. Commun., 2007, 280(2): 424～430

[10] T. A. Birks, J. C. Knight, P. St. J. Russell. Endlessly single-mode photonic crystal fiber［J］. Opt. Lett., 1997, 22(13): 961～963

[11] S. K. Varshney, T. Fujisawa, K. Saitoh et al.. Design and analysis of a broadband and dispersion compensation photonic crystal fiber Raman amplifier operating in S-band［J］. Opt. Express, 2006, 14(8): 3528～3540

[12] Wu Yinzhong, Liu Bowen, Song Youjian et al.. Micromachining system based on photonic crystal fiber femtosecond laser amplifier［J］. Chinese J. Lasers, 2008, 35(7): 1078～1082

[13] Liu Bowen, Hu Minglie, Song Youjian et al.. 39 fs, 16 W all photonic crystal fiber laser system［J］. Chinese J. Lasers, 2008, 35(6): 811～814

[14] Cui Li, Zhao Jianlin, Zhang Xiaojuan et al.. Analysis of bending loss oscillations in photonic crystal fiber［J］. Acta Optica Sinica, 2008, 28(6): 1172～1177

[15] Han Xiaoming, Yang Dexing, Zhao Jianlin et al.. Thermal effect in high-power Yb3+-doped photonic crystal fiber lasers［J］. Chinese J. Lasers, 2009, 36(11): 2822～2826

[16] Liu Huagang, Hu Minglie, Liu Bowen et al.. High power ultraviolet laser source based on photonic crystal fiber femtosecond laser system［J］. Chinese J. Lasers, 2009, 36(11): 2812～2816

[17] M. E. Fermann. Single-mode excitation of multimode fibers with ultrashort pulses［J］. Opt. Lett., 1998, 23(1): 52～54

[18] F. Di Teodoro, M. Savage-Leuchs, M. Norsen. High-power pulsed fiber source at 1567 nm［J］. Electron. Lett., 2004, 40(24): 1525～1526

[19] S. Desmoulins, F. Di Teodoro. High-gain Er-doped fiber amplifier generating eye-safe MW peak-power, mJ-energy pulses［J］. Opt. Express, 2008, 16(4): 2431～2437

[20] K. Furusawa, A. Malinowski, J. H. V. Price et al.. Cladding pumped Ytterbium-doped fiber laser with holey inner and outer cladding［J］. Opt. Express, 2001, 9(13): 714～720

[21] V. I. Kovalev, R. G. Harison. Suppression of stimulated Brillouin scattering in high-power single-frequency fiber amplifiers［J］. Opt. Lett., 2006, 31(2): 161～163

[22] Y. Eldad, H. Amos. Efficiency optimization of high-power, Er3+-Yb3+-codoped fiber amplifiers for wavelength-division-multiplexing applications［J］. J. Opt. Soc. Am. B, 2003, 20(6): 1189～1197

[23] Y. Wan, H. Po. Dynamic characteristics of double-clad fiber amplifiers for high-power pulse amplification［J］. J. Lightwave Technol., 2003, 21(10): 2263～2270