[1] AN CH H, ZHANG Y, XU Q, et al.. Modeling of dynamic characteristic of the aerostatic bearing spindle in an ultra-precision fly cutting machine [J]. International Journal of Machine Tool & Manufacture, 2010, 50: 374-385.
[2] YE SH L, LI D SH. Study on mechanical characteristics of aerostatic bearing with finite volume method [J]. Opt. Precision Eng., 2008, 16(5): 809-814. (in Chinese)
[3] MIYATAKE M, YOSHIMOTO S. Numerical investigation of static and dynamic characteristics of aerostatic thrust bearings with small feed holes [J]. Tribology International, 2010, 43: 1353-1359.
[4] ZHANG J H, ZHANG SH G, ZHAO H X, et al.. Structure design and test for guide unloading system of large ultraprecision machine [J]. Opt. Precision Eng., 2007, 15(9): 1382-1390. (in Chinese)
[5] LEE W B, CHEUNG C F. A dynamic surface profile model for the prediction of nano surface generation in ultra-precision machining [J]. International Journal of Mechanical Sciences, 2001, 43: 961-991.
[6] ZHAO Q L, GUO B, YANG H, et al.. Technological parameter optimization of micro-structured surfaces by diamond fly-cutting [J]. Opt. Precision Eng., 2009, 17(10): 2512-2519. (in Chinese)
[7] FREW D A, SCHEFFER C. Numerical modelling of a high-speed rigid rotor in a single-aerostatic bearing using modified Euler equations of motion [J]. Mechanical Systems and Signal Processing, 2008, 22: 133-154.
[8] LIU Q, ZHANG C P. H-type air bearing motion stage driven by linear motors [J]. Opt. Precision Eng., 2007, 15(10): 1540-1546. (in Chinese)
[9] LI Y T, HAN D. Influences of the geometrical parameters of aerostatic thrust bearing with pocketed orifice-type restrictor on its performance [J]. Tribology International, 2007, 40: 1120-1126.
[10] KASSAB S Z, NOUELDEEN E M, SHAWKY M A. Effects of operating conditions and supply hole diameter on the performance of a rectangular aerostatic bearing [J]. Tribology International, 1997, 30: 533-545.
[11] SCHENK C, BUSCHMANN S, RISSE S, et al.. Comparison between flat aerostatic gas-bearing pads with orifice and porous feedings at high-vacuum conditions [J]. Precision Engineering, 2008, 32: 319-328.
[12] YAO Y X, QIN D L, ZHANG H B. Static performance analysis of orifice compensated externally pressurized gas spherical bearing based on FEM [J]. Key Engineering Materials, 2006, 315-316: 860-863.
[13] CHEN X D, HE X M. The effect of the recess shape on performance analysis of the gas-lubricated bearing in optical lithography [J]. Tribology International, 2006, 39: 1336-1341.
[14] LO CH Y, WANG CH CH, LEE Y H. Performance analysis of high-speed spindle aerostatic bearings [J]. Tribology International, 2005, 38: 5-14.
[15] JI S M, MA B L, TAN D P. Numerical analysis of soft abrasive flow in structured restraint flow passage [J]. Opt. Precision Eng., 2011, 19(9): 2092-2099. (in Chinese)
[16] LIU X J, CHEN R W. Finite element analysis and experiments on Rainbow shape piezoelectric energy transferring elements [J]. Opt. Precision Eng., 2011, 19(4): 789-796. (in Chinese)
[17] KHATAIT J, LIN W, LIN W J. Design and development of orifice-type aerostatic thrust bearing [J]. SIMTech technical reports, 2005, 6(1): 7-12.
[18] WANG Z, LI Z H. Design of optical-mechanical structure for lunar-based extreme ultraviolet camera [J]. Opt. Precision Eng., 2011, 19(10): 2427-2433. (in Chinese)
