Research Status of Building Material Application of Copper Tailings and Influencing Rules of Mineral Composition

SHI Linyun; KUANG Jingzhong; LIU Songbai; LU Ya; YAN Jun

[14] GUPTA R C, MEHRA P, THOMAS B S. Utilization of copper tailing in developing sustainable and durable concrete［J］. Journal of Materials in Civil Engineering, 2017, 29(5): 04016274.

[15] KOLOVOS K, LOUTSI P, TSIVILIS S, et al. The effect of foreign ions on the reactivity of the CaO-SiO2-Al2O3-Fe2O3 system: part I. Anions［J］. Cement and Concrete Research, 2001, 31(3): 425-429.

[16] KOLOVOS K, TSIVILIS S, KAKALI G. The effect of foreign ions on the reactivity of the CaO-SiO2-Al2O3-Fe2O3 system: part II. Anions［J］. Cement and Concrete Research, 2002, 32(3): 463-469.

[17] SHEIKH T A, REZA M M. Production of eco-friendly bricks from copper mine tailings through geopolymerization in India［J］. International Journal of Trend in Scientific Research and Development, 2017, 5(1): 435-451.

[18] AHMARI S, ZHANG L Y. Production of eco-friendly bricks from copper mine tailings through geopolymerization［J］. Construction and Building Materials, 2012, 29: 323-331.

[25] MA G W, LI Z J, WANG L. Printable properties of cementitious material containing copper tailings for extrusion based 3D printing［J］. Construction and Building Materials, 2018, 162: 613-627.

[32] HASEGAWA M, OGATA T, SATO M. Mechano-radicals produced from ground quartz and quartz glass［J］. Powder Technology, 1995, 85(3): 269-274.

[34] ONUAGULUCHI O, EREN . Rheology, strength and durability properties of mortars containing copper tailings as a cement replacement material［J］. European Journal of Environmental and Civil Engineering, 2013, 17(1): 19-31.

[35] ONUAGULUCHI O, EREN . Copper tailings as a potential additive in concrete: consistency, strength and toxic metal immobilization properties［J］. Indian Journal of Engineering and Materials Sciences, 2012, 19(2): 79-86.

[38] KUNDU S, AGGARWAL A, MAZUMDAR S, et al. Stabilization characteristics of copper mine tailings through its utilization as a partial substitute for cement in concrete: preliminary investigations［J］. Environmental Earth Sciences, 2016, 75(3): 1-9.

[45] ONUAGULUCHI O, EREN . Recycling of copper tailings as an additive in cement mortars［J］. Construction and Building Materials, 2012, 37: 723-727.

[50] QIU G H, LUO Z Y, SHI Z L, et al. Utilization of coal gangue and copper tailings as clay for cement clinker calcinations［J］. Journal of Wuhan University of Technology (Materials Science Edition), 2011, 26(6): 1205-1210.

[52] JIAN S W, GAO W B, LV Y, et al. Potential utilization of copper tailings in the preparation of low heat cement clinker［J］. Construction and Building Materials, 2020, 252: 119130.

[53] ILER P, KOLOV I, MSILKO J, et al. The effect of zinc on the Portland cement hydration［J］. Key Engineering Materials, 2018, 761: 131-134.

[54] STEPHAN D, MALLMANN R, KNFEL D, et al. High intakes of Cr, Ni, and Zn in clinker: part I. Influence on burning process and formation of phases［J］. Cement and Concrete Research, 1999, 29(12): 1949-1957.

[55] SHANG D C, WANG M G, XIA Z S, et al. Incorporation mechanism of titanium in Portland cement clinker and its effects on hydration properties［J］. Construction and Building Materials, 2017, 146: 344-349.

[56] KINDNESS A, LACHOWSKI E E, MINOCHA A K, et al. Immobilisation and fixation of molybdenum (VI) by Portland cement［J］. Waste Management, 1994, 14(2): 97-102.

[57] MANDALIEV P, DHN R, TITS J, et al. EXAFS study of Nd(III) uptake by amorphous calcium silicate hydrates (C-S-H)［J］. Journal of Colloid and Interface Science, 2010, 342(1): 1-7.

[58] CORUH S, ERGUN O N, CHENG T W. Treatment of copper industry waste and production of sintered glass-ceramic［J］. Waste Management & Research, 2006, 24(3): 234-241.

[61] BARBIERI L, KARAMANOV A, CORRADI A, et al. Structure, chemical durability and crystallization behavior of incinerator-based glassy systems［J］. Journal of Non-Crystalline Solids, 2008, 354(2/3/4/5/6/7/8/9): 521-528.

[64] NIU Y H, FAN X Y, REN D, et al. Effect of Na2CO3 content on thermal properties of foam-glass ceramics prepared from smelting slag［J］. Materials Chemistry and Physics, 2020, 256: 123610.

[66] TIAN X, ZHANG H B, ZHANG T, et al. Alkali-activated copper tailings-based pastes: compressive strength and microstructural characterization［J］. Journal of Materials Research and Technology, 2020, 9(3): 6557-6567.

[69] AYORA C, CHINCHN S, AGUADO A, et al. Weathering of iron sulfides and concrete alteration: thermodynamic model and observation in dams from central Pyrenees, Spain［J］. Cement and Concrete Research, 1998, 28(4): 591-603.

[70] SHI C J, QU B, PROVIS J L. Recent progress in low-carbon binders［J］. Cement and Concrete Research, 2019, 122: 227-250.

[71] NATH P, SARKER P K. Effect of GGBFS on setting, workability and early strength properties of fly ash geopolymer concrete cured in ambient condition［J］. Construction and Building Materials, 2014, 66: 163-171.