Influencing Mechanisms of Reactive Atmospheres in Laser Additive Manufacturing of Metallic Materials

Dawei Wang; Yangping Dong; Yanhong Tian; Yunjie Bi; Ming Yan

doi:10.3788/CJL202249.1402201

[1] Ngo T D, Kashani A, Imbalzano G et al. Additive manufacturing (3D printing): a review of materials, methods, applications and challenges[J]. Composites Part B, 143, 172-196(2018).

[2] Calignano F, Manfredi D, Ambrosio E P et al. Overview on additive manufacturing technologies[J]. Proceedings of the IEEE, 105, 593-612(2017).

[3] Wang B C, Tao F, Fang X D et al. Smart manufacturing and intelligent manufacturing: a comparative review[J]. Engineering, 7, 738-757(2021).

[4] Gu D D, Zhang H M, Chen H Y et al. Laser additive manufacturing of high-performance metallic aerospace components[J]. Chinese Journal of Lasers, 47, 0500002(2020).

[5] Wang H M. Materials’ fundamental issues of laser additive manufacturing for high-performance large metallic components[J]. Acta Aeronautica et Astronautica Sinica, 35, 2690-2698(2014).

[6] Revilla-León M, Sadeghpour M, Özcan M. A review of the applications of additive manufacturing technologies used to fabricate metals in implant dentistry[J]. Journal of Prosthodontics, 29, 579-593(2020).

[7] Murr L E. Metallurgy principles applied to powder bed fusion 3D printing/additive manufacturing of personalized and optimized metal and alloy biomedical implants: an overview[J]. Journal of Materials Research and Technology, 9, 1087-1103(2020).

[8] Yao Y S, Tang J P, Zhang Y C et al. Development of laser fabrication technology for amorphous alloys[J]. Chinese Journal of Lasers, 48, 0202012(2021).

[9] ASTM International[S](2015).

[10] Lewandowski J J, Seifi M. Metal additive manufacturing: a review of mechanical properties[J]. Annual Review of Materials Research, 46, 151-186(2016).

[11] Zhou Y H, Li W P, Wang D W et al. Selective laser melting enabled additive manufacturing of Ti-22Al-25Nb intermetallic: excellent combination of strength and ductility, and unique microstructural features associated[J]. Acta Materialia, 173, 117-129(2019).

[12] Gibson I, Rosen D W, Stucker B[M]. Additive manufacturing technologies(2010).

[13] Gardan J. Additive manufacturing technologies: state of the art and trends[J]. International Journal of Production Research, 54, 3118-3132(2016).

[14] Zhang J X, Thakkar R, Kulkarni V R et al. Investigation of the fused deposition modeling additive manufacturing I: influence of process temperature on the quality and crystallinity of the dosage forms[J]. AAPS PharmSciTech, 22, 258(2021).

[15] DebRoy T, Mukherjee T, Wei H L et al. Metallurgy, mechanistic models and machine learning in metal printing[J]. Nature Reviews Materials, 6, 48-68(2021).

[16] Gu D D, Meiners W, Wissenbach K et al. Laser additive manufacturing of metallic components: materials, processes and mechanisms[J]. International Materials Reviews, 57, 133-164(2012).

[17] Li S, Zhang Z H, Han S G et al. Application and development of laser technology in the field of material processing[J]. Journal of Netshape Forming Engineering, 12, 76-85(2020).

[18] Lu B H, Li D C, Tian X Y. Development trends in additive manufacturing and 3D printing[J]. Engineering, 1, 85-89(2015).

[19] Liu Z Y, Zhao D D, Wang P et al. Additive manufacturing of metals: microstructure evolution and multistage control[J]. Journal of Materials Science & Technology, 100, 224-236(2022).

[20] Atwood C, Griffith M, Harwell L et al. Laser engineered net shaping (LENS™): a tool for direct fabrication of metal parts[J]. ICALEO, E1-E7(1998).

[21] Deng P, Karadge M, Rebak R B et al. The origin and formation of oxygen inclusions in austenitic stainless steels manufactured by laser powder bed fusion[J]. Additive Manufacturing, 35, 101334(2020).

[22] DebRoy T, Mukherjee T, Milewski J O et al. Scientific, technological and economic issues in metal printing and their solutions[J]. Nature Materials, 18, 1026-1032(2019).

[23] Wang D W, Zhou Y H, Yao X Y et al. Inheritance of microstructure and mechanical properties in laser powder bed fusion additive manufacturing: a feedstock perspective[J]. Materials Science and Engineering A, 832, 142311(2022).

