Microstructure and Performance of NiTi-Based Intermetallic Compound Coatings by Laser Melting Deposition

Xiaoqin Dai; Quanju Shi; Yu Zhao; Yongbo Xu; Jianbo Lei; Shengfeng Zhou

doi:10.3788/CJL201845.0702008

[1] He G, Eckert J, Dai Q L et al. Nanostructured Ti-based multi-component alloys with potential for biomedical applications[J]. Biomaterials, 24, 5115-5120(2003). http://www.ncbi.nlm.nih.gov/pubmed/14568427

[2] Long M, Rack H J. Titanium alloys in total joint replacement-A materials science perspective[J]. Biomaterials, 19, 1621-1639(1998). http://www.ncbi.nlm.nih.gov/pubmed/9839998

[3] Brewer W D, Keith B R, Wallace T A. Titanium alloys and processing for high speed aircraft[J]. Materials Science & Engineering A, 243, 299-304(1998). http://dl.acm.org/citation.cfm?id=888376

[4] Savalani M M, Ng C C, Li Q H et al. In situ formation of titanium carbide using titanium and carbon-nanotube powders by laser cladding[J]. Applied Surface Science, 258, 3173-3177(2012). http://www.sciencedirect.com/science/article/pii/S0169433211018095

[5] Verdian M M, Raeissi K, Salehi M et al. Characterization and corrosion behavior of NiTi-Ti2Ni-Ni3Ti multiphase intermetallics produced by vacuum sintering[J]. Vacuum, 86, 91-95(2011). http://www.sciencedirect.com/science/article/pii/S0042207X11001643

[6] Li L Q, Wang J D, Wu C C et al. Temperature field of molten pool and microstructure property in laser melting depositions of Ti-6Al-4V[J]. Chinese Journal of Lasers, 44, 0302009(2017).

[7] Mokgalaka M N. Popoola A P I, Pityana S L. In situ laser deposition of NiTi intermetallics for corrosion improvement of Ti-6Al-4V alloy[J]. Transactions of Nonferrous Metals Society of China, 25, 3315-3322(2015).

[8] Hu L F, Li J, Tao Y F et al. Corrosion behaviors of TiNi/Ti2Ni matrix coatings in the environment rich in Cl ions[J]. Surface & Coatings Technology, 311, 295-306(2017). http://www.sciencedirect.com/science/article/pii/S0257897217300208

[9] Gao F, Wang H M. Effect of TiNi in dry sliding wear of laser melt deposited Ti2Ni/TiNi alloys[J]. Materials Characterization, 59, 1349-1354(2008). http://www.sciencedirect.com/science/article/pii/S1044580308001770

[10] Jin J, Wang H. Wear resistance of Ni-Ti alloy[J]. Acta Metallurgica Sinica, 24, 66-70(1988). http://kns.cnki.net/KCMS/detail/detail.aspx?filename=jsxy198800013&dbname=CJFD&dbcode=CJFQ

[11] Zhou S F, Zeng X Y. Growth characteristics and mechanism of carbides precipitated in WC-Fe composite coatings by laser induction hybrid rapid cladding[J]. Journal of Alloys & Compounds, 505, 685-691(2010). http://www.sciencedirect.com/science/article/pii/S0925838810015689

[12] Zhou S F, Xiong Z, Dai X Q et al. Microstructure and oxidation resistance of cryomilled NiCrAlY coating by laser induction hybrid rapid cladding[J]. Surface & Coatings Technology, 258, 943-949(2014). http://www.sciencedirect.com/science/article/pii/S0257897214006537

[13] Zhou S F, Dai X Q, Xiong Z et al. Functionally graded YSZ/NiCrAlY coating prepared by laser induction hybrid rapid cladding[J]. Chinese Journal of Lasers, 40, 0403004(2013).

[14] Zhou S F, Zeng X Y. Microstructure characteristics of Fe-based WC composite coatings prepared by laser induction hybrid rapid cladding[J]. Chinese Journal of Lasers, 37, 1143-1146(2010).

[15] Carvalho P A, Vilar R. Laser alloying of zinc with aluminum: Solidification structures[J]. Surface & Coatings Technology, 91, 158-166(1997). http://www.ingentaconnect.com/content/els/02578972/1997/00000091/00000003/art03185

[16] Okamoto H, Schlesinger M E, Mueller E M. Metals handbook, alloy phase diagram[M]. Geauga: ASM International(1994).

[17] Liu F, Mao Y, Lin X et al. Microstructure and high temperature oxidation resistance of Ti-Ni gradient coating on TA2 titanium alloy fabricated by laser cladding[J]. Optics & Laser Technology, 83, 140-147(2016). http://adsabs.harvard.edu/abs/2016OptLT..83..140L

[18] Bai Y, Gai X, Li S et al. Improved corrosion behaviour of electron beam melted Ti-6Al-4V alloy in phosphate buffered saline[J]. Corrosion Science, 123, 289-296(2017). http://www.sciencedirect.com/science/article/pii/S0010938X16311118

[19] Zaveri N, Mahapatra M, Deceuster A et al. Corrosion resistance of pulsed laser-treated Ti-6Al-4V implant in simulated biofluids[J]. Electrochimica Acta, 53, 5022-5032(2008). http://www.sciencedirect.com/science/article/pii/S001346860800159X

[20] Handzlik P, Fitzner K. Corrosion resistance of Ti and Ti-Pd alloy in phosphate buffered saline solutions with and without H2O2 addition[J]. Transactions of Nonferrous Metals Society of China, 23, 866-875(2013). http://www.sciencedirect.com/science/article/pii/S1003632613625418

[21] Qin F X, Zhang H F, Chen P et al. Corrosion behavior of bulk amorphous Zr55Al10Cu30 Ni5-xPdx alloys[J]. Materials Letters, 58, 1246-1250(2004).

[22] Guilemany J M, Cinca N, Dosta S et al. Corrosion behaviour of thermal sprayed nitinol coatings[J]. Corrosion Science, 51, 171-180(2009). http://www.sciencedirect.com/science/article/pii/S0010938X08004630

[23] Rahna N B, Kalarivalappil V, Nageri M et al. Stability studies of PbS sensitised TiO2, nanotube arrays for visible light photocatalytic applications by X-ray photoelectron spectroscopy (XPS)[J]. Materials Science in Semiconductor Processing, 42, 303-310(2016). http://www.sciencedirect.com/science/article/pii/S136980011530233X

[24] Verdian M M, Raeissi K, Salehi M. Corrosion performance of HVOF and APS thermally sprayed NiTi intermetallic coatings in 3.5% NaCl solution[J]. Corrosion Science, 52, 1052-1059(2010).