[1] CHEN L, XIA Y F, LI B W, et a1. Flame front inclination instability in the porous media combustion with inhomogeneous preheating temperature distribution[J]. Appl Therm Eng, 2018, 128(5): 1520-1530.
[2] TOLEDO M, GRACIA F, CARO S, et al. Hydrocarbons conversion to syngas in inert porous media combustion[J]. Int J Hydrog Energy, 2016, 41(14): 5857-5864.
[3] PAN J F, WU D, LIU Y X, et al. Hydrogen/oxygen premixed combustion characteristics in micro porous media combustor[J]. Appl Energy, 2015, 160(15): 802-807.
[5] ORTONA A, PUSTERLA A, FINO P, et al. Aging of reticulated Si-SiC foams in porous burners[J]. Adv Appl Ceram, 2010, 109(6): 246-251.
[6] WW Xu, XIA F, CHEN L, et al. High-temperature mechanical and thermodynamic properties of silicon carbide polytypes[J]. J Alloy Compd, 2018, 768(5): 722-732.
[8] D?ANGELO C, ORTONA A, COLOMBO P. Finite element analysis of reticulated ceramics under compression[J]. Acta Mater, 2012, 60(19): 6692-6702.
[9] JUN I, KONG Y, LEE S, et al, Reinforcement of a reticulated porous ceramic by a novel infiltration technique[J]. J Am Ceram Soc, 2006, 89 (7): 2317-2319.
[10] OPILA E J, SERRA J L . Oxidation of carbon fiber-reinforced silicon carbide matrix composites at reduced oxygen partial pressures[J]. J Am Ceram Soc, 2011, 94 (7): 2185-2192.
[11] LIANG X, LI Y W, LIU J, et al. Fabrication of SiC reticulated porous ceramics with multilayered struts for porous media combustion[J]. Ceram Int, 2016, 42(11): 13091-13097.
[13] YAO X, YANG Y, LIU X, et al. Effect of recoating slurry compositions on the microstructure and properties of SiC reticulated porous ceramics[J]. J Eur Ceram Soc, 2013, 33(15/16): 2909-2914.
[14] VOGT U F, GORBAR M, DIMOPOULOS-EGGENSCHWILER P, et al. Improving the properties of ceramic foams by a vacuum infiltration process[J]. J Eur Ceram Soc, 2010, 30(15): 3005-3011.
[15] LIANG X, LI Y W, HE Z , et al. Design of three-layered struts in SiC reticulated porous ceramics for porous burner[J]. Ceram Int, 2019, 45(7): 8571-8576.
[16] LIANG X, LI Y W, SANG S B , et al. Enhanced mechanical properties of SiC reticulated porous ceramics via adjustment of residual stress within the strut[J]. Int J Appl Ceram Tech, 2018, 15(1): 28-35.
[17] LIANG X, LI Y W, SANG S B , et al. Improvement of the mechanical properties of SiC reticulated porous ceramics with optimized three-layered struts for porous media combustion[J]. Ceram Int, 2017, 43(4): 3741-3747.
[20] ZHU X, JIANG D, TAN S, et al. Improvement in the strut thickness of reticulated porous ceramics[J]. J Am Ceram Soc, 2001, 84(7): 1654-1656.
[21] SBAIZERO O, LUCCHINI E. Influence of residual stresses on the mechanical properties of a layered ceramic composite[J]. J Eur Ceram Soc, 1996, 16(8): 813-818.
[22] LAKSHMINARAYANAN R, SHETTY D K, CUTLER R A, Toughening of layered ceramic composites with residual surface compression[J]. J Am Ceram Soc, 1996, 68(1): 1-7.
[23] ARSLAN G, JANSSEN R, CLAUSSEN N. Processing and characterisation of three-layer alumina-based composites with enhanced damage tolerance[J]. J Eur Ceram Soc, 2005, 25(16): 3553-3561.
[24] GUO J, GUO X, ZENG J, et al. Effective strategy for improving infrared emissivity of Zn-Ni porous coating[J]. Appl Surf Sci, 2019, 485: 92-100.
