[2] GAO Hai-liang, GU Xing-fa, YU Tao, et al. The research overview on visible and near infrared channels radiometric calibration of space-borne optical remote sensors[J]. Remote Sensing Information, 2010, 4: 117-128.
[3] DONG Yi, LV Jia-yan, SONG Qing-tao, et al. Reflectance radiation calibration principle and process introduction[J]. Innovation and Application of Science and Technology, 2016, 24: 71-72.
[4] HU Xiu-qing, ZHANG Xiu-xiang, QIU Kang-mu. In-flight radiometric calibration for VIR channels of FY-1C satellite sensor by using irradiance-based method[J]. Journal of Remote sensing, 2003, 7(6): 458-464.
[6] SCHMECHTG C, SANTER R P, ROGER J-C, et al. Automatic ground-based station for vicarious calibration[C]. SPIE, 1997, 3221: 309-317.
[7] KEROLA D X, BRUEGGE C J, GROSS H N, et al. On-orbit calibration of the EO-1 Hyperion and advanced land imager (ALI) sensors using the LED spectrometer (LSpec) automated facility[J]. IEEE Transactions on Geoscience and Remote Sensing, 2009, 47(4): 1244-1255.
[8] CZAPLA-MYERS J S, THOME K J, LESSO N P. Radiometric calibration of earth-observing sensors using an automated test site at Railroad Valley Nevada[J]. Canadian Journal of Remote Sensing, 2010, 36(5): 474-487.
[9] CZAPLA-MYERS J S. Automated ground-based methodology in support of vicarious calibration[D]. Tucson: The University of Arizona, 2006: 41-43,54-57.
[10] QIU Gang-gang, LI Xin, WEI Wei, et al. Experiment and analysis of on-orbit radiometric calibration for remote sensors based on in-site automated observation technology[J]. Acta Optica Sinica, 2016, 36(7): 0701001.
[11] LI Xin, ZHENG Xiao-bing, XUN Li-na, et al. Design of automated field hyperspectral BRDF measurement system[J]. Optical Technique, 2008, 34(2): 262-268.
[12] SANDMEIER S T, MULLER C H, HOSGOOD B, et al. Sensitivity analysis and quality assessment of laboratory BRDF data[J]. Remote Sensing of Environment, 1998, 64: 176-191.
[13] DUGGIN M J, CUNIA T. Ground reflectance measurement techniques: a comparison[J].Applied Optics, 1983, 22(23): 3771-3777.
[16] TANG Chuan-jun, ZHANG Jian, LI Jian, et al. Fatigue analysis of transmission gear shaft based on workbench[J]. Automobile Applied Technology, 2014, 2: 1-4.
[17] LI Li, QIAO Yan-li, GU Xing-fa, et al. A laboratory verification method of wide field vision effect based on miniature model[J]. Remote Sensing Information, 2013, 28(2): 70-75, 81.