• Opto-Electronic Engineering
  • Vol. 36, Issue 12, 37 (2009)
ZHANG Rong-yan1、2、*, FENG Yan-ying2, YAN Shu-bin1、2, XIONG Ji-jun1, and REN Xiao-hong1
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • show less
    DOI: 10.3969/j.issn.1003-501x.2009.12.008 Cite this Article
    ZHANG Rong-yan, FENG Yan-ying, YAN Shu-bin, XIONG Ji-jun, REN Xiao-hong. A Measurement Method for a CW Laser Modulation Spectrum Based on Optical Beat Frequency[J]. Opto-Electronic Engineering, 2009, 36(12): 37 Copy Citation Text show less

    Abstract

    Because of the limitation of the F-P interferometer for the analysis of a CW laser modulation spectrum,an optical beat frequency method is proposed,which can be used to measure the spectrum with a modulation frequency ~kHz. This method is based on the photoelectric conversion technique. We can get the beat frequency signal of the reference laser and a CW modulation spectrum with the spectrum analyzer,and then have the relative electric field strength of the various optical frequency of a CW laser modulation spectrum through the corresponding mathematical calculation so as to realize the CW modulation spectrum analysis. After theoretically modeling,experiments were carried out to measure a CW laser modulation spectrum generated by a diode laser and an EOM device with the proposed method. Compared with the measuring results with F-P interferometer,experimental results show the feasibility of an optical beat frequency method.
    ZHANG Rong-yan, FENG Yan-ying, YAN Shu-bin, XIONG Ji-jun, REN Xiao-hong. A Measurement Method for a CW Laser Modulation Spectrum Based on Optical Beat Frequency[J]. Opto-Electronic Engineering, 2009, 36(12): 37
    Download Citation