[24] Zhang L C, Chen L Y, Wang L Q. Surface modification of titanium and titanium alloys: technologies, developments, and future interests[J]. Advanced Engineering Materials, 22, 1901258(2020).

[25] Cheng D F, Sun D P, Liu N N. Effects of Ti(C, N) content and sintering temperature on the thickness of β-free layer of graded cemented carbides[J]. Materials Science and Engineering of Powder Metallurgy, 26, 47-54(2021).

[26] Shi Y, Wang J, Jia L et al. Effect of sintering atmosphere on performance of stainless steel porous filter element[J]. Hot Working Technology, 51, 62-64(2022).

[27] Chen B, Shen J H, Ye X X et al. Advanced mechanical properties of powder metallurgy commercially pure titanium with a high oxygen concentration[J]. Journal of Materials Research, 32, 3769-3776(2017).

[28] Wang D W, Zhou Y H, Shen J et al. Selective laser melting under the reactive atmosphere: a convenient and efficient approach to fabricate ultrahigh strength commercially pure titanium without sacrificing ductility[J]. Materials Science and Engineering A, 762, 138078(2019).

[29] Wang D W[D]. Atmosphere-assisted strengthening of the commercially pure titanium produced by laser-based 3D printing: a research on the processing and machaniusms(2019).

[30] Liu L T, Chen C Y, Zhao R X et al. In-situ nitrogen strengthening of selective laser melted Ti6Al4V with superior mechanical performance[J]. Additive Manufacturing, 46, 102142(2021).

[31] Zhao D D, Yang Q, Wang D W et al. Ordered nitrogen complexes overcoming strength-ductility trade-off in an additively manufactured high-entropy alloy[J]. Virtual and Physical Prototyping, 15, 532-542(2020).

[32] Wei W H, Zhang Q, Wu W J et al. Agglomeration-free nanoscale TiC reinforced titanium matrix composites achieved by in situ laser additive manufacturing[J]. Scripta Materialia, 187, 310-316(2020).

[33] Xiao Y M, Yang Y Q, Wu S B et al. Microstructure and mechanical properties of AlSi10Mg alloy manufactured by laser powder bed fusion under nitrogen and argon atmosphere[J]. Acta Metallurgica Sinica (English Letters), 1-15(2021).

[34] Springer H, Baron C, Szczepaniak A et al. Efficient additive manufacturing production of oxide- and nitride-dispersion-strengthened materials through atmospheric reactions in liquid metal deposition[J]. Materials & Design, 111, 60-69(2016).

[35] Wang Z C[D]. Laser arc hybrid activating welding(2014).

[36] Song M H, Lin X, Yang G L et al. Influence of forming atmosphere on the deposition characteristics of 2Cr13 stainless steel during laser solid forming[J]. Journal of Materials Processing Technology, 214, 701-709(2014).

[37] Tani G, Campana G, Fortunato A et al. The influence of shielding gas in hybrid LASER-MIG welding[J]. Applied Surface Science, 253, 8050-8053(2007).

[38] Zhao L, Tsukamoto S, Arakane G et al. Influence of shielding oxygen content on weld homogeneity and fluid flow in laser-arc hybrid welding[J]. Chinese Journal of Lasers, 42, 0603006(2015).

[39] Wysocki B, Maj P, Krawczyńska A et al. Microstructure and mechanical properties investigation of CP titanium processed by selective laser melting (SLM)[J]. Journal of Materials Processing Technology, 241, 13-23(2017).

[40] Yan M, Xu W, Dargusch M S et al. Review of effect of oxygen on room temperature ductility of titanium and titanium alloys[J]. Powder Metallurgy, 57, 251-257(2014).

[41] Wei W H, Wu W J, Fan S Q et al. In-situ laser additive manufacturing of Ti6Al4V matrix composites by gas-liquid reaction in dilute nitrogen gas atmospheres[J]. Materials & Design, 202, 109578(2021).

[42] Saravanan M, Devaraju A, Venkateshwaran N et al. A review on recent progress in coatings on AISI austenitic stainless steel[J]. Materials Today: Proceedings, 5, 14392-14396(2018).

[43] Wang Y M, Voisin T, McKeown J T et al. Additively manufactured hierarchical stainless steels with high strength and ductility[J]. Nature Materials, 17, 63-71(2018).

