[1] Weisheng Lei,John Davignon. Solid state UV laser technology for electronic packaging applications[C]. SPIE,2005,5629:314-326

[2] Rajesh S. Patel,James Bovatsek. Processing benefits of high repetition rate and high average power 355 nm laser for micromachining of microelectronics packaging materials[C]. SPIE,2007,6459:64590H

[3] R. Srinivasan,V. Mayne-Banton. Self-developing photoetching of poly films by far-ultraviolet excimer laser radiation[J]. Appl. Phys. Lett.,1982,41(6):576-578

[4] W. J. Lee,Y. S. Lee,S. K. Rha et al.. Adhesion and interface chemical reactions of Cu/polyimide and Cu/TiN by XPS[J]. Applied Surface Science,2003,205(1-4):128-136

[5] K. C. Yung,D. W. Zeng,T. M. Yue. XPS investigation of upilex-S polyimide ablated by 355 nm Nd:YAG laser irradiation[J]. Applied Surface Science,2001,173(3-4):193-202

[6] J. G. Kim,W. S. Chang,K. K. Yoon et al.. Micro-drilling of PCB substrate using DPSS 3rd harmonic laser[C]. SPIE,2003,4830:105-109

[7] Shi Zhaohui,Fan Zhongwei,Zhang Ying et al.. High efficiency and high power all-solid-state ultraviolet laser[J]. Chinese J. Lasers,2007,34(1):29-32

[8] Wan Yunfang,Han Kezhen,Zuo Chunhua et al.. An efficient diode-pumped Nd:YAG/LBO triple-frequency UV laser[J]. Acta Photonica Sinica,2007,36(12):2182-2186

[9] Lü Yanfei,Zhang Xihe,Yao Zhihai et al.. Laser-diode pumped all-solid-state continuous-wave ultraviolet laser at 355 nm[J]. Chinese J. Lasers,2007,34(8):1048-1050

[10] Yutong Feng,Junqing Meng,Weibiao Chen. High repetition rate,compact micro-pulse all-solid-state laser[J]. Chin. Opt. Lett.,2007,5(11):648-650

[11] Tao Li,Zhuang Zhuo,Xiaomin Li et al.. Study on optical characteristics of Nd:YVO4/YVO4 composite crystal laser[J]. Chin. Opt. Lett.,2007,5(3):175-177

[12] Yang Jianhua,Zhang Shuai,Chen Jimin. Experimental research on high power UV laser cutting Cu membrane [J]. Applied Laser,2005,25(5):289-292

[13] Ling Lei,Lou Qihong,Ye Zhenhuan et al.. Ablation of circuit board by pulsed UV laser[J]. Chinese J. Lasers,2003,30(10):953-955

[14] Zhang Fei,Zeng Xiaoyan,Li Xiangyou et al.. Laser etching and cutting printed circuit board by 355 nm and 1064 nm diode pumped solid state lasers[J]. Chinese J. Lasers,2008,35(10):1637-1643

[15] B. S. Shin,J. Y. Oh,H. Sohn. Theoretical and experimental investigation into laser ablation of polyimide and copper films with 355-nm Nd:YVO4 laser[J]. Materials Processing Technology,2007,187-188:260-263

[16] G. C. D Couto,S. V. Badu. Excimer laser ablation of polyimide-doped poly (tetrafluoroethylene) at 240 and 308 nm[J]. J. Appl. Phys.,1993,74(10):5972-5980

[17] X. L. Zhou,W. Wen,J. S. Zhang. A mathematical model of the removal of gold thin film on polymer surface by laser ablation[J]. Surface & Coatings Technology,2005,190(2-3):260-263

[18] S. Y. Bang. Effect of beam parameters on excimer laser ablation[C]. KSPE,2005,22(7):38-46