[1] May P B 2000 Diamond thin films: a 21st-century material Phil. Trans. R. Soc. A 358 473–95

[2] Yang N J, Yu S Y, Macpherson J V, Einaga Y, Zhao H Y, Zhao G H, Swain G M and Jiang X 2019 Conductive diamond: synthesis, properties, and electrochemical applications Chem. Soc. Rev. 48 157–204

[3] Hicks M L, Pakpour-Tabrizi A C and Jackman R B 2019 Polishing, preparation and patterning of diamond for device applications Diam. Relat. Mater. 97 107424

[4] Schuelke T and Grotjohn T A 2013 Diamond polishing Diam. Relat. Mater. 32 17–26

[5] Wort C J H and Balmer R S 2008 Diamond as an electronic material Mater. Today 11 22–28

[6] Mochalin V N, Shenderova O, Ho D and Gogotsi Y 2012 The properties and applications of nanodiamonds Nat. Nanotechnol. 7 11–23

[7] Zaitsev A M, Kosaca G, Richarz B, Richarz V, Job R, Fries T and Fahrner W R 1998 Thermochemical polishing of CVD diamond films Diam. Relat. Mater. 7 1108–17

[8] Roy S, Balla V K, Mallik A K, Ralchenko V G, Bolshakov A P, Ashkinazi E E and Dandapat N 2018 A comprehensive study of mechanical and chemo-mechanical polishing of CVD diamond Mater. Today 5 9846–54

[9] Xu H Q, Zang J B, Yang G P, Tian P F, Wang Y H, Yu Y Q, Lu J, Xu X P and Zhang P W 2018 An efficient titanium-containing corundum wheel for grinding CVD diamond films Diam. Relat. Mater. 84 119–26

[10] Xu H Q, Zang J B, Tian P F, Yuan Y G, Wang Y H, Yu Y Q, Lu J, Xu X P and Zhang P W 2018 Surface conversion reaction and high efficient grinding of CVD diamond films by chemically mechanical polishing Ceram. Int. 44 21641–7

[11] Doronin M A, Polyakov S N, Kravchuk K S, Molchanov S P, Lomov A A, Troschiev S Y and Terentiev S A 2018 Limits of single crystal diamond surface mechanical polishing Diam. Relat. Mater. 87 149–55

[12] Jarvis M R, Pérez R, Van Bouwelen F M and Payne M C 1998 Microscopic mechanism for mechanical polishing of diamond (110) surfaces Phys. Rev. Lett. 80 3428–31

[13] Zong W J, Cheng X and Zhang J J 2016 Atomistic origins of material removal rate anisotropy in mechanical polishing of diamond crystal Carbon 99 186–94

[14] Weima J A, Von Borany J, Kreissig U and Fahrner W R 2001 Quantitative analysis of carbon distribution in steel used for thermochemical polishing of diamond films J. Electrochem. Soc. 148 G607

[15] Weima J A, Zaitsev A M, Job R, Kosaca G, Blum F, Grabosch G, Fahrner W R and Knopp J 2000 Investigation of non-diamond carbon phases and optical centers in thermochemically polished polycrystalline CVD diamond films J. Solid State Electrochem. 4 425–34

[16] Bhushan B, Subramaniam V V, Malshe A, Gupta B K and Ruan J 1993 Tribological properties of polished diamond films J. Appl. Phys. 74 4174–80

[17] Chen Y, Zhang L C and Tang F 2012 Surface integrity of PCD composites generated by dynamic friction polishing: effect of processing conditions Diam. Relat. Mater. 26 25–31

[18] Chen W, Iwai M and Suzuki K 2014 Dynamic friction polishing of diamond utilizing high reactive metallic tools Adv. Mater. Res. 1017 160–5

[19] Feng H B 2013 Development of dynamic friction polishing technique for CVD diamond (Australia: University of New South Wales)

[20] Ji G S and Zhang Y K 2003 Laser polishing of chemically vapor-deposited diamond films Laser Technol. 27 106–9

[21] Konov V I 2012 Laser in micro and nanoprocessing of diamond materials Laser Photonics Rev. 6 739–66

[22] Ozkan A M, Malshe A P and Brown W D 1997 Sequential multiple-laser-assisted polishing of free-standing CVD diamond substrates Diam. Relat. Mater. 6 1789–98