[44] Pauzon C, Hryha E, Forêt P et al. Effect of argon and nitrogen atmospheres on the properties of stainless steel 316L parts produced by laser-powder bed fusion[J]. Materials & Design, 179, 107873(2019).

[45] Lei Z, Liu X, Wu Y et al. Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes[J]. Nature, 563, 546-550(2018).

[46] Ding Q Q, Zhang Y, Chen X et al. Tuning element distribution, structure and properties by composition in high-entropy alloys[J]. Nature, 574, 223-227(2019).

[47] Dai J J, Zhu J Y, Chen C Z et al. High temperature oxidation behavior and research status of modifications on improving high temperature oxidation resistance of titanium alloys and titanium aluminides: a review[J]. Journal of Alloys and Compounds, 685, 784-798(2016).

[48] Wang X J, Zhang L C, Fang M H et al. The effect of atmosphere on the structure and properties of a selective laser melted Al-12Si alloy[J]. Materials Science and Engineering A, 597, 370-375(2014).

[49] Rakesh C H S, Priyanka N, Jayaganthan R et al. Effect of build atmosphere on the mechanical properties of AlSi10Mg produced by selective laser melting[J]. Materials Today: Proceedings, 5, 17231-17238(2018).

[50] Hu Z H, Zhu H H, Nie X J et al. On the role of atmospheric oxygen into mechanical properties and fracture behavior of selective laser melted AlCu5MnCdVA[J]. Materials & Design, 150, 18-27(2018).

[51] Zhou S Y, Su Y, Wang H et al. Selective laser melting additive manufacturing of 7xxx series Al-Zn-Mg-Cu alloy: cracking elimination by co-incorporation of Si and TiB2[J]. Additive Manufacturing, 36, 101458(2020).

[52] Chen B, Xi X, Tan C W et al. Recent progress in laser additive manufacturing of aluminum matrix composites[J]. Current Opinion in Chemical Engineering, 28, 28-35(2020).

[53] Gong Y Q, Fu G Y, Shi T et al. Local shielding gas model for laser cladding of titanium alloy in open environment[J]. Chinese Journal of Lasers, 47, 1102006(2020).

[54] Li G, Zhang J C, Shi S H et al. Mass distribution of local shielding gas for laser cladding of titanium alloy in open environment[J]. Chinese Journal of Lasers, 46, 0702007(2019).

[55] Borkar T, Gopagoni S, Nag S et al. In situ nitridation of titanium-molybdenum alloys during laser deposition[J]. Journal of Materials Science, 47, 7157-7166(2012).

[56] Mohseni H, Nandwana P, Tsoi A et al. In situ nitrided titanium alloys: microstructural evolution during solidification and wear[J]. Acta Materialia, 83, 61-74(2015).

[57] Leung C L A, Marussi S, Towrie M et al. The effect of powder oxidation on defect formation in laser additive manufacturing[J]. Acta Materialia, 166, 294-305(2019).

[58] Rumman R, Lewis D A, Hascoet J Y et al. Laser metal deposition and wire arc additive manufacturing of materials: an overview[J]. Archives of Metallurgy and Materials, 64, 467-473(2019).

[59] Tan J H, Wong W L E, Dalgarno K W. An overview of powder granulometry on feedstock and part performance in the selective laser melting process[J]. Additive Manufacturing, 18, 228-255(2017).

[60] Cui C S, Uhlenwinkel V, Schulz A et al. Austenitic stainless steel powders with increased nitrogen content for laser additive manufacturing[J]. Metals, 10, 61(2019).

[61] Jargelius-Pettersson R F A. Electrochemical investigation of the influence of nitrogen alloying on pitting corrosion of austenitic stainless steels[J]. Corrosion Science, 41, 1639-1664(1999).

[62] Li G Q, Dong T L. Progresses on applications and fundamental of high nitrogen steels[J]. China Metallurgy, 17, 5-11(2007).

[63] Li Z J, Lü J X, Zou J L et al. Microstructure and mechanical property of joints in laser welding of stainless steels with nitrogen shielding gas[J]. Chinese Journal of Lasers, 43, 1202006(2016).

[64] Becker L, Röttger A, Boes J et al. Processing of a newly developed nitrogen-alloyed ferritic-austenitic stainless steel by laser powder bed fusion: microstructure and properties[J]. Additive Manufacturing, 46, 102185(2021).

[65] Boes J, Röttger A, Theisen W et al. Gas atomization and laser additive manufacturing of nitrogen-alloyed martensitic stainless steel[J]. Additive Manufacturing, 34, 101379(2020).

