Abstract
Keywords
1 Introduction
On-chip integrated photonic devices exhibit great potential for applications in many fields, including optical communications,1,2 quantum gates,3,4 signal processing,5,6 and computing.7,8 To fully demonstrate the functionalities of integrated photonic devices, it is essential to manipulate on-chip photonic modes like controlling free-space light beams, such as beam focusing, bending, and steering.9,10 As primary functions, these manipulations are basic elements for the creation of further devices and systems. For example, the graded-index waveguide-based on-chip focusing lenses have been used as mode spot size converters and 4f systems,11
The continued pursuit in highly integrated nanophotonic circuits has fueled the flourishing of surface plasmon polaritons (SPPs) (electromagnetic waves coupled to collective oscillations of free electrons in a conductor)19
Because of its two-dimensional nature and thus all surfaces, as well as its negative effective permittivity, graphene has been shown to support SPPs called graphene plasmon polaritons (GPPs)—electromagnetic waves coupled to collective oscillations of conduction band electrons within graphene—in the mid-infrared (MIR) to terahertz (THz) spectrum,29
Sign up for Advanced Photonics Nexus TOC. Get the latest issue of Advanced Photonics Nexus delivered right to you!Sign up now
In this work, based on the well-established planar dielectric grating and the concept of graded-index materials, we propose a practical stratagem to achieve the achromatic on-chip focusing of the AGPPs by devising a graded-index waveguide array lens (GIWAL). By studying the mode properties of the AGPPs supported by the GIWAL, we provide an analytical model to understand the complete physics underlying the on-chip focusing and other beam evolution behaviors, such as self-focusing, self-collimation, and pendulum effects of Gaussian beams as well as spatial inversions of digital optical signals, which are attributed to the superposition of all orthogonal AGPP modes along the propagation direction. The designed GIWAL, which resembles the Mikaelian lens developed from well-known Maxwell’s fish-eye lens by utilizing conformal transformation optics,43,44 can converge periodically light waves at the central axis of the lens. By adjusting the filling factor of the dielectric grating in the GIWAL, the modal index of the lens is designed and thus the desired graded index profile of Mikaelian lens is obtained, which can be analytically understood and quantitatively predicted with the effective index method of the AGPPs propagating in a periodic two-medium slab waveguide. The theoretical designs certified by numerical simulations prove how the achromatic on-chip focusing of the AGPPs with a focus as small as about ( is the working wavelength in free space) within the frequency band from 10 to 20 THz can be achieved in the GIWAL. As an application case, we establish the possibility of using the GIWAL as a spatial inverter for broadband digital optical signals. The high agreement between theoretical results and numerical simulations from COMSOL Multiphysics confirms the immense potential of the presented analytical scheme for greatly simplifying the design of such a configuration in experimental fabrication.
2 Results and Discussion
Figure 1(a) schematically reveals the proposed scenario to support the excitation and propagation of the AGPPs and to achieve the achromatic on-chip focusing of the AGPPs based on the GIWAL, which could be fabricated by covering graphene onto a dielectric grating on top of a metallic substrate. In such a structure, as one of the possible methods, with the diffraction from the coupling grating, the -polarized light incident along the direction could be coupled to the AGPPs maintained at the dielectric grating between the metallic substrate and graphene and traveling along the axis (see Sec. 3 in the Supplementary Material for coupling details). The cross section of the GIWAL is shown in Fig. 1(b). In the frequency band we consider, the metallic substrate acts like a perfect electrical conductor, which can insulate the diffusion of the electromagnetic field, thereby reducing the size of the AGPP modes and further increasing the concentration of the electromagnetic energy. The whole configuration is surrounded by air, and thus . Furthermore, the dielectric grating is envisioned as of thickness and relative permittivity . The grating period is fixed at 150 nm, whereas the dielectric strip’s width in each unit cell is variable, which allows one to obtain a desired mode index profile by rationally arranging dielectric strips of suitable widths.
Figure 1.Achromatic on-chip focusing lenses and mode properties of the AGPPs propagating within a single unit cell of the GIWAL. (a) Schematic structure of the coupling grating and the GIWAL. (b) Cross section of the GIWAL and Cartesian coordinate system employed. Dependences of (c) the effective refractive index and (d) the propagation length of the AGPPs on the width of the dielectric strip for different frequencies of the incident lights. The solid and dashed curves represent analytic results, and the circles, triangles, and squares on the corresponding curves represent numerical simulations. The inset in (c) represents the cross section of a single unit cell of the GIWAL.