[23] Tang F Z, Chen Y Q and Zhang L C 2012 Analysis of polished polycrystalline diamond using dual beam focused ion beam microscopy Phil. Mag. 92 1680–90

[24] Mi S C, Toros A, Graziosi T and Quack N 2019 Non-contact polishing of single crystal diamond by ion beam etching Diam. Relat. Mater. 92 248–52

[25] Frost F, Fechner R, Ziberi B, V?llner J, Flamm D and Schindler A 2009 Large area smoothing of surfaces by ion bombardment: fundamentals and applications J. Phys.: Condens. Matter 21 224026

[26] Tokuda N, Takeuchi D, Ri S G, Umezawa H, Yamabe K, Okushi H and Yamasaki S 2009 Flattening of oxidized diamond (111) surfaces with H2SO4/H2O2 solutions Diam. Relat. Mater. 18 213–5

[27] Kubota A, Fukuyama S, Ichimori Y and Touge M 2012 Surface smoothing of single-crystal diamond (100) substrate by polishing technique Diam. Relat. Mater. 24 59–62

[28] Yamamura K, Emori K, Sun R, Ohkubo Y, Endo K, Yamada H, Chayahara A and Mokuno Y 2018 Damage-free highly efficient polishing of single-crystal diamond wafer by plasma-assisted polishing CIRP Ann. 67 353–6

[29] Watanabe J, Touge M and Sakamoto T 2013 Ultraviolet-irradiated precision polishing of diamond and its related materials Diam. Relat. Mater. 39 14–19

[30] Chen Y Q and Zhang L C 2013 Polishing of Diamond Materials: Mechanisms, Modeling and Implementation (Berlin: Springer) pp 25–30

[31] Tolkowsky M 1920 Research on the Abrading, Grinding or Polishing of Diamonds (London: University of London)

[32] Yoshikawa M and Okuzumi F 1997 Hot-iron-metal polishing machine for CVD diamond films and characteristics of the polished surfaces Surf. Coat. Technol. 88 197–203

[33] Weima J A, Job R, Fahrner W R and Zaitsev A M 2000 Low energy carbonaceous and graphite phases on the surfaces of thermochemically polished chemical vapor deposited diamond films J. Appl. Phys. 87 4553–7

[34] Evans T and Sauter D H 1961 Etching of diamond surfaces with gases Phil. Mag. 6 429–40

[35] Sandhu G S and Chu W K 1989 Reactive ion etching of diamond Appl. Phys. Lett. 55 437–8

[36] Vivensang C, Ferlazzo-Manin L, Ravet M F, Turban G, Rousseaux F and Gicquel A 1996 Surface smoothing of diamond membranes by reactive ion etching process Diam. Relat. Mater. 5 840–4

[37] Shpilman Z, Gouzman I, Grossman E, Shen L H, Minton T K, Paci J T, Schatz G C, Akhvlediani R and Hoffman A 2010 Oxidation and etching of CVD diamond by thermal and hyperthermal atomic oxygen J. Phys. Chem. C 114 18996–9003

[38] Naamoun M, Tallaire A, Silva F, Achard J, Doppelt P and Gicquel A 2012 Etch-pit formation mechanism induced on HPHT and CVD diamond single crystals by H2/O2 plasma etching treatment: part of topical section on fundamentals and applications of diamond Phys. Status Solidi a 209 1715–20

[39] Tsubouchi N, Mokuno Y and Shikata S 2016 Characterizations of etch pits formed on single crystal diamond surface using oxygen/hydrogen plasma surface treatment Diam. Relat. Mater. 63 43–46

[40] Spencer E G and Schmidt P H 1972 Ion machining of diamond J. Appl. Phys. 43 2956–8

[41] Malshe A P, Park B S, Brown W D and Naseem H A 1999 A review of techniques for polishing and planarizing chemically vapor-deposited (CVD) diamond films and substrates Diam. Relat. Mater. 8 1198–213

[42] Malshe A P, Naseem H A and Brown W D 1998 Apparatus for and method of polishing and planarizing polycrystalline diamonds, and polished and planarized polycrystalline diamonds and products made therefrom U. S. Patent. No. 5725413

[43] Kühnle J and Weis O 1995 Mechanochemical superpolishing of diamond using NaNO3 or KNO3 as oxidizing agents Surf. Sci. 340 16–22

