• Optics and Precision Engineering
  • Vol. 22, Issue 8, 2014 (2014)
MENG Wen*, HAN Xiao-fei, LI Yun-xia, and LI Da
Author Affiliations
  • [in Chinese]
  • show less
    DOI: 10.3788/ope.20142208.2014 Cite this Article
    MENG Wen, HAN Xiao-fei, LI Yun-xia, LI Da. Thermal ablation law of nylon materials under laser irradiation[J]. Optics and Precision Engineering, 2014, 22(8): 2014 Copy Citation Text show less
    References

    [1] LACHAUD J, ASPA Y, GERARD L. Analytical modeling of the steady state ablation of a 3D C/C composite[J]. International Journal of Heat and Mass Transfer, 2008, 51:2614-2627.

    [2] WAN H, HU K W, MU J Y, et al.. Damage analysis of fiber reinforced resin matrix composites irradiated by CW laser [J]. High Power Laser and Particle Beams, 2008, 20(1):6-10. (in Chinese)

    [3] CHEN M S, JIANG H M, LIU Z J. Three-dimensional temperature field model of thermally decomposing resin composite irradiated by laser[J]. High Power Laser and Particle Beams, 2011, 23(3): 642-646. (in Chinese)

    [4] CHANG X L, LI ZH L, HU B, et al.. Analysis of carbon/epoxy laminates ablation subject to laser irradiation[J]. Infrared and Laser Engineering, 2011, 40(9):1691-1695. (in Chinese)

    [5] CHEN B, WAN H, MU J Y, et al.. Ablation mechanism of carbon fiber/epoxy composite irradiated by repetition frequency laser [J].High Power Laser and Particle Beams, 2008, 20(4):547-551. (in Chinese)

    [6] HUANG Y G, LIU SH B, LONG L CH, et al.. Observation on the process of continuous wave Nd∶YAG laser ablation on carbon fiber composite material [J]. Chinese Journal of Laser, 2008, 35(12):2042-2046. (in Chinese)

    [7] GUO Y L, LIANG G ZH, QIU ZH M, et al.. Effect of laser parameters on mass ablative rate of carbon fiber reinforced composite[J]. Acta Materiae Compositae Sinica, 2006, 23(5):84-88. (in Chinese)

    [8] CHEN M S, JIANG H M. Influence of tangential airflows on process of laser ablating carbon-fiber composites [J]. Opt. Precision Eng., 2011,19(2): 482-486. (in Chinese)

    [9] LIU F, PENG G L, DU T J, et al.. Influence of tangential airflows on burn-through effect with no-melting of metral heated by laser[J]. Chinese Optics, 2013, 6(3):332-342.(in Chinese)

    [10] XIAO J, HE H X, XIA H J, et al.. Temperature flied simulation on aluminum alloy irradiated by long pulsed laser and continuous wave laser[J]. Chinese Journal of Laser, 2012, 39(11): 1103002-1-6. (in Chinese)

    [11] LI D W. Study on High Power Laser Damage about Low Slow Small Target[D]. Xi’an:Air Force Engineering University,2012. (in Chinese)

    CLP Journals

    [1] MENG Wen, ZHANG Wen-jie, LI Yun-xia, FANG Ying-wu, HAN Xiao-fei. Thermal ablation law of laser irradiation on nylon materials under tangential airflow[J]. Optics and Precision Engineering, 2017, 25(2): 351

    [2] Xihui WANG, Xiaozheng LIU, Haitao ZHANG, Yuxin KOU, Kuo MENG. Radiation damage characteristics of stainless steel by 1 μm high power continuous laser[J]. Optics and Precision Engineering, 2025, 33(6): 874

    [3] Xihui WANG, Xiaozheng LIU, Haitao ZHANG, Yuxin KOU, Kuo MENG. Radiation damage characteristics of stainless steel by 1 μm high power continuous laser[J]. Optics and Precision Engineering, 2025, 33(6): 874

    MENG Wen, HAN Xiao-fei, LI Yun-xia, LI Da. Thermal ablation law of nylon materials under laser irradiation[J]. Optics and Precision Engineering, 2014, 22(8): 2014
    Download Citation