According to the idea of the effective index method,45
To achieve the achromatic on-chip focusing of the AGPPs, the effective refractive index distribution of the GIWAL needs to satisfy a certain function. To find the form of the function, we briefly turn our attention back to the well-known Mikaelian lens. The refractive index profile of Mikaelian lens, which can be extracted from Maxwell’s fish-eye lens by an exponential conformal mapping, exhibits a symmetrical distribution of ,43,44,48 as shown by the red curve in Fig. 2(a), where is the gradient coefficient and is the maximum refractive index at the central axis of the lens. Within the framework of geometric optics, light is regarded as classical particles, and the only thing that matters is its trajectories. According to the eikonal theory and the variational method, the trajectory equation of the light ray incident perpendicular to the axis on the plane in the Mikaelian lens can be derived as (see Sec. 5 in the Supplementary Material for details)
Figure 2.On-chip focusing and optical pendulum effects of the AGPPs in the GIWAL and mode properties of the AGPPs supported by the entire GIWAL. (a) Refractive index profile and (b) the propagation constant of the waveguide modes for Mikaelian lens (red), precise GIWAL (green), and stepped GIWAL (blue), respectively. (c) Normalized electric field
As a demonstration case, the GIWAL is assumed to have 61 unit cells, as shown in Fig. S7 in the Supplementary Material. To satisfy the refractive index profile of the Mikaelian lens with a focal length of shown by the red curve in Fig. 2(a), the widths of the dielectric strip of each unit cell in the GIWAL () are set as 130.0, 129.9, 129.4, 128.7, 127.7, 126.4, 124.8, 123.0, 120.9, 118.6, 116.0, 113.2, 110.2, 107.0, 103.5, 99.9, 96.2, 92.3, 88.2, 84.1, 79.8, 75.5, 71.0, 66.5, 62.0, 57.4, 52.8, 48.2, 43.6, 39.0, and 34.4 nm, respectively, according to the theoretically calculated dependence of on shown in Fig. 1(c). The refractive index profile of this precise GIWAL is shown as the green curve in Fig. 2(a). To improve the tolerance for manufacturing errors, the step in the dielectric strip’s width is chosen to be 5 nm, thus become 130, 130, 130, 130, 130, 125, 125, 125, 120, 120, 115, 115, 110, 105, 105, 100, 95, 90, 90, 85, 80, 75, 70, 65, 60, 55, 55, 50, 45, 40, and 35 nm, respectively. The refractive index profile of this stepped GIWAL is shown as the blue curve in Fig. 2(a). There is no essential difference in the propagation properties of the AGPPs between the two GIWALs, as shown in Fig. S8 in the Supplementary Material. We first apply an extended coupling grating to couple the incident light to the AGPP modes, which then propagate along the direction in the GIWAL. The normalized electric field of the AGPPs on the plane in the stepped GIWAL is shown in Fig. 2(e). The AGPPs achieve periodic focusing at in the stepped GIWAL, confirming the validity of the theoretical design. Furthermore, owing to the inherent loss of the AGPPs, the focusing energy gradually decreases with increasing propagation distance. The counterpart of Fig. 2(e) excluding losses is shown in Fig. S9(a) in the Supplementary Material. By comparing Fig. 2(e) and Fig. S9(a) in the Supplementary Material, it can be found that losses do not affect the overall behavior of the on-chip focusing, except for weakening the magnitude of the electric field of the AGPP modes. Figure 2(f) reveals the normalized electric field of the AGPPs coupled by the local coupling grating, exhibiting an analog of the optical pendulum effect. The energy flow is very consistent with the ray trajectory from geometrical optics shown in Fig. 2(d). For comparison, the corresponding without losses is shown in Fig. S9(b) in the Supplementary Material. The wonderful identity between ray trajectories within geometrical optics and numerical simulations based on wave optics could be attributed to two reasons. On the one hand, each unit cell can be viewed as a homogeneous medium characterized by the corresponding effective refractive index because the AGPP wavelength is much larger than the period Λ of the GIWAL. On the other hand, since the AGPP wavelength is much smaller than the GIWAL scale, the light-ray approximation is satisfied.43 This excellent property suggests that our proposed GIWAL could work in the geometrical optics limit and wave optics fields simultaneously.