[44] B?gli U, Blatter A, Pimenov S M, Smolin A A and Konov V I 1992 Smoothening of diamond films with an ArF laser Diam. Relat. Mater. 1 782–8

[45] Wang L X, Chen X K, Wu G, Cao S Z, Xiong Y Q, Wang J X and Zhao D C 2017 Study on site-specific polishing of polycrystalline diamond film by KrF excimer laser J. Laser Micro/Nanoeng. 12 62–66

[46] Suzuki K, Iwai M, Uematsu T and Yasunaga N 2003 Material removal mechanism in dynamic friction polishing of diamond Key Eng. Mater. 238–239 235–40

[47] Chen Y, Zhang L C and Arsecularatne J A 2007 Polishing of polycrystalline diamond by the technique of dynamic friction. Part 2: material removal mechanism Int. J. Mach. Tools Manuf. 47 1615–24

[48] Chen Y, Zhang L C, Arsecularatne J A and Zarudi I 2007 Polishing of polycrystalline diamond by the technique of dynamic friction, part 3: mechanism exploration through debris analysis Int. J. Mach. Tools Manuf. 47 2282–9

[49] Chen Y and Zhang L C 2009 Polishing of polycrystalline diamond by the technique of dynamic friction, part 4: establishing the polishing map Int. J. Mach. Tools Manuf. 49 309–14

[50] Chen Y, Zhang L C, Arsecularatne J A and Montross C 2006 Polishing of polycrystalline diamond by the technique of dynamic friction, part 1: prediction of the interface temperature rise Int. J. Mach. Tools Manuf. 46 580–7

[51] Chen Y, Nguyen T and Zhang L C 2009 Polishing of polycrystalline diamond by the technique of dynamic friction—part 5: quantitative analysis of material removal Int. J. Mach. Tools Manuf. 49 515–20

[52] Chen Y Q and Zhang L C 2010 Fast polishing of single crystal diamond Adv. Mater. Res. 97–101 4096–9

[53] Tang F Z, Chen Y Q and Zhang L C 2014 On the generation of surface depressions in polishing polycrystalline diamond compacts J. Phys. D: Appl. Phys. 47 125301

[54] Kubota A, Nagae S, Motoyama S and Touge M 2015 Two-step polishing technique for single crystal diamond (100) substrate utilizing a chemical reaction with iron plate Diam. Relat. Mater. 60 75–80

[55] Kubota A, Motoyama S and Touge M 2016 Development of an ultra-finishing technique for single-crystal diamond substrate utilizing an iron tool in H2O2 solution Diam. Relat. Mater. 64 177–83

[56] Inui T, Otowa T, Tsutchihashi K and Takegami Y 1982 Complete oxidation of active carbon at low temperatures by composite catalysts Carbon 20 213–7

[57] Mul G, Kapteijn F, Doornkamp C and Moulijn J A 1998 Transition metal oxide catalyzed carbon black oxidation: a study with 18O2 J. Catal. 179 258–66

[58] Luo X W, Jean-Charles R and Yu S Y 2004 Effect of temperature on graphite oxidation behavior Nucl. Eng. Des. 227 273–80

[59] Ma Z B, Wu J, Shen W L, Yan L, Pan X and Wang J H 2014 Etching of CVD diamond films using oxygen ions in ECR plasma Appl. Surf. Sci. 289 533–7

[60] Chen Y Q 2007 Polishing of polycrystalline diamond composites (Australia: University of Sydney)

[61] Gaissmaier K and Weis O 1993 Superpolishing of diamond Diam. Relat. Mater. 2 943–8

[62] Hird J R and Field J E 2004 Diamond polishing Proc. R. Soc. A 460 3547–68

[63] Grillo S E and Field J E 1997 The polishing of diamond J. Phys. D: Appl. Phys. 30 202–9

[64] Van Bouwelen F M, Field J E and Brown L M 2003 Electron microscopy analysis of debris produced during diamond polishing Phil. Mag. 83 839–55

[65] Wilks E M and Wilks J 1959 The resistance of diamond to abrasion Phil. Mag. 4 158–70

[66] Wilks J 1973 Experiments on polishing of diamond Nature 243 15–18

[67] Kubota A, Nagae S and Motoyama S 2020 High-precision mechanical polishing method for diamond substrate using micron-sized diamond abrasive grains Diam. Relat. Mater. 101 107644

[68] Yuan Z J, Yao Y X, Zhou M and Bai Q S 2003 Lapping of single crystal diamond tools CIRP Ann. 52 285–8

