[1] KAZMIERKOWSKI M P. Electric motor drives: Modeling, analysis and control, R. Krishan, Prentice-Hall, Upper Saddle River, NJ, 2001, xxviii + 626 pp. ISBN 0-13-0910147 ［J］. International Journal of Robust & Nonlinear Control, 2004, 14(8): 767-769.

[2] TANG R Y. Theory and Design of Modern Permanent Magnet Motor ［M］. Beijing: Mechanical Industry Press, 2016: 1-10. (in Chinese)

[3] LI X T, ZHANG X P, MAO D P, et al.. Adaptive robust control over high-performance VCM-FSM ［J］. Opt. Precision Eng., 2017, 25(9): 2428-2436.(in Chinese)

[4] GEMES J A, IRAOLAGOITIA A A, DEL HOYO J J, et al..Torque analysis in permanent-magnet synchronous motors: a comparative study ［J］. IEEE Transactions on Energy Conversion, 2011, 26(1): 55-63.

[5] GEBREGERGIS A, CHOWDHURY M, ISLAM M, et al.. Modeling of permanent magnet synchronous machine including torque ripple effects ［J］. IEEE Transactions on Industry Applications, 2015, 51(1): 232-239.

[6] NORIYA NAKAO, KAN AKATSU. Suppressing pulsating torques: torque ripple control for synchronous motors ［J］. IEEE Industry Applications Magazine, 2014, 20(6): 33-44.

[7] LAM B H, PANDA S K, XU J X, et al.. Torque ripple minimization in PM synchronous motors an iterative learning control approach ［C］.IEEE International Conference on Power Electronics & Drive Systems. IEEE, 1999:1458-1463.

[8] YUN J P, LEE C W, CHOI S H, et al.. Torque ripples minimization in PMSM using variable step-size normalized iterative learning control ［C］. Robotics, Automation and Mechatronics, 2006 IEEE Conference on. IEEE, 2007:1-6.

[9] LIU J, LI H W, DENG Y T. Torque ripple minimization of PMSM based on robust iterative learning control ［J］.Opt. Precision Eng., 2017, 25(10): 2645-2660. (in Chinese)

[10] CHO K R, SEOK J K. Correction on current measurement errors for accurate flux estimation of ac drives at low stator frequency ［J］. IEEE Transactions on Industry Applications, 2008, 44(2): 594-603.

[11] QIAO M, LIU P K. Simulation of SVPWM and dead-time compensation based on PMSM ［J］.Mechatronics, 2018(2): 48-53. (in Chinese)

[12] MA Y H, MAO X Y. An SVPWM dead-time compensation based on current correction algorithms ［J］. Electrical Energy Management Technology, 555(18): 22-27,40. (in Chinese)

[13] LI S, ZHOU M, YU X. Design and implementation of terminal sliding mode control method for PMSM speed regulation system ［J］. IEEE Transactions on Industrial Informatics, 2013, 9(4): 1879-1891.

[14] FNAIECH M A, BETIN F, CAPOLINO G A, et al.. Fuzzy logic and sliding- mode controls applied to six-phase induction machine with open phases［J］. IEEE Trans Ind Electron, 2010, 57(1): 354.

[15] LIU J, LI H W, DENG Y T. PMSM sliding-mode control based on novel reaching law and disturbance observer ［J］. Chinese Journal of Engineering, 2017(6): 126-137. (in Chinese)

[16] KAN W F, CHEN Q, QI ZH A. SPMSM sliding mode current control based on disturbance compensation ［J］. Small & Special Electrical Machines, 2019, 47(2): 52-55,60. (in Chinese)

[17] KRAUSE P, WASYNCZUK O, SUDHOFF S. Analysis of Electric Machinery and Drive Systems ［M］. Wiley-IEEE Press, 2013.

[18] ZHANG X, SUN L, ZHAO K, et al.. Nonlinear speed control for PMSM system using sliding-mode control and disturbance compensation techniques ［J］. IEEE Transactions on Power Electronics, 2013, 28(3): 1358-1365.

[19] UTKIN V, SHI J. Integral sliding mode in systems operating under uncertainty conditions ［C］.IEEE Conference on Decision & Control. IEEE, 1996.

[20] UTKIN V. Sliding mode control in mechanical systems［J］. Proceedings of IECON' 94-20th Annual Conference of IEEE Industrial Electron-ics, 1994(3): 5-9.

[21] HAN J Q. From PID technology to ADRC technology ［J］. Control Engineering of China, 2002, 9(3): 13-18. (in Chinese)

[22] HAN J Q. Extended state observer for a class of uncertain objects ［J］. Control and Decision, 1995(1): 85-88. (in Chinese)