To further understand the physical process of the on-chip focusing and the beam evolution, we now analyze propagation properties of the AGPPs supported by the entire GIWAL based on wave optics. For simplicity, we ignore losses here, which do not destroy the physical nature of the on-chip focusing and the beam evolution, as mentioned above. Continuing the effective index method used above, the entire GIWAL resembles a waveguide with a graded refractive index of . Since the electric field of the AGPPs lies mainly on the axis, they are transverse electric modes propagating along the direction for this effective waveguide. Thus the dispersion relation satisfied by the AGPPs can be written as (see Sec. 9 in the Supplementary Material for details)
According to the analytical theory described in Sec. 9 in the Supplementary Material, the electric field component of the th order AGPP mode along the axis on the plane in the GIWAL is
The coupling grating can couple the incident light to the AGPP modes, which then propagate along the direction to the incident end of the GIWAL. The polaritons at the incident end can excite different orders of the AGPP modes supported by the GIWAL, and these modes then interfere with each other, generating different intensity patterns in the GIWAL depending on the profile of the light beam at the incident end. If the electric field at the incident end of the GIWAL is at , its evolution on the plane in the GIWAL can be represented by the superposition of all orthogonal AGPP modes as described as follows:
The interpretation for the beam evolution is mathematically rigorous, as discussed in Sec. 11 in the Supplementary Material. When the coupling grating is extended or local, the electric field at the incident end of the GIWAL can be regarded as or , where the latter is similar to a Gaussian beam, and and are the incident point on the axis and characteristic width of the Gaussian beam, respectively. According to Eq. (6), the analytically calculated electric field evolutions are shown in Figs. 2(g) and 2(h), corresponding to the excitation from the extended and local coupling gratings, respectively. The great consistency between analytical results of Figs. 2(g) and 2(h) and numerical simulations of Figs. 2(e) and 2(f) confirms our physical interpretation for the on-chip focusing and the beam evolution of the AGPPs in the GIWAL. Finally, we consider losses in the analytical model with a less rigorous way by adding an absorption coefficient of extracted from the numerical simulation. At this time, the electric field of the beam evolution becomes , and the corresponding are illustrated in Figs. 2(i) and 2(j), respectively. In addition, the self-focusing and self-collimating of Gaussian beams in the GIWAL are also demonstrated (see Sec. 12 in the Supplementary Material for details).
One of the outstanding characteristics of graphene is that its optoelectronic properties characterized by its surface conductivity can be actively tuned by adjusting its chemical potential via electrostatic gates.49 This advantage allows us to in situ couple the incident light of different frequencies within the ultrabroad spectrum to the AGPP modes while keeping the structure of the coupling grating unchanged. As demonstrated by previous experimental works,50,51 electrical control of the chemical potential of graphene can be achieved by depositing metal electrodes on graphene. An additional electron beam lithography process and electronic beam evaporation could be used to define the electrodes. As discussed in Sec. 3 in the Supplementary Material, we set the filling factor and period of the coupling grating to be and ; thus, the wave vector of the first-order diffraction wave along the direction is according to the grating equation ( is the diffraction order).52 To satisfy the phase-matching condition , ( is the propagation constant along the direction of the AGPPs supported by the coupling grating) so that the incident light can be efficiently coupled to the AGPPs, we electrically tune the chemical potentials of graphene to be 0.22, 0.50, and 0.89 eV for the incident frequencies of 10, 15, and 20 THz, respectively. The coupling grating couples the incident light to the AGPP modes, which then propagate through the GIWAL along the direction. The most impressive performance is that the on-chip focusing of the AGPPs is free of chromatic aberration in the GIWAL. As shown in Fig. 3(a), the distributions of the normalized electric field indicate that the focus hardly moves for the incident light of different frequencies in the range from 10 to 20 THz. The physics of this dispersion-free property is attributed to the wavelength-independent refractive index profile of the GIWAL, as shown in Fig. 3(b). This essentially arises from the wavelength-independent and chemical potentially independent variation trend of versus shown in Fig. 1(c) and Fig. S2(c) in the Supplementary Material. The excellent achromatic on-chip focusing capability demonstrates that the GIWAL is spatially identical for broadband light of different operating wavelengths, enabling on-chip color imaging, signal processing of ultrashort pulses, and broadband optical manipulation. Moreover, the full-width at half-maximum of the focal point is almost always as small as about for the incident lights of different frequencies, which is crucial for broadband high-quality nanoimaging and nanolithography and miniaturized on-chip optoelectronics for long-wavelength applications.
