Influence of precursor concentration on printable mesoscopic perovskite solar cells

Shuangquan JIANG; Yusong SHENG; Yue HU; Yaoguang RONG; Anyi MEI; Hongwei HAN

doi:10.1007/s12200-020-1013-3

[1] Saliba M, Matsui T, Domanski K, Seo J Y, Ummadisingu A, Zakeeruddin S M, Correa-Baena J P, Tress W R, Abate A, Hagfeldt A, Gr?tzel M. Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance. Science, 2016, 354(6309): 206–209

[2] Liu S, Guan Y, Sheng Y, Hu Y, Rong Y, Mei A, Han H. A review on additives for halide perovskite solar cells. Advanced Energy Materials, 2020, 10(13): 1902492

[3] Stranks S D, Eperon G E, Grancini G, Menelaou C, Alcocer M J P, Leijtens T, Herz L M, Petrozza A, Snaith H J. Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber. Science, 2013, 342(6156): 341–344

[4] Jeon N J, Noh J H, Yang W S, Kim Y C, Ryu S, Seo J, Seok S I. Compositional engineering of perovskite materials for highperformance solar cells. Nature, 2015, 517(7535): 476–480

[5] Tong J, Song Z, Kim D H, Chen X, Chen C, Palmstrom A F, Ndione P F, Reese M O, Dunfield S P, Reid O G, Liu J, Zhang F, Harvey S P, Li Z, Christensen S T, Teeter G, Zhao D, Al-Jassim M M, van Hest M F A M, Beard M C, Shaheen S E, Berry J J, Yan Y, Zhu K. Carrier lifetimes of >1 ms in Sn-Pb perovskites enable efficient allperovskite tandem solar cells. Science, 2019, 364(6439): 475–479

[6] Min H, Kim M, Lee S U, Kim H, Kim G, Choi K, Lee J H, Seok S I. Efficient, stable solar cells by using inherent bandgap of α-phase formamidinium lead iodide. Science, 2019, 366(6466): 749–753

[7] Kim M, Kim G H, Lee T K, Choi I W, Choi H W, Jo Y, Yoon Y J, Kim J W, Lee J, Huh D, Lee H, Kwak S K, Kim J Y, Kim D S. Methylammonium chloride induces intermediate phase stabilization for efficient perovskite solar cells. Joule, 2019, 3(9): 2179–2192

[8] Lin R, Xiao K, Qin Z, Han Q, Zhang C, Wei M, Saidaminov M I, Gao Y, Xu J, Xiao M, Li A, Zhu J, Sargent E H, Tan H. Monolithic all-perovskite tandem solar cells with 24.8% efficiency exploiting comproportionation to suppress Sn(ii) oxidation in precursor ink. Nature Energy, 2019, 4(10): 864–873

[9] ie W, Tsai H, Asadpour R, Blancon J C, Neukirch A J, Gupta G, Crochet J J, Chhowalla M, Tretiak S, Alam MA,Wang H L, Mohite A D. High-efficiency solution-processed perovskite solar cells with millimeter-scale grains. Science, 2015, 347(6221): 522–525

[10] Gong X, Li M, Shi X B, Ma H, Wang Z K, Liao L S. Controllable perovskite crystallization by water additive for high-performance solar cells. Advanced Functional Materials, 2015, 25(42): 6671– 6678

[11] Bi D, Yi C, Luo J, Décoppet J D, Zhang F, Zakeeruddin S M, Li X, Hagfeldt A, Gr?tzel M. Polymer-templated nucleation and crystal growth of perovskite films for solar cells with efficiency greater than 21%. Nature Energy, 2016, 1(10): 16142

[12] Zhou Y, Game O S, Pang S, Padture N P. Microstructures of organometal trihalide perovskites for solar cells: their evolution from solutions and characterization. Journal of Physical Chemistry Letters, 2015, 6(23): 4827–4839

[13] McMeekin D P,Wang Z, Rehman W, Pulvirenti F, Patel J B, Noel N K, JohnstonMB, Marder S R, Herz LM, Snaith H J. Crystallization kinetics and morphology control of Formamidinium-Cesium mixedcation lead mixed-halide perovskite via tunability of the colloidal precursor solution. Advanced Materials, 2017, 29(29): 1607039

[14] Nayak P K, Moore D T, Wenger B, Nayak S, Haghighirad A A, Fineberg A, Noel N K, Reid O G, Rumbles G, Kukura P, Vincent K A, Snaith H J. Mechanism for rapid growth of organic-inorganic halide perovskite crystals. Nature Communications, 2016, 7(1): 13303