[69] Tang C J, Neves A J, Fernandes A J, Gracio J and Ali N 2003 A new elegant technique for polishing CVD diamond films Diam. Relat. Mater. 12 1411–6

[70] Ralchenko V G, Ashkinazi E E, Zavedeev E V, Khomich A A, Bolshakov A P, Ryzhkov S G, Sovyk D N, Shershulin V A, Yurov V Y and Rudnev V V 2016 High-rate ultrasonic polishing of polycrystalline diamond films Diam. Relat. Mater. 66 171–6

[71] Seal M 1958 The abrasion of diamond Proc. R. Soc. A 248 379–93

[72] Hitchiner M P, Wilks E M and Wilks J 1984 The polishing of diamond and diamond composite materials Wear 94 103–20

[73] Zheng X F, Ma Z B, Wu Z H, He A H, Wang J H and Yuan S L 2008 Plasma-etching enhanced mechanical polishing for CVD diamond films Plasma Sci. Technol. 10 336–9

[74] Grillo S E, Field J E and van Bouwelen F M 2000 Diamond polishing: the dependency of friction and wear on load and crystal orientation J. Phys. D: Appl. Phys. 33 985–90

[75] Zong W J, Li D, Cheng K, Sun T, Wang H X and Liang Y C 2005 The material removal mechanism in mechanical lapping of diamond cutting tools Int. J. Mach. Tools Manuf. 45 783–8

[76] Zong W J, Li Z Q, Sun T, Li D and Cheng K 2010 Analysis for the wear resistance anisotropy of diamond cutting tools in theory and experiment J. Mater. Process. Technol. 210 858–67

[77] Zong W J, Cheng K, Li D, Sun T and Liang Y C 2007 The ultimate sharpness of single-crystal diamond cutting tools–part I: theoretical analyses and predictions Int. J. Mach. Tools Manuf. 47 852–63

[78] Blank V, Popov M, Pivovarov G, Lvova N and Terentev S 1999 Mechanical properties of different types of diamond Diam. Relat. Mater. 8 1531–5

[79] Brookes E J, Greenwood P and Xing G 1999 The plastic deformation and strain-induced fracture of natural and synthetic diamond Diam. Relat. Mater. 8 1536–9

[80] Field J E and Pickles C S J 1996 Strength, fracture and friction properties of diamond Diam. Relat. Mater. 5 625–34

[81] Telling R H, Pickard C J, Payne M C and Field J E 2000 Theoretical strength and cleavage of diamond Phys. Rev. Lett. 84 5160–3

[82] Yang N, Zong W J, Li Z Q and Sun T 2015 The dependency of diamond lapping surface morphology on crystal orientation Int. J. Adv. Manuf. Technol. 77 1029–34

[83] Harrison J A, White C T, Colton R J and Brenner D W 1992 Nanoscale investigation of indentation, adhesion and fracture of diamond (111) surfaces Surf. Sci. 271 57–67

[84] Pastewka L, Moser S, Gumbsch P and Moseler M 2011 Anisotropic mechanical amorphization drives wear in diamond Nat. Mater. 10 34–38

[85] Gao G T, Cannara R J, Carpick R W and Harrison J A 2007 Atomic-scale friction on diamond: a comparison of different sliding directions on (001) and (111) surfaces using MD and AFM Langmuir 23 5394–405

[86] Perry M D and Harrison J A 1997 Friction between diamond surfaces in the presence of small third-body molecules J. Phys. Chem. 101 1364–73

[87] Zhang S J, To S and Zhang G Q 2017 Diamond tool wear in ultra-precision machining Int. J. Adv. Manuf. Technol. 88 613–41

[88] Van Bouwelen F M, Bleloch A L, Field J E and Brown L M 1996 Wear by friction between diamonds studied by electron microscopical techniques Diam. Relat. Mater. 5 654–7

[89] Fairchild B A, Rubanov S, Lau D W M, Robinson M, Suarez-Martinez I, Marks N, Greentree A D, McCulloch D and Prawer S 2012 Mechanism for the amorphisation of diamond Adv. Mater. 24 2024–9

[90] Wang C Y, Zhang F L, Kuang T C and Chen C L 2006 Chemical/mechanical polishing of diamond films assisted by molten mixture of LiNO3 and KNO3 Thin Solid Films 496 698–702

