[1] WU D J, CAO X S, WANG Q G, et al.. Damage detection and analysis of machined KDP crystal subsurface［J］. Opt. Precision Eng., 2007,15(11):1721-1726. (in Chinese)

[2] WANG ZH, WU Y L, DAI Y F, et al.. Rapid detection of subsurface damage of optical materials in lapping process and its influence regularity［J］. Opt. Precision Eng., 2008,16(1):16-21. (in Chinese)

[3] LAMBROPOULOS J C,XU S,FANG T, et al.. Twyman effect mechanics in grinding and microgrinding［J］. Appl. Opt., 1996,35:5704-5713.

[4] SURATWALA T,WONG L,MILLER P, et al.. Sub-surface mechanical damage distribution during grinding of fused silica［J］. J. Non-cryst. Solids., 2006,352(52-54):5601-5617.

[5] MENAPACE J A,DAVIS P J,STEELE W A, et al.. MRF applications: measurement of process-dependent subsurface damage in optical materials using the MRF wedge technique［J］. SPIE, 2005,5991:39-49.

[6] SABIA R, STEVENS H J,VARNER R. Pitting of a glass-ceramic during polishing with cerium oxide［J］. J. Non-cryst. Solids., 1999,249:123-130.

[7] WANG ZH. Study on the key techniques of subsurface damage in optical fabrication［D］. Changsha:National University of Defense Technology, 2008.

[8] ERIN J,GOLINI D. Surface interactions between nanodiamonds and glass in Magnetorheological Finishing (MRF)［D］. New York:University of Rochester, 2007.

[9] HALLOCK B,DUMAS P,SHOREY A, et al.. Recent advances in deterministic, low-cost finishing of sapphire windows［J］. SPIE, 2005,5786:154-164.

[10] ZHANG F, ZHANG B ZH. Surface roughness of optical elements fabricated by magnetic fluid-assisted polishing［J］. Opt.Precision Eng., 2005,13(1): 34-38. (in Chinese)

[11] ZHANG F, YU J CH, ZHANG X J, et al.. Magnetorheological finishing technology［J］. Opt. Precision Eng., 1995,7(5):1-7.(in Chinese)

[12] CARR J W,FEARON E,SUMMERS L J,et al.. Subsurface damage assessment with atomic force microscopy［C］. Lawrence Livermore National Laboratory (LLNL) Report, 1999,April 16:1-4.