[1] ROCHA C R,TONETTO C P,DIAS A. A comparison between the Denavit–Hartenberg and the screw-based methods used in kinematic modeling of robot manipulators ［J］.Robotics and Computer Integrated Manufacturing.2014 (4).
[2] CHEN X L, SUN X Y, DENG Y. Kinematics Optimum Design of a 5-DOF Spatial Parallel Mechanism ［J］. Transactions of the Chinese Society for Agricultural Machinery, 2014,06:303-307.
[3] ZHAO L, ZHAO X H, WANG SH J, et al.. Kinematic Modeling and Error Analysis of the Plane Six Pole Parallel Robot in high speed ［J］. Machinery Design&Manufacture, 2016,3:157-159.(in Chinese)
[4] LI R J, FAN K CH, HUANG Q X.A long-stroke 3D contact scanning probe for micro/nano coordinate measuring machine ［J］. Precision Engineering-journal of the International Societies for Precision Engineering and Nanotechnology, 2016,43:220-229.
[5] ZHANG C. Mechanical Dynamics ［M］. Beijing: Higher Education Press, 2015,4. (in Chinese)
[6] ZHANG Q H, ZHANG X M. Dynamic modeling and analysis of planar 3-RRR flexible parallel robot［J］.Journal of Vibration Engineering, 2013,26(2): 239-45.
[7] XING H L,BO CH Z R Q. The calibration and error compensation techniques for an Articulated Arm CMM with two parallel rotational axes ［J］.Measurement,2013,46(1): 603-9.
[8] SANTOLARIA J, MAJARENA A C, SAMPER D,et al..Articulated Arm Coordinate Measuring Machine Calibration by Laser Tracker Multi laceration ［J］.Scientific World Journal,2014.
[9] SUO X G,CHENG L,FU Y J. Calibration and uncertainty evaluation of double parallel-joint coordinate measuring machine［J］. Optics and Precision Engineering,22,5,2014(5).
[11] LI S Y,HU P H. Structure optimization of parallel CMM ［J］. Opt. Precision Eng., 2013(11). (in Chinese)
[12] JIANG L ZH, ZHAO Y Y. The Coupling Dynamics of Flexible Structure for a Wide Range of Motion［M］. Beijing: Science Press,2007,5. (in Chinese)
[13] YANG H, HONG J ZH, YU ZH Y. Vibration analysis and experiment investigation for a typical rigid-flexible coupling system ［J］. Journal of Astronautics, 2002,23(3):67-72.(in Chinese)