[91] Ollison C D, Brown W D, Malshe A P, Naseem H A and Ang S S 1999 A comparison of mechanical lapping versus chemical-assisted mechanical polishing and planarization of chemical vapor deposited (CVD) diamond Diam. Relat. Mater. 8 1083–90

[92] Yuan Z W, Jin Z J, Zhang Y J and Wen Q 2013 Chemical mechanical polishing slurries for chemically vapor-deposited diamond films J. Manuf. Sci. Eng. 135 041006

[93] Cheng C Y, Tsai H Y, Wu C H, Liu P Y, Hsieh C H and Chang Y Y 2005 An oxidation enhanced mechanical polishing technique for CVD diamond films Diam. Relat. Mater. 14 622–5

[94] Huang S T, Zhou L, Xu L F and Jiao K R 2010 A super-high speed polishing technique for CVD diamond films Diam. Relat. Mater. 19 1316–23

[95] Din S H, Shah M A and Sheikh N A 2016 Tribology in industry effect of CVD-diamond on the tribological and mechanical performance of titanium alloy (Ti6Al4V) Tribol. Ind. 530 530–42

[96] Xu H Q et al 2017 High-efficiency grinding CVD diamond films by Fe-Ce containing corundum grinding wheels Diam. Relat. Mater. 80 5–13

[97] Xu H Q, Zang J B, Tian P F, Wang Y H, Yu Y Q, Lu J, Xu X P and Zhang P W 2018 Rapid grinding CVD diamond films using corundum grinding wheels containing iron Int. J. Refract. Met. Hard Mater. 71 147–52

[98] Hsieh C H, Tsai H Y, Lai H T and Lin H Y 2002 Comparison between mechanical method and chemical-assisted mechanical method for CVD diamond film polishing Proc. SPIE 4936

[99] Tsai H Y, Ting C J and Chou C P 2007 Evaluation research of polishing methods for large area diamond films produced by chemical vapor deposition Diam. Relat. Mater. 16 253–61

[100] Thomas E L H, Nelson G W, Mandal S, Foord J S and Williams O A 2014 Chemical mechanical polishing of thin film diamond Carbon 68 473–9

[101] Thomas E L H, Mandal S, Brousseau E B and Williams O A 2014 Silica based polishing of {100} and {111} single crystal diamond Sci. Technol. Adv. Mater. 15 035013

[102] Werrell J M, Mandal S, Thomas E L H, Brousseau E B, Lewis R, Borri P, Davies P R and Williams O A 2017 Effect of slurry composition on the chemical mechanical polishing of thin diamond films Sci. Technol. Adv. Mater. 18 654–63

[103] Mandal S, Thomas E L H, Gines L, Morgan D, Green J, Brousseau E B and Williams O A 2018 Redox agent enhanced chemical mechanical polishing of thin film diamond Carbon 130 25–30

[104] Cui Z P, Li G and Zong W J 2019 A polishing method for single crystal diamond (100) plane based on nano silica and nano nickel powder Diam. Relat. Mater. 95 141–53

[105] Yuan Z W, Zheng P, Wen Q and He Y 2018 Chemical kinetics mechanism for chemical mechanical polishing diamond and its related hard-inert materials Int. J. Adv. Manuf. Technol. 95 1715–27

[106] Cheng H H and Chen C C 2006 Chemical-assisted mechanical polishing of diamond film on wafer Mater. Sci. Forum 505–507 1225–30

[107] Filik J, May P W, Pearce S R J, Wild R K and Hallam K R 2003 XPS and laser Raman analysis of hydrogenated amorphous carbon films Diam. Relat. Mater. 12 974–8

[108] Dwivedi N, Yeo R J, Zhang Z, Dhand C, Tripathy S and Bhatia C S 2016 Interface engineering and controlling the friction and wear of ultrathin carbon films: high sp3 versus high sp2 carbons Adv. Funct. Mater. 26 1526–42

[109] Charrier G, Lévy S and Vigneron J 2011 Electroless oxidation of boron-doped diamond surfaces: comparison between four oxidizing agents; Ce4+, MnO4 ?, H2O2 and S2O8 2? Diam. Relat. Mater. 20 944–50

[110] Kubota A, Nagae S and Touge M 2016 Improvement of material removal rate of single-crystal diamond by polishing using H2O2 solution Diam. Relat. Mater. 70 39–45

