Structure Design of a Fast Adjustment Mechanism in the Image Spin Compensation System

YAN Yong-yao; LIU Wei; FU Jin-jiang; YUAN Ting

doi:10.3788/gzxb20164506.0622002

[1] WANG Jun-shan, ZHAI Lin-pei, DING Ya-lin, et al. Characteristic analysis and correction technique about the image rotation of aerial camera ［J］. Infrared and Laser Engineering, 2008, 37(5) 493-496.

[2] XU Yong-sen, DING Ya-lin, TIAN Hai-ying, et al. Analysis of image motion compensation accuracy for aerial push-broom sensor［J］. Optics and Precision Engineering, 2009, 17(2): 453-459.

[3] WANG Zhi-chen, ZHAO Yong-zhi, ZHOU Chao. Design of K mirror for alt-az telescope［J］. Acta Photonica Sinica, 2012, 41(7): 762-765

[4] WANG Dai, LI Xiao-yan, WU Qin-zhang. Design of eliminating image rotation on opto-electronic imaging tracking and measuring device［J］. Opto-Electronic Engineering, 2012, 39(1): 108-112.

[5] OSTASZEWSKI M, VERMEER W. Fine steering mirror for the james webb space telescope［C］. SPIE, 2007, 6665: 66650D.

[6] ZHANG Jian-xiong, SUN Bao-yuan. Design and analysis of 2-DOF nanopositioning stage based on dual flexure hinges［J］, Piezoelectectrics&Acoustooptics, 2006, 28(5): 624-626.

[7] TIAN Xue-guang, TIAN Xing-zhi, LIU Xuan, et al. Development of angular micro driving device for large-scale and high accurate turntable［J］.Optics and Precision Engineering, 2010, 18(5): 1112-1118.

[8] YIN Tie. Structure design of shafting fast steering mirror with flexible bearing［J］.Electro-optic Technology Application, 2012, 27(3): 22-25.

[9] PENG Hai-feng, SUN Zhen. Design and analysis of a precision axial adjusting mechanism for optical elements in lithographic lens［J］. Acta Photonica Sinica, 2014, 43(04): 113-117.

[10] DEVRIES J, NEILL D, HILEMAN E. LSST telescope primary/tertiary mirror hardpoints［C］. SPIE, 2010; 7739: 77391J.

[11] LIANG Biao, LIU Wei, CHEN Cheng. Design of supporting structure for plane grating and surface deformation calculation［J］. Acta Photonica Sinica, 2011, 40(10): 1514-1520.

[12] KIM K, GWEON D, CHOI N, et al. Design and modeling of XYθ H type stage using 1 rotational DOF flexure joint［C］. 2011 International Conference on Photonics, 3D-Imaging, and Visualization: SPIE, 2011. p. 820518.

[13] YU Jing-jun, PEI Xu, SUN Ming-lei, et al. A new large-stroke compliant joint & micro/nano positioner design based on compliant building blocks［C］. ASME/IFToMM International Conference on Reconfigurable Mechanisms and Robots: IEEE, 2009. p. 409-16.

[14] REN Ning, GENG Tie, ZHOU Feng. Analysis and application of rigidity of four kinds of composite flexural hinge［J］.Journal of Mechanical Transmission, 2013, 37(10): 119-122.

[15] CHEN Gui-min, JIA Jian-yuan, LI Zhi-wu. Right-circular corner-filleted flexure hinges［C］. 2005 IEEE International Conference on Automation Science and Engineering: IEEE, 2005. p. 249-53.

[16] COWPER G R. The shear coefficient in timoshenko's beam theory［J］. Journal of Applied Mechanics, 1966, 33: 335-40.

[17] CHEN Gui-min, WANG Jia-lu, LIU Xiao-yuan. Generalized equations for estimating stress concentration factors of various notch flexure hinges［J］. Journal of Mechanical Design, 2014, 136: 031009.