Laser Damage Resistance of Engineering Ceramics

LI Zhao-yan; SUN Ming-ying; HAO Yan-fei; PANG Xiang-yang; LIU Zhi-gang; ZHANG Ya-nan

doi:10.3788/gzxb20174610.1014003

[1] SOILEAU M J. 40 year retrospective of fundamental mechanisms［C］. SPIE, 2008, 7132: 713201.

[2] MIAO Xin-xiang, CHENG Xiao-feng, YUAN Xiao-dong,et al. Laser-induced damage of fused silica initiated by Cu contamination particles on surface［J］. High Power Laser and Particle Beams, 2010, 22(8): 1740-1744.

[3] WANG Li-bin, MA Wei-xin, JI Lai-lin,et al. Influence of metal particles on damage threshold of fused silica at 3ω［J］. Chinese Journal of Lasers, 2012, 39(5): 0502004.

[4] MIAO Xin-xiang, YUAN Xiao-dong, WANG Cheng-cheng,et al. Laser induced damage in fused silica contaminated by Al film［J］. High Power Laser and Particle Beams, 2010, 22(7): 1653-1656.

[5] HAN Feng-ming, XU Shi-zhen, SONG Wen-liang,et al. Study of nanosecond laser ablation on Aluminum and stainless steel targets［J］. Chinese Journal of Lasers, 2016, 43(2): 0203005.

[6] SHI Shuang, SUN Ming-ying. Effect of surface treatment technology on laser damage resistance of Aluminium alloy［J］.Chinese Journal of Lasers, 2016, 43(12): 02001.

[7] XIAO Han-ning, GAO Peng-zhao. High performance structural ceramics and application［M］. Beijing: Chemical Industry Press, 2006: 83-90.

[8] XIAO Han-ning, LIU Jing-xiong, GUO Wen-ming,et al. Technological state and industrial development of engineering ceramics［J］. Materials for Mechanical Engineering, 2016, 40(6): 1-7.

[9] SUN Zhi-long, CAI Zhi-xiang, YANG Wei, et al. Laser cutting and scribing of 96% Alumina ceramic substrate and parameter optimization［J］. Laser & Optoelectronics Progress, 2015, 52(10): 211-218.

[10] LIU Wen-bin, XIONG Ning, WANG Tie-jun,et al. Study on thermal shock resistance of silicon nitride ceramics prepared by sintering-HIP technique［J］. Bulletin of the Chinese Ceramic Society, 2015, 34(1): 213-216.

[11] ZHANG Bao-guo, TIAN Xin-li, SHE An-ying,et al. Research progress on principle and application of laser machining for engineering ceramics［J］. Modern Manufacturing Engineering, 2012, 10: 5-10.

[12] KIM J D, LEE S J. Characteristics of laser assisted machining for silicon nitride ceramic according to machining parameters［J］. Journal of Mechanical Science and Technology, 2011, 25(4): 995-1001.

[13] HONG Lei, LI Li-jun. A study of laser cutting engineering ceramics［J］. Optics & Laser Technology, 1999, 31: 531-538.

[14] ATANASOV P A, EUGENIEVA E D, NEDIALKOV N N. Laser drilling of silicon nitride and alumina ceramics: A numerical and experimental study ［J］. Journal of Applied Physics, 2001, 89 (4): 2013-2016.

[15] YAN Yin-zhou, JI Ling-fei, BAO Yong, et al. An experimental and numerical study on laser percussion drilling of thick-section alumina ［J］.Journal of Materials Processing Technology, 2012, 212: 1257-1270.

[16] NICOLAS G, AUTRIC M, MARINE W, et al. Laser induced surface modifications on ZrO2 ceramics ［J］. Applied Surface Science 1997, 109(110): 289-292.

[17] ATANASOV P A, IMAMOVA S E, HUEGEL H, et al. Optical parameters of silicon carbide and silicon nitride ceramics in 0.2-1.3μm spectral range［J］. Journal of Applied Physics, 2000, 88(8): 4671-4675.

[18] AN Lian-sheng. Applied optics［M］. Beijing: Beijing Institute of Technology Press, 2008: 226-227.

[19] ANOOP N S, NARENDRA B D. Laser machining of structural ceramics-A review［J］. Journal of the European Ceramic Society, 2009, 29(6): 969-993.

[20] HAN Jing-hua, LI Ya-guo, ZHANG Qiu-hui,et al. Phase explosion induced by high-repetition rate pulsed laser［J］. Applied Surface Science, 2010, 256(22): 6649-6654.