[1] 李文龙, 谢核, 尹周平. 机器人加工几何误差建模研究： Ⅰ空间运动链与误差传递. 机械工程学报, 57, 154-168(2021).
W L LI, H XIE, Z P YIN et al. The research of geometric error modeling of robotic machining： Ⅰ spatial motion chain and error transmission. Journal of Mechanical Engineering, 57, 154-168(2021).
[2] R Y TSAI, R K LENZ. A new technique for fully autonomous and efficient 3D robotics hand/eye calibration. IEEE Transactions on Robotics and Automation, 5, 345-358(1989).
[3] N ANDREFF, R HORAUD, B ESPIAU. On-line Hand-Eye calibration, 430-436(2002).
[4] Z Q HUANG, Y SU, Q W WANG et al. Research on extrinsic parameter calibration method of 2D laser rangefinder （LRF）and visible light camera. Chinese Journal of Scientific Instrument, 41, 121-129(2020).
黄志清, 苏毅, 王庆文. 二维激光雷达与可见光相机外参标定方法研究. 仪器仪表学报, 41, 121-129(2020).
[5] 彭梦, 陈白帆, 邓作杰. 2D激光雷达和摄像机最小解标定的多解筛选及参数优化. 仪器仪表学报, 42, 89-97(2021).
M PENG, B F CHEN, Z J DENG et al. Multi solution selection and parameter optimization for minimum solution calibration of 2D laser radar and camera. Chinese Journal of Scientific Instrument, 42, 89-97(2021).
[6] Y J REN, S B YIN, J G ZHU. Calibration technology in application of robot-laser scanning system. Optical Engineering, 51, 114204(2012).
[7] S B YIN, Y GUO, Y J REN et al. A novel TCF calibration method for robotic visual measurement system. Optik, 125, 6920-6925(2014).
[8] H XIE, C T PANG, W L LI et al. Hand-Eye Calibration and Its Accuracy Analysis in Robotic Grinding, 862-867(2015).
[9] X H XU, D H ZHU, H Y ZHANG et al. TCP-based calibration in robot-assisted belt grinding of aero-engine blades using scanner measurements. The International Journal of Advanced Manufacturing Technology, 90, 635-647(2017).
[10] X L JING, Y HU, W Z GUO. High-accuracy calibration of hand-eye matrix of line-structured laser sensor： multiple coordinates transformation. Journal of Shanghai Jiao Tong University, 54, 607-614(2020).
经小龙, 胡源, 郭为忠. 臂载线结构激光手眼矩阵的精确标定： 多坐标系转换法. 上海交通大学学报, 54, 607-614(2020).
[11] W Y CHEN, J DU, W XIONG et al. A noise-tolerant algorithm for robot-sensor calibration using a planar disk of arbitrary 3-D orientation. IEEE Transactions on Automation Science and Engineering, 15, 251-263(2018).
[12] F B CARLSON, R JOHANSSON, A ROBERTSSON. Six DOF Eye-To-hand calibration from 2d measurements using planar constraints, 3628-3632(2015).
[13] S SHARIFZADEH, I BIRO, P KINNELL. Robust hand-eye calibration of 2D laser sensors using a single-plane calibration artefact. Robotics and Computer-Integrated Manufacturing, 61, 101823(2020).
[14] J F GAO, D T LIANG, Y K CHEN. A hand-eye calibration method of line laser profile scanning robot based on standard cylinder. Robot, 44, 321-332(2022).
高金锋, 梁冬泰, 陈叶凯. 基于标准圆柱的线激光轮廓扫描机器人手眼标定方法. 机器人, 44, 321-332(2022).
[15] J XU, J L HOO, S DRITSAS et al. Hand-eye calibration for 2D laser profile scanners using straight edges of common objects. Robotics and Computer-Integrated Manufacturing, 73, 102221(2022).
[16] M Y LI, Z J DU, X X MA et al. A robot hand-eye calibration method of line laser sensor based on 3D reconstruction. Robotics and Computer-Integrated Manufacturing, 71, 102136(2021).
[17] X S GAO, X R HOU, J L TANG et al. Complete solution classification for the perspective-three-point problem. IEEE Transactions on Pattern Analysis and Machine Intelligence, 25, 930-943(2003).
