Effect of Laser Shock on Microstructure of the Repair Layer of E690 High Strength Steel by Laser Cladding

Yupeng CAO; Shuai WANG; Weidong SHI; Ming QIU; Guoran HUA; Bin LI

doi:10.3788/gzxb20215004.0414001

[1] Binshi XU, Shiyun DONG, MEN Ping等. Quality characteristics and nondestructive test and evaluation technology for laser additive manufacturing alloy steel components （invited）. Infrared and Laser Engineering, 47, 0401001(2018).

[2] Guizhong LIU, Wenhua ZHONG, Yuan GAO et al. Formation and resolving method of the structure defect about laser cladding coatings. Surface Technology, 41, 89-92(2012).

[3] Shixing YAN, Shiyun DONG, Binshi XU等. Mechanics of removing residual stress of Fe314 cladding layers with laser shock processing. Chinese Journal of Lasers, 40, 1003004(2013).

[4] Cheng WANG, Zhilin LAI, Zhibin AN等. Properties improvement of laser cladded TC4 Titanium alloy by laser shock processing. Journal of Jiangsu University（Natural Science Edition）, 34, 331-334(2013).

[5] Weifeng HE, Jin ZHANG, Zhuojun YANG等. Fatigue properties research of titanium alloy repaired by laser cladding and laser shock processing. Chinese Journal of Lasers, 42, 1103008(2015).

[6] Kaiyu LUO, Yang ZHOU, Jinzhong LU等. Influence of laser shock peening on microstructure and property of cladding layer of 316L stainless steel. Chinese Journal of Lasers, 44, 0402005(2017).

[7] Peiyu ZHANG, Cheng WANG, Mengyun XIE等. Effect of laser shock processing on microstructure and properties of K403 alloy repaired by laser cladding. Infrared and Laser Engineering, 46, 0906003(2017).

[8] Yihu LIU, Yongquan WU, Tong SHENG等. Molecular dynamics simulation of phase transformation of γ-Fe→δ-Fe→liquid-Fe in continuous temperature-rise process. Acta Metallurgica Sinica, 46, 172-178(2010).

[9] Xing HE, Dejun KONG, Renguo SONG. Influence of power on microstructure and properties of laser cladding Al-TiC-CeO2 composite coatings. Rare Metal Materials and Engineering, 48, 3634-3642(2019).

[10] Hui ZHANG, Yi PAN, Yizhu HE et al. Laser cladding FeCoNiCrAl₂Si high-entropy alloy coating. Acta Metallurgica Sinica, 47, 1075-1079(2011).

[11] R TRIVEDI, W KURZ. Morphological stability of a planar interface under rapid solidification conditions. Acta Metallurgica, 34, 1663-1670(1986).

[12] Wenjun QI, Suncheng WANG, Xuemin CHEN等. Effective nucleation phase and grain refinement mechanism of Al-5Ti-1B master alloy. Chinese Journal of Rare Metals, 37, 179-185(2013).

[13] Jinzhong LU, Liujun WU, Guifang SUN et al. Microstructural response and grain refinement mechanism of commercially pure titanium subjected to multiple laser shock peening impacts. Acta Materialia, 127, 252-266(2017).

[14] Song NI, Xiaozhou LIAO, Yuntian ZHU. Effect of severe plastic deformation on the structure and mechanical properties of bulk nanocrystalline metals. Acta Metallurgica Sinica, 50, 156-168(2014).

[15] Songbo WEI, Qinwu CAI, Di TANG等. In situ SEM study of dynamic tensile in wrought magnesium alloy AZ31B rolling sheet. Journal of Plasticity Engineering, 16, 155-160(2009).

[16] Tingjie ZHANG. Electron microscopy study on phase transformation of titanium alloys （Ⅱ）——The crystalline structure of the two basic phases of titanium and its alloys and their possible lattice defects. Rare Metal Materials and Engineering, 54-60(1989).

[17] Lin XIAO, Juli BAI. Biaxial fatigue behavior and microscopic deformation mechanism of zircaloy-4. Acta Metallurgica Sinica, 36, 919-925(2000).

[18] Shidong XU, Xudong REN, Wangfan ZHOU等. Research of cell-grain refinement and dislocation strengthening of laser shock processing on GH2036 alloy. Chinese Journal of Lasers, 43, 0103001(2016).

[19] J MOON, S J KIM. Effect of thermo-mechanical cycling on the microstructure and strength of lath martensite in the weld CGHAZ of HSLA steel. Materials Science & Engineering A, 528, 7658-7662(2011).

[20] P FARAHMAND, R KOVACEVIC. An experimental–numerical investigation of heat distribution and stress field in single- and multi-track laser cladding by a high-power direct diode laser. Optics & Laser Technology, 63, 154-168(2014).

[21] Mengqing ZHANG, Yulin QIAO, Xiaochao JI等. Effect of coil-scanning-speed on microstructures and properties of NiCrBSi coating by induction cladding method. Materials Reports, 34, 6120-6125(2020).

[22] Yongjun HUANG, Xiaoyan ZENG. Investigation on cracking behavior of Ni-based coating by laser-induction hybrid cladding. Applied Surface Science, 256, 5985-5992(2010).

[23] D HOEMBERG, Q LIU, J MONTALVO-URQUIZO et al. Simulation of multi-frequency-induction-hardening including phase transitions and mechanical effects. Finite Elements in Analysis & Design, 121, 86-100(2016).

[24] P FARAHMAND, R KOVACEVIC. Laser cladding assisted with an induction heater （LCAIH） of Ni-60%WC coating. Journal of Materials Processing Technology, 222, 244-258(2015).

[25] Dean DENG, Yanbin ZHANG, Suo LI等. Influence of solid-state phase transformation of residual stress in P92 steel welded joint. Acta Metallurgica Sinica, 52, 394-402(2016).

[26] Bo LIU, Kaiyu LUO, Liujun WU et al. Effect to laser shock processing on property and microstructure of AM50 magnesium alloy. Acta Optica Sinica, 36, 0814003(2016).

[27] Yupeng CAO, Liangchen GE, Aixin FENG等. Effect of shock wave propagation mode on residual stress distribution of laser shock 7050 aluminum alloy. Surface Technology, 48, 195-202+220(2019).