Figure 3.Achromatic on-chip focusing of the AGPPs in the GIWAL. (a) Normalized electric field
We have demonstrated the achromatic on-chip focusing of the AGPPs in the GIWAL in the previous sections; this may find applications in miniaturized broadband on-chip photonics devices for optical communication and signal processing in the long-wavelength spectrum. As one of the potential prospects based on this remarkable performance, we here indicate the possibility that the proposed GIWAL could act as a spatial inverter for broadband digital optical signals. It is well known that, in computer science and digital signal processing, information is viewed as a string of bits: “0” or “1.”53 To mimic this binary concept, we encode the digital optical signal as “0” or “1,” depending on its intensity of 0 or 1, which can be defined by designing the structure of the coupling grating (see Sec. 3 in the Supplementary Material for details). According to the trajectories of rays in Fig. 2(d), if the length of the GIWAL along the direction is taken as , the spatial positions of the output point and input point of the ray are symmetrical with respect to the line of . Now replace “rays” with “digital optical signals,” which are also symmetrical with respect to the line of . Therefore, at (the input end of the GIWAL), along the axis, an incident digital optical signal encoded as “10001000100010001000” is inverted to the sequence “00010001000100010001” at the output end (i.e., ) after passing through the GIWAL, as shown in Figs. 4(a) and 4(b). This can also be predicted by our proposed analytical theory (see Sec. 13 in the Supplementary Material for details). Moreover, different digital optical signals carried by the incident lights of other frequencies, which are generated on demand by designing the structure of the coupling grating, can also be inverted spatially at the output end after passing through the GIWAL, as shown in Figs. 4(c)–4(f). The broadband spatial inverter based on the achromatic GIWAL may play an important role in advanced optical communication technologies, such as wavelength division multiplexing.
Figure 4.Spatial inverter for broadband digital optical signals based on the achromatic GIWAL. Normalized electric field
3 Materials and Methods
All numerical simulations involved in this study are performed with the commercially available finite-element method package (COMSOL Multiphysics). The adequately thick metallic substrate is made of aluminum with a relative permittivity of ,54 where is the angular frequency of the incident light and are the metallic damping constant and plasma frequency, respectively. Moreover, graphene is regarded as an infinitely thin surface, and its optoelectronic properties are described by a surface conductivity , which can be evaluated using a Drude-like expression of at the room temperature and within the frequency band of our interest,30,55,56 where and are the charge of an electron and the reduced Planck’s constant, respectively. The relaxation rate and chemical potential are set as and unless otherwise stated.
4 Conclusion
We propose a GIWAL to support the propagation of the AGPPs and to enable the achromatic on-chip focusing of the AGPPs with a focus as small as about in the frequency band from 10 to 20 THz, benefiting from the wavelength-independent refractive index profile of the GIWAL. Furthermore, we demonstrate the possibility that the GIWAL could be used as a spatial inverter for broadband digital optical signals, indicating that the GIWAL has great potential value in broadband digital coding communication and digital optical signal processing. Moreover, we provide an analytical understanding to explain the physical process of the achromatic on-chip focusing and beam evolution of the AGPPs in the GIWAL, which agrees very well with numerical simulations. Importantly, the proposed GIWAL can also operate in other wavelength bands of interest or be used as other possible optoelectronic devices by rationally tuning parameters of the structures and materials. In this context, the presented theoretical design principle and analytical physical model are more rapid and computationally compact methods to predict the configuration of such structures.
Zhiyong Wu received his master’s degree in optics from Shenzhen University in 2021. He is currently a PhD student at the School of Microelectronics Science and Technology of Sun Yat-sen University, China. His research focuses on the physical properties of graphene plasmonics and on-chip optoelectronics based on graphene plasmons.
Zhengji Xu received his BEng and PhD degrees from Nanyang Technological University, Singapore, in 2010 and 2016, respectively. He is an associate professor and assistant dean at the School of Microelectronics Science and Technology, Sun Yat-sen University, China. He worked as a scientist at the Institute of Microelectronics, A*STAR (Agency for Science, Technology and Research), Singapore, from November 2017 to March 2020. His research interests include flat optics, plasmonics, nanofabrication, and nanophotonics integration.
References
[9] X. Luo. Multiscale optical field manipulation via planar digital optics. ACS Photonics(2023).
[10] X. Luo. Metasurface waves in digital optics. J. Phys.: Photonics, 2, 041003(2020).
[19] L. N. Quan et al. Nanowires for photonics. Chem. Rev., 119, 9153-9169(2019).
[21] F. J. Garcia-Vidal et al. Spoof surface plasmon photonics. Rev. Mod. Phys., 94, 025004(2022).
[30] P. A. D. Gonalves, N. M. R. Peres. An Introduction to Graphene Plasmonics(2016).
[46] H. G. Unger. Planar Optical Waveguides and Fibres(1977).
[47] A. Yariv, P. Yeh. Photonics: Optical Electronics in Modern Communications(2007).
[53] B. C. Kress, P. Meyrueis. Applied Digital Optics(2009).
Set citation alerts for the article
Please enter your email address