[1] KOHIN M, WEIN S J,TRAYLOR J D, et al.. Analysis and design of transparent conductive coatings and filters ［J］.Opt. Eng., 1993,32(5):911-925.

[2] LU Z G, TAN J B, JIN P,et al.. Equivalent refractive index model on shielding effectiveness analysis of high transparency metallic mesh ［J］. Opt. Precision Eng., 2006,14(6):949-954. (in Chinese)

[3] JIA H Y, FENG X G, GAO J S. Influence on polarization independence of frequency selective surface by altering Y slot element arrangement ［J］. Opt. Precision Eng., 2007,15(6):978-982. (in Chinese)

[4] WU X Z, LI H. Research and development of surface conductive shielding materials［J］. Electronic Material & Electronic Technology, 2008,(2):23-27. (in Chinese)

[5] MIAS C,TSOKONAS C, OSWALD C. An investigation into the feasibility of designing frequency selective windows employing periodic structures ［R］. Technical Reports AY3922, The Nottingham Trent University, Burton Street, Nottingham, NG1 4BU, U.K., 2002.

[6] FENG X G, FANG L, SUN L C. Characteristic dimension design and fabrication of metallic mesh ［J］. Opt. Precision Eng., 2005,13(1):59-64. (in Chinese)

[7] LIAO X P,XIA H J. Analysis of the technology of electroless nickel plating and its application in industries［J］. Chongqing Technol. Business Univ.(Nat. Sci. Ed.), 2009,26(4):399-402. (in Chinese)

[8] JIANG X X, SHEN W. The Fundamentals and Practice of Electroless Plating［M］. Beijing:National Defence Industry Press, 2000. (in Chinese)

[9] LI K Y. Physical Chemistry of interface and colloid ［M］. Haerbin: Publishing house of Haerbin Industry university, 1998. (in Chinese)

[10] CHEONG W J, LUAN B L, SHOESMITH D. The effects of stabilizers on the bath stability of electronless Ni deposition and the deposit［J］. Applied Surface Science, 2004,229(1-4):282-300.

[11] YANG L, ZHANG Y M. Electroless Fe-Ni plating on inorganic powder ［J］. New Technology & New Process,1997(1):37-39.(in Chinese)

[12] WHITBOURN L B, COMPTON R C. Equivalent-circuit formulas for metal grid reflectors at a dielectric boundry ［J］. Appl. Opt., 1985,24(2):217-220.