[111] Guo X G, Yuan S, Wang X L, Jin Z J and Kang R K 2019 Atomistic mechanisms of chemical mechanical polishing of diamond (100) in aqueous H2O2/pure H2O: molecular dynamics simulations using reactive force field (ReaxFF) Comput. Mater. Sci. 157 99–106

[112] Yuan S, Guo X G, Lu M G, Jin Z J, Kang R K and Guo D M 2019 Diamond nanoscale surface processing and tribochemical wear mechanism Diam. Relat. Mater. 94 8–13

[113] Shi Z Y, Jin Z J, Guo X G, Yuan S and Guo J 2019 Insights into the atomistic behavior in diamond chemical mechanical polishing with·OH environment using ReaxFF molecular dynamics simulation Comput. Mater. Sci. 166 136–42

[114] Shi Z Y, Jin Z J, Guo X G, Shi X L and Guo J 2019 Interfacial friction properties in diamond polishing process and its molecular dynamic analysis Diam. Relat. Mater. 100 107546

[115] Kubota A and Takita T 2018 Novel planarization method of single-crystal diamond using 172 nm vacuum-ultraviolet light Precis. Eng. 54 269–75

[116] Yamamura K, Takiguchi T, Ueda M, Deng H, Hattori A N and Zettsu N 2011 Plasma assisted polishing of single crystal SiC for obtaining atomically flat strain-free surface CIRP Ann. 60 571–4

[117] Deng H, Endo K and Yamamura K 2017 Damage-free finishing of CVD-SiC by a combination of dry plasma etching and plasma-assisted polishing Int. J. Mach. Tools Manuf. 115 38–46

[118] Deng H, Endo K and Yamamura K 2015 Plasma-assisted polishing of gallium nitride to obtain a pit-free and atomically flat surface CIRP Ann. 64 531–4

[119] Deng H and Yamamura K 2013 Atomic-scale flattening mechanism of 4H-SiC (0001) in plasma assisted polishing CIRP Ann. 62 575–8

[120] Liu N, Sugawara K, Yoshitaka N, Yamada H, Takeuchi D, Akabane Y, Fujino K, Kawai K, Arima K and Yamamura K 2020 Damage-free highly efficient plasma-assisted polishing of a 20-mm square large mosaic single crystal diamond substrate Sci. Rep. 10 19432

[121] Sugino G, Suzuki K, Iwai M and Ninomiya S 2010 A study on dynamic friction polishing method utilizing resistance heating for electrically conductive diamond Proc. Euspen Int. Conf. (Delft: Euspen) pp 371–4

[122] Yuan Z W, Jin Z J, Kang R K and Wen Q 2012 Tribochemical polishing CVD diamond film with FeNiCr alloy polishing plate prepared by MA-HPS technique Diam. Relat. Mater. 21 50–57

[123] Shi S J, Jin Z J, Zhong X H, Lin J Z and Yin B 2015 Processing and mechanism of dynamic friction polishing diamond using manganese-based alloy Mater. Manuf. Process. 30 654–60

[124] Zheng Y T et al 2020 Subsurface cleavage of diamond after high-speed three-dimensional dynamic friction polishing Diam. Relat. Mater. 101 107600

[125] Gogotsi Y G, Kailer A and Nickel K G 1998 Pressure-induced phase transformations in diamond J. Appl. Phys. 84 1299–304

[126] Miyamoto I and Taniguchi N 1982 Polishing and sharpening of diamond point tools by ion sputter-machining Precis. Eng. 4 191–4

[127] Hoffman A, Paterson P J K and Prawer S 1990 Comparison of the effect of argon and hydrogen ion bombardment on the diamond (100) surface as studied by AES and EELS Nucl. Instrum. Methods Phys. Res. B 52 63–67

[128] Zhao T J, Grogan D F, Bovard B G and Macleod H A 1990 Diamond film polishing with argon and oxygen ion beams Proc. SPIE 1325 142–51

[129] Ando Y, Nishibayashi Y, Kobashi K, Hirao T and Oura K 2002 Smooth and high-rate reactive ion etching of diamond Diam. Relat. Mater. 11 824–7

[130] Lee C L, Gu E, Dawson M D, Friel I and Scarsbrook G A 2008 Etching and micro-optics fabrication in diamond using chlorine-based inductively-coupled plasma Diam. Relat. Mater. 17 1292–6

