Review of surface flashover and surface charge behavior of vacuum insulators

Youhui He; Hongbin Chen; Fei Li; Falun Song

doi:10.11884/HPLPB202335.220214

[1] Zhang Guanjun, Su Guoqing, Song Baipeng, et al. Pulsed flashover across a solid dielectric in vacuum[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 25, 2321-2339(2018).

[2] Lin Chuanjie, Gao Wenhong, Li Qi, . Correlation between epoxy resin process parameters and AC flashover[J]. High Voltage Engineering, 45, 2732-2739(2019).

[3] Cui Yang, Song Baipeng, Yang Yong, . Study on characteristics of secondary electron emission for spacecraft surface materials[J]. Chinese Journal of Vacuum Science and Technology, 41, 770-774(2021).

[4] Xu Yang, Liu Weidong, Gao Wensheng. Research on distribution of the electric field and surface charge of typical defects on GIS insulators with dust figure[J]. Insulators and Surge Arresters, 211-218(2020).

[5] Xu Yang, Liu Weidong, Gao Wensheng. Research on the influence factor of the dust figure used for the measurement of the surface charge and electric field distribution of GIS insulator under AC voltage[J]. Insulators and Surge Arresters, 205-212(2020).

[6] Zhang Boya, Wang Qiang, Qi Zhe, . Measurement method and accumulation characteristics of surface charge distribution on polymeric material under DC voltage[J]. Proceedings of the CSEE, 36, 6664-6674(2016).

[7] Lee S J, Hong A, Kim I H, et al. Surface potential measurements of a polymer film following primary ion gun irradiation for ToF-SIMS analysis of insulator using a Kelvin probe and the observation of effects from the vacuum gauge[J]. Applied Surface Science, 525, 146561(2020).

[8] Zhang Bo, Xue Jianyi, Chen Xingyu, et al. Review of surface transient charge measurement on solid insulating materials via the Pockels technique[J]. High Voltage, 6, 608-624(2021).

[9] Miller H C. Flashover of insulators in vacuum: the last twenty years[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 22, 3641-3657(2015).

[10] Gao Wei, Sun Guangsheng, Yan Ping, . Summary of influence factors about insulator surface flashover in vacuum[J]. High Voltage Apparatus, 41, 456-460,465(2005).

[11] Pillai A S, Hackam R. Surface flashover of solid insulators in atmospheric air and in vacuum[J]. Journal of Applied Physics, 58, 146-153(1985).

[12] Kuffel E, Grzybowski S, Ugarte R B. Flashover across polyethylene and tetrafluoroethylene surfaces in vacuum under direct, alternating and surge voltages of various waveshapes[J]. Journal of Physics D: Applied Physics, 5, 575-579(1972).

[13] Sudarshan T S, Cross J D. The effect of chromium oxide coatings on surface flashover of alumina spacers in vacuum[J]. IEEE Transactions on Electrical Insulation, EI-11, 32-35(1976).

[14] Cross J D, Sudarshan T S. The effect of cuprous oxide coatings on surface flashover of dielectric spacers in vacuum[J]. IEEE Transactions on Electrical Insulation, EI-9, 146-150(1974).

[15] Ohki Y, Yahagi K. Temperature dependence of surface flashover voltage of polyethylene in vacuum[J]. Journal of Applied Physics, 46, 3695-3696(1975).

[16] Zhang Zhenjun, Zheng Xiaoquan, Wu Wenbin, . DC surface flashover characteristics of polyimide in vacuum at different temperatures[J]. Journal of Xi’an Jiaotong University, 48, 47-51(2014).

[17] Tu Youping, Tan Rong, Zhang Guifeng, . DC electrical characteristics of polyimide at cryogenic temperature in vacuum[J]. Proceedings of the CSEE, 33, 194-200(2013).

[18] Suzuki T. Flashover voltage over ceramics in high vacuum[J]. Japanese Journal of Applied Physics, 13, 1541-1546(1974).

[19] Akahane M, Kanda K, Yahagi K. Effect of dielectric constant on surface discharge of polymer insulators in vacuum[J]. Journal of Applied Physics, 44, 2927(1973).

[20] Kofoid M J. Phenomena at the metal-dielectric junctions of high-voltage insulators in vacuum and magnetic field[J]. Transactions of the American Institute of Electrical Engineers. Part III: Power Apparatus and Systems, 79, 991-999(1960).

[21] Sudarshan T S. Electrode architecture related to surface flashover of solid dielectrics in vacuum[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 4, 374-381(1997).

[22] Zhang Guanjun, Yan Zewu, Liu Yi, et al. Influence of electrode contact on luminescence from alumina ceramic surface under ac electric field in vacuum[J]. Applied Physics Letters, 78, 625-627(2001).

[23] Zhang Guanjun, Zhao Wenbin, Yan Zhang, et al. Optical investigation of AC preflashover of alumina ceramic in vacuum[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 11, 498-505(2004).

[24] Yamamoto O, Takuma T, Fukuda M, et al. Improving withstand voltage by roughening the surface of an insulating spacer used in vacuum[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 10, 550-556(2003).

