[1] OGWU A A, BOUQUEREL E, ADEMOSU O, et al. The influence of rf power and oxygen flow rate during deposition on the optical transmittance of copper oxide thin films prepared by reactive magnetron sputtering[J]. Journal of Physics D: Applied Physics, 2005, 38(2): 266271.
[2] SERIN N, SERIN T, HORZUM S, et al. Annealing effects on the properties of copper oxide thin films prepared by chemical deposition[J]. Semiconductor Science and Technology, 2005, 20(5): 398401.
[3] WIJESUNDERA R P. Fabrication of the CuO/Cu2O heterojunction using an electrodeposition technique for solar cell applications[J]. Semiconductor Science and Technology, 2010, 25(4): 045015045019.
[4] OLSEN L C, BOHARA R C, URIE M W. Explanation for lowefficiency Cu2O Schottkybarrier solar cells[J]. Appled Physics Letters, 1979, 34(1): 4749.
[5] MITTIGA A, SALZA E, SARTO F, et al. Heterojunctionsolarcell with 2% efciency based on a Cu2O substrate[J]. Appled Physics Letters, 2006, 88(16): 163502(12).
[6] IWANOWSKI R J, TRIVICH D. Enhancement of the photovoltaic conversion efficiency in Cu/Cu2O Schottky barrier solar cells by H+ ion irradiation[J]. Physica Status Solidi A, 1986, 95(2): 735741.
[7] WADIA C, ALIVISATOS A P, KAMMEN D M. Materials availability expands the opportunity for largescale photovoltaics deployment[J]. Environmental Science & Technology, 2009, 43(6): 20727.
[8] RAY S C. Preparation of copper oxide thin film by the solgellike dip technique and study of their structural and optical properties[J]. Solar Energy Materials & Solar Cells, 2001, 68(34): 307312.
[9] HOA N D, AN S Y, DUNG N Q, et al. Synthesis of ptype semiconducting cupric oxide thin films and their application to hydrogen detection[J]. Sensors and Actuators B: Chemical, 2010, 146(1): 239244.
[10] LANGGORD J I, WILSON A J C. Scherrer after sixty years: a survey and some new results in the determination of crystallite size[J]. Journal of Applied Crtstallography, 1978, 11(2): 102113.
[11] MARKWORTH P R, CHANG P R H, SUN Y, et al. Epitaxial stabilization of orthorhombic cuprous oxide films on MgO (110)[J]. Journal of Materials Research, 2000, 16(4): 914921.
[12] MOHEMMED SHANID N A, ABDUL M. Khadar. Evolution of nanostructure, phase transition and band gap tailoring in oxidized Cu thin films[J]. Thin Solid Films, 2008, 516(18): 62456252.
[13] JANA S, DAS S, DAS N S, et al. CuO nanostructures on copper foil by a simple wet chemical route at room temperature[J]. Materials Research Bulletin, 2010, 45(6): 693698.
[14] DING Wenge, YUAN Jing, LI Wenbo, et al. Thickness and optical constants calculation of hydrogenated amorphous silicon film based on transmission and reflectance spectra[J]. Acta Photonica Sinica, 2011, 40(7): 10961100.
[15] RAEBIGER Hannes, LANY Stephan, ZUNGER Alex. Origins of the ptype nature and cation deficiency in Cu2O and related materials[J]. Physical Review B, 2007, 76(4): 045209(15).
[16] WU Dangxin, ZHANG Qiming, TAO Meng. LSDA+U study of cupric oxide: electronic structure and native point defects[J]. Physical Review B, 2006, 73(23): 235206(16).
[17] KAWAZOE H, YASUKAWA M, HYODO H, et al. Ptype electrical conduction in transparent thin films of CuAlO[J]. Nature, 1997, 389(6654): 939942.
[18] GHOSH R, BASAK D. Electrical and ultraviolet photoresponse properties of quasialigned ZnO nanowires/pSi heterojunction[J]. Applied Physics Letters, 2007, 90(24): 243106(13).
[19] LAU H W, TAN O K, TRIGG D A, Charge injection and tunneling mechanism of solid state reaction silicon nanocrystal film[J]. Applied Physics Letters, 2006, 89(11): 113119(13).
[20] SOGA T, KOKUBU T, HAYASHI Y, et al. Effect of rf power on the photovoltaic properties of borondoped amorphous carbon/ntype silicon junction fabricated by plasma enhanced chemical vapor deposition[J]. Thin Solid Films, 2005, 482(12): 8689.
[21] TATAR B, KUTLU K, RGEN M. Synthesis of βFeSi2/Si heterojunctions for photovoltaic applications by unbalanced magnetron sputtering[J]. Thin Solid Films, 2007, 516(1): 1316.