[15] Noel N K, Congiu M, Ramadan A J, Fearn S, McMeekin D P, Patel J B, JohnstonMB,Wenger B, Snaith H J. Unveiling the Influence of pH on the crystallization of hybrid perovskites, delivering low voltage loss photovoltaics. Joule, 2017, 1(2): 328–343

[16] Etgar L, Gao P, Xue Z, Peng Q, Chandiran A K, Liu B, Nazeeruddin M K, Gr?tzel M. Mesoscopic CH3NH3PbI3/TiO2 heterojunction solar cells. Journal of the American Chemical Society, 2012, 134(42): 17396–17399

[17] Jeon N J, Noh J H, Kim Y C, Yang W S, Ryu S, Seok S I. Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells. Nature Materials, 2014, 13(9): 897–903

[18] Chen J, Xiong Y, Rong Y, Mei A, Sheng Y, Jiang P, Hu Y, Li X, Han H. Solvent effect on the hole-conductor-free fully printable perovskite solar cells. Nano Energy, 2016, 27(Supplement C): 130– 137

[19] Yan K, Long M, Zhang T, Wei Z, Chen H, Yang S, Xu J. Hybrid halide perovskite solar cell precursors: colloidal chemistry and coordination engineering behind device processing for high efficiency. Journal of the American Chemical Society, 2015, 137(13): 4460–4468

[20] Burschka J, Pellet N, Moon S J, Humphry-Baker R, Gao P, Nazeeruddin M K, Gr?tzel M. Sequential deposition as a route to high-performance perovskite-sensitized solar cells. Nature, 2013, 499(7458): 316–319

[21] Bi D, El-Zohry A M, Hagfeldt A, Boschloo G. Unraveling the effect of PbI2 concentration on charge recombination kinetics in perovskite solar cells. ACS Photonics, 2015, 2(5): 589–594

[22] Zhang H, Mao J, He H, Zhang D, Zhu H L, Xie F, Wong K S, Gr?tzel M, Choy W C H. A smooth CH3NH3PbI3 film via a new approach for forming the PbI2 nanostructure together with strategically high CH3NH3I concentration for high efficient planar-heterojunction solar cells. Advanced Energy Materials, 2015, 5(23): 1501354

[23] Wieghold S, Correa-Baena J P, Nienhaus L, Sun S, Shulenberger K E, Liu Z, Tresback J S, Shin S S, Bawendi M G, Buonassisi T. Precursor concentration affects grain size, crystal orientation, and local performance in mixed-ion lead perovskite solar cells. ACS Applied Energy Materials, 2018, 1(12): 6801–6808

[24] Ku Z, Rong Y, Xu M, Liu T, Han H. Full printable processed mesoscopic CH3NH3PbI3/TiO2 heterojunction solar cells with carbon counter electrode. Scientific Reports, 2013, 3(1): 3132

[25] Tian C, Mei A, Zhang S, Tian H, Liu S, Qin F, Xiong Y, Rong Y, Hu Y, Zhou Y, Xie S, Han H. Oxygen management in carbon electrode for high-performance printable perovskite solar cells. Nano Energy, 2018, 53: 160–167

[26] Mei A, Li X, Liu L, Ku Z, Liu T, Rong Y, Xu M, Hu M, Chen J, Yang Y, Gr?tzel M, Han H. A hole-conductor-free, fully printable mesoscopic perovskite solar cell with high stability. Science, 2014, 345(6194): 295–298

[27] Rong Y, Hu Y, Mei A, Tan H, Saidaminov M I, Seok S I, McGehee M D, Sargent E H, Han H. Challenges for commercializing perovskite solar cells. Science, 2018, 361(6408): eaat8235

[28] Ming Y, Xu M, Liu S, Li D,Wang Q, Hou X, Hu Y, Rong Y, Han H. Ethanol stabilized precursors for highly reproducible printable mesoscopic perovskite solar cells. Journal of Power Sources, 2019, 424: 261–267

[29] Rong Y, Hu Y, Ravishankar S, Liu H, Hou X, Sheng Y, Mei A, Wang Q, Li D, Xu M, Bisquert J, Han H. Tunable hysteresis effect for perovskite solar cells. Energy & Environmental Science, 2017, 10(11): 2383–2391

[30] Snaith H J, Abate A, Ball J M, Eperon G E, Leijtens T, Noel N K, Stranks S D, Wang J T, Wojciechowski K, Zhang W. Anomalous hysteresis in perovskite solar cells. Journal of Physical Chemistry Letters, 2014, 5(9): 1511–1515 === Shuangquan Jiang is a master degree candidate in Optics Engineering at Wuhan National Laboratory for Optoelectronics (WNLO), Huazhong University of Science and Technology (HUST), China. He received his B.Sc. degree in Materials Science and Engineering from Xiangtan University, China in 2017. His current research interest is printable mesoscopic perovskite solar cells.