[25] Lang Yan, Wang Yibo, Su Guoqiang, et al. Influence of surface roughness on vacuum flashover acteristics of PMMA[J]. High Voltage Engineering, 2015, 41(2): 474478

[26] Guo Baohong, Sun Guangyu, Zhang Shu, et al. Mechanism of vacuum flashover on surface roughness[J]. Journal of Physics D: Applied Physics, 52, 215301(2019).

[27] Milton O. Pulsed flashover of insulators in vacuum[J]. IEEE Transactions on Electrical Insulation, EI-7, 9-15(1972).

[28] Pillai A S, Hackam R. Surface flashover of conical insulators in vacuum[J]. Journal of Applied Physics, 56, 1374-1381(1984).

[29] Fukuda H, Yamano Y, Kobayashi S, et al. Relationship between vacuum surface flashover ging acteristics f alumina ceramics of lowered resistivity[C]2013 2nd International Conference on Electric Power EquipmentSwitching Technology. 2013: 14.

[30] Lv Jinzhuang. The influence of trap distribution of alumina ceramics on the surface flashover perfmance in vacuum[D]. Beijing: Nth China Electric Power University (Beijing), 2003: 6674

[31] Li Chengrong, Ding Lijian, Lv Jinzhuang, et al. The relation of trap distribution of alumina with surface flashover performance in vacuum[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 13, 79-84(2006).

[32] Li Shengtao, Huang Qifeng, Sun Jian, et al. Effect of traps on surface flashover of XLPE in vacuum[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 17, 964-970(2010).

[33] Anderson R A, Brainard J P. Mechanism of pulsed surface flashover involving electron-stimulated desorption[J]. Journal of Applied Physics, 51, 1414-1421(1980).

[34] Blaise G, Le Gressus C. Charging and flashover induced by surface polarization relaxation process[J]. Journal of Applied Physics, 69, 6334-6339(1991).

[35] Blaise G. New approach to flashover in dielectrics based on a polarization energy relaxation mechanism[J]. IEEE Transactions on Electrical Insulation, 28, 437-443(1993).

[36] Miller H C. Flashover of insulators in vacuum: review of the phenomena and techniques to improved holdoff voltage[J]. IEEE Transactions on Electrical Insulation, 28, 512-527(1993).

[37] Bommakanti R G, Sudarshan T S. Trap-dominated breakdown processes in an insulator bridged vacuum gap[J]. Journal of Applied Physics, 66, 2091-2099(1989).

[38] Kumara S, Serdyuk Y V, Gubanski S M. Simulation of surface charge effect on impulse flashover characteristics of outdoor polymeric insulators[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 17, 1754-1763(2010).

[39] Kato K, Kato H, Ishida T, et al. Influence of surface charges on impulse flashover characteristics of alumina dielectrics in vacuum[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 16, 1710-1716(2009).

[40] Du Boxue, Xiao Meng. Influence of surface charge on DC flashover characteristics of epoxy/BN nanocomposites[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 21, 529-536(2014).

[41] Kumara S, Serdyuk Y V, Gubanski S M. Surface charge decay on polymeric materials under different neutralization modes in air[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 18, 1779-1788(2011).

[42] Jaitly N C, Sudarshan T S. In-situ insulator surface charge measurements in dielectric bridged vacuum gaps using an electrostatic probe[J]. IEEE Transactions on Electrical Insulation, 23, 261-273(1988).

[43] Kindersberger J, Lederle C. Surface charge decay on insulators in air and sulfurhexafluorid—part I: simulation[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 15, 941-948(2008).

[44] Kindersberger J, Lederle C. Surface charge decay on insulators in air and sulfurhexafluorid—part II: measurements[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 15, 949-957(2008).

[45] Wang Dibo, Tang Ju, Liu Kai. Charge accumulation on post insulator surface under HVDC in GIS[J]. High Voltage Engineering, 41, 3073-3081(2015).

[46] Wang Dibo, Tang Ju, Tao Jiagui, . Surface charge accumulation characteristics on polymer after flashover and corona charging under DC voltage[J]. High Voltage Engineering, 41, 3618-3627(2015).

[47] Chen Shixiu, Xie Guangrun. The effect of temperature on the corona performances[J]. High Voltage Engineering, 20, 3-8(1994).

[48] Nakanishi K, Yoshioka A, Arahata Y, et al. Surface charging on epoxy spacer at DC stress in compressed SF6 GAS[J]. IEEE Transactions on Power Apparatus and Systems, PAS-102, 3919-3927(1983).

[49] Lutz B, Kindersberger J. Influence of the relative huity on the DC potential distribution of polymeric cylindrical model insulats[C]Proceedings of the 2010 International Conference on Condition Moniting Diagnosis, 2010: 541544.

[50] Wang Feng, Fang Zhi, Qiu Yuchang. Study of charge accumulation on insulator surface in HVDC gas-insulated switchgear[J]. Proceedings of the CSEE, 25, 105-109(2005).