[66] Song M, Zhou R, Gu J et al. Nitrogen induced heterogeneous structures overcome strength-ductility trade-off in an additively manufactured high-entropy alloy[J]. Applied Materials Today, 18, 100498(2020).

[67] Issariyapat A, Song T T, Visuttipitukul P et al. Development of core-shell-structured Ti-(N) powders for additive manufacturing and comparison of tensile properties of the additively manufactured and spark-plasma-sintered Ti-N alloys[J]. Advanced Powder Technology, 32, 2379-2389(2021).

[68] Issariyapat A, Visuttipitukul P, Umeda J et al. Refined grain formation behavior and strengthening mechanism of α-titanium with nitrogen fabricated by selective laser melting[J]. Additive Manufacturing, 36, 101537(2020).

[69] Issariyapat A, Visuttipitukul P, Song T T et al. Tensile properties improvement by homogenized nitrogen solid solution strengthening of commercially pure titanium through powder metallurgy process[J]. Materials Characterization, 170, 110700(2020).

[70] Kondoh K, Ichikawa E, Issariyapat A et al. Tensile property enhancement by oxygen solutes in selectively laser melted titanium materials fabricated from pre-mixed pure Ti and TiO2 powder[J]. Materials Science and Engineering A, 795, 139983(2020).

[71] Kondoh K, Issariyapat A, Umeda J et al. Selective laser-melted titanium materials with nitrogen solid solutions for balanced strength and ductility[J]. Materials Science and Engineering A, 790, 139641(2020).

[72] Gu R N, Chen P, Zhou Y H et al. Intentional oxidation and laser remelting of highly reflective pure Cu for its high-quality additive manufacturing[J]. Advanced Engineering Materials, 2101138(2021).

[73] Tao Q Y, Wang Z W, Chen G et al. Selective laser melting of CP-Ti to overcome the low cost and high performance trade-off[J]. Additive Manufacturing, 34, 101198(2020).

[74] Ding W W, Chen G, Qin M L et al. Low-cost Ti powders for additive manufacturing treated by fluidized bed[J]. Powder Technology, 350, 117-122(2019).

[75] Dong Y P, Li Y L, Zhou S Y et al. Cost-affordable Ti-6Al-4V for additive manufacturing: powder modification, compositional modulation and laser in situ alloying[J]. Additive Manufacturing, 37, 101699(2021).

[76] Dong Y P, Tang J C, Wang D W et al. Additive manufacturing of pure Ti with superior mechanical performance, low cost, and biocompatibility for potential replacement of Ti-6Al-4V[J]. Materials & Design, 196, 109142(2020).

[77] He Y X, Jiang W H, Li X Y. Far-field propagation of focused Gaussian beam through atmospheric turbulence and effects of adaptive phase compensation[J]. Chinese Journal of Lasers, 38, 0312001(2011).

[78] Michal G M, Ernst F, Heuer A H. Carbon paraequilibrium in austenitic stainless steel[J]. Metallurgical and Materials Transactions A, 37, 1819-1824(2006).

[79] Conrad H. Effect of interstitial solutes on the strength and ductility of titanium[J]. Progress in Materials Science, 26, 123-403(1981).

[80] Eggeler Y M, Vamsi K V, Pollock T M. Precipitate shearing, fault energies, and solute segregation to planar faults in Ni-，CoNi-，and co-base superalloys[J]. Annual Review of Materials Research, 51, 209-240(2021).

[81] Kwasniak P, Garbacz H, Kurzydlowski K J. Solid solution strengthening of hexagonal titanium alloys: restoring forces and stacking faults calculated from first principles[J]. Acta Materialia, 102, 304-314(2016).

[82] Yu Q, Qi L, Tsuru T et al. Origin of dramatic oxygen solute strengthening effect in titanium[J]. Science, 347, 635-639(2015).

[83] Luo S D, Song T, Lu S L et al. High oxygen-content titanium and titanium alloys made from powder[J]. Journal of Alloys and Compounds, 836, 155526(2020).

[84] Jiang S H, Wang H, Wu Y et al. Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation[J]. Nature, 544, 460-464(2017).

[85] Traore S, Schneider M, Koutiri I et al. Influence of gas atmosphere (Ar or He) on the laser powder bed fusion of a Ni-based alloy[J]. Journal of Materials Processing Technology, 288, 116851(2021).

[86] Zhao C, Parab N D, Li X X et al. Critical instability at moving keyhole tip generates porosity in laser melting[J]. Science, 370, 1080-1086(2020).