[1] N Amanat, C Chaminade, J Grace, et al.. Transmission laser welding of amorphous and semi-crystalline poly-ether-ether-ketone for applications in the medical device industry[J]. Materials & Design, 2010, 31(10): 4823-4830.
[2] Zhu Zegang. Introduction and market application of engineering plastics in automotive[J]. Rubber & Plastics Resources Utilization, 2010, 1: 006.
[3] C Tsao, D L Devoe. Bonding of thermoplastic polymer microfluidics[J]. Microfluidics and Nanofluidics, 2009, 6(1): 1-16
[4] Huang Li. Macromolecular Material[M]. Bei Jing: Chemical Industry Press, 2005: 107-110, 114-116.
[5] X Wang, P Li, Z Xu, et al.. Laser transmission joint between PET and titanium for biomedical application[J]. Journal of Materials Processing Technology, 2010, 210(13): 1767-1771.
[6] Pang Zhenhua, Yang Shaokui, Song Jie, et al.. Technology and typical application of laser welding of plastics[J]. Mechanical Electrical Engineering Technology, 2010, 39(4): 17-19.
[7] T B Juhl, D Bach, G Larson, et al.. Predicting the laser weld ability of dissimilar polymers[J]. Polymer, 2013, 54(15): 3891-3897.
[8] T B Juhl, E A Jensen. Investigation on high strength laser welds of polypropylene and high- density polyethylene[J]. Journal of Applied Polymer Science, 2013, 129(5): 2679-2685.
[9] E Ghorbel, C Giuseppe, S Abed. Laser diode transmission welding of polypropylene geometrical and microstructure characterisation of weld[J]. Matetials and Design, 2009(30): 2745-2751.
[10] M Chen, G Zak, P J Bates. Description of transmitted energy during laser transmission welding of polymers[J]. Welding in the World, 2013, 57(2): 171-178.
[11] M Chen, G Zak, P J Bates. Effect of carbon black on light transmission in laser welding of thermoplastics[J]. Journal of Materials Processing Technology, 2011, 211(1): 43-47.
[12] X Wang, X Song, M Jiang, et al.. Modeling and optimization of laser transmission joining process between PET and 316L stainless steel using response surface methodology[J]. Optics & Laser Technology, 2012, 44(3): 656-663.
[13] B Acherjee, S Mondal, B Tudu, et al.. Application of artificial neural network for predicting weld quality in laser transmission welding of thermoplastics[J]. Applied Soft Computing, 2011, 11(2): 2548-2555.
[14] B Acherjee, A S Kuar, S Mitra, et al.. Experimental investigation on laser transmission welding of PMMA to ABS via response surface modeling[J]. Optics & Laser Technology, 2012, 44(5): 1372-1383.
[15] Xue Guochun, Liu Huixia, Li Pin, et al.. Process study on laser transmission bonding of silicon with glass via response surface methodology[J]. Chinese J lasers, 2013, 40(3): 0303004.
[16] M Devrient, X Da, T Frick, et al.. Experimental and simulative investigation of laser transmission welding under consideration of scattering[J]. Physics Procedia, 2012, 39: 117-127.
[17] X Wang, N Chen, H Liu, et al.. Simulation and optimization of continuous laser transmission welding between PET and titanium through FEM, RSM, GA and experiments[J]. Optics and Lasers in Engineering, 2013, 51(11): 1245-1254.
[18] Chen Hao, Wang Xiao, Liu Huixia, et al.. Numerical simulation-driven optimization of laser transmission welding process between PET and 304L stainless steel[J]. Chinese J Lasers, 2014, 41(4): 0403006.
[19] Zhang Wei, Zhang Qingmao, Guo Liang, et al.. Research on the properties of through-transmission laser welding of polycarbonate [J]. Chinese J Lasers, 2012, 39(7): 0703001.
[20] Wang Jianchao, Qin Liming, Li Jiao. Technics and microcosmic analysis research of PMMA/ABS thermoplastic laser transmission welding[J]. Applied Laser, 2008, 28(4): 287-291.
[21] Luo Hesheng. Plastics Modification and Application Technology[M].Guangzhou: Guangdong Science & Technology Press, 2007: 17-21.
[22] Shen Yu. A Study on PPO/PA6 Alloy with Excellent Properties[D]. Hangzhou: Zhejang University, 2010: 2-3.
[23] U A Russek, A Palmen, H Staub, et al.. Laser beam welding of thermoplastics[J]. SPIE, 2003, 4977: 458-472.