[131] Tsubouchi N and Mokuno Y 2016 Configuration of a single grown-in dislocation corresponding to one etch pit formed on the surface of CVD homoepitaxial diamond J. Cryst. Growth 455 71–75

[132] Koslowski B, Strobel S and Ziemann P 2000 Ion polishing of a diamond (100) surface artificially roughened on the nanoscale Diam. Relat. Mater. 9 1159–63

[133] Ostrovskaya L Y, Dementiev A P, Kulakova I I and Ralchenko V G 2005 Chemical state and wettability of ion-irradiated diamond surfaces Diam. Relat. Mater. 14 486–90

[134] Nagase T, Kato H, Pahlovy S A and Miyamoto I 2010 Nanosmoothing of single crystal diamond chips by 1 keV Ar+ ion bombardment J. Vac. Sci. Technol. B 28 263–7

[135] Ieshkin A E, Kushkina K D, Kireev D S, Ermakov Y A and Chernysh V S 2017 Polishing superhard material surfaces with gas-cluster ion beams Tech. Phys. Lett. 43 95–97

[136] Moseler M, Gumbsch P, Casiraghi C, Ferrari A C and Robertson J 2005 The ultrasmoothness of diamond-like carbon surfaces Science 309 1545–8

[137] Tallaire A, Ouisse T, Lantreibecq A, Cours R, Legros M, Bensalah H, Barjon J, Mille V, Brinza O and Achard J 2016 Identification of dislocations in synthetic chemically vapor deposited diamond single crystals Cryst. Growth Des. 16 2741–6

[138] Achard J, Silva F, Brinza O, Bonnin X, Mille V, Issaoui R, Kasu M and Gicquel A 2009 Identification of etch-pit crystallographic faces induced on diamond surface by H2/O2 etching plasma treatment Phys. Status Solidi a 206 1949–54

[139] Crawford K G, Tallaire A, Li X, Macdonald D A, Qi D C and Moran D A J 2018 The role of hydrogen plasma power on surface roughness and carrier transport in transfer-doped H-diamond Diam. Relat. Mater. 84 48–54

[140] Yoshikawa M 1990 Development and performance of a diamond-film polishing apparatus with hot metals Proc. SPIE 1325 210–21

[141] Weima J A, Fahrner W R and Job R 2001 Experimental investigation of the parameter dependency of the removal rate of thermochemically polished CVD diamond films J. Solid State Electrochem. 5 112–8

[142] Pimenov S M, Smolin A A, Ralchenko V G, Konov V I, Likhanski S V, Veselovski I A, Sokolina G A, Bantsekov S V and Spitsyn B V 1993 UV laser processing of diamond films: effects of irradiation conditions on the properties of laser-treated diamond film surfaces Diam. Relat. Mater. 2 291–7

[143] Tokarev V N, Wilson J I B, Jubber M G, John P and Milne D K 1995 Modelling of self-limiting laser ablation of rough surfaces: application to the polishing of diamond films Diam. Relat. Mater. 4 169–76

[144] Singh R K and Lee D G 1996 Excimer laser-assisted planarization of thick diamond films J. Electron. Mater. 25 137–42

[145] Gloor S, Pimenov S M, Obraztsova E D, Lüthy W and Weber H P 1998 Laser ablation of diamond films in various atmospheres Diam. Relat. Mater. 7 607–11

[146] Erdemir A, Halter M, Fenske G R, Krauss A, Gruen D M, Pimenov S M and Konov V I 1997 Durability and tribological performance of smooth diamond films produced by Ar-C60 microwave plasmas and by laser polishing Surf. Coat. Technol. 94–95 537–42

[147] Pimenov S M, Kononenko V V, Ralchenko V G, Konov V I, Gloor S, Lüthy W, Weber H P and Khomich A V 1999 Laser polishing of diamond plates Appl. Phys. A 69 81–88

[148] Gloor S, Lüthy W, Weber H P, Pimenov S M, Ralchenko V G, Konov V I and Khomich A V 1999 UV laser polishing of thick diamond films for IR windows Appl. Surf. Sci. 138–139 135–9

[149] Okuchi T, Ohfuji H, Odake S, Kagi H, Nagatomo S, Sugata M and Sumiya H 2009 Micromachining and surface processing of the super-hard nano-polycrystalline diamond by three types of pulsed lasers Appl. Phys. A 96 833–42