[1] M. Hedges, N. Calder. Near Net Shape Rapid Manufacture & Repair by LENS［R］. AVT-139 Report, 2006. 13

[2] P. Vuoristo, J. Vihinen. High-performance laser coatings for manufacturing and maintenance of industrial components and equipment［J］. Maintenance Research in Finland, 2002, (5): 2～8

[3] Yang Xichen, Li Huishan, Liu Yunwu et al.. Laser remanufacturing technology and its industrial application［J］. China Surface Engineering, 2003, 6(4): 43～46

[4] C. Bremer. Automated repair and overhaul of aero-engine and industrial gas turbine components［C］. ASME Turbo Expo 2005, 2005. 841～846

[5] D. W. Gandy, G. Frederick, J. T. Stover et al.. Overview of hot section components repair methods［C］. ASM Materials Solutions Conference & Exposition, Energy & Utilities Program, 2000. 9～12

[6] K. H. Richter, S. Orban, S. Nowotny. Laser cladding of the titanium alloy Ti6242 to restore damaged blades［C］. Proceedings of the 23rd International Congress on Applications of Lasers and Electro-Optics, 2004. 4～7

[7] Wang Xiaoyan, Chen Jing, Lin Xin et al.. Microstructure of laser forming repair 7050 aluminum alloy with AlSi12 powder［J］. Chinese J. Lasers, 2009, 36(6): 1586～1590

[8] Guo Yongli, Liang Gongying, Li Lu. Laser cladding reparation of aluminum alloy［J］. Chinese J. Lasers, 2008, 35(2): 303～306

[9] Yang Yongqiang, Wang Di, Wu Weihui. Research progress of direct manufacturing of metal parts by selective laser melting［J］. Chinese J. Lasers, 2011, 38(6): 0601007

[10] L. Sexton, S. Lavin, G. Byrne et al.. Laser cladding of aerospace materials［J］. J. Mater. Process. Technol., 2002, 122(1): 63～68

[11] Xue Lei, Chen Jing, Zhang Fengying et al.. Laser rapid repair of the aircraft components of titanium alloy［J］. Rare Metal Materials and Engineering, 2006, 35(11): 1817～1820

[12] Li Jianing, Chen Chuanzhong. Research situation of laser cladding technology in aviation manufacturing［J］. Aeronautical Manufacturing Technology, 2010, (5): 51～54

[13] W. Kurz, D. J. Fisher. Fundamentals of Solidification (2nd ed.)［M］. Enfield: Trans. Tech. Publications, 1998. 51

[14] N. A. Berjeza, S. P. Velikevitch, V. I. Mazhukin et al.. Influence of temperature gradient to solidification velocity ratio on the structure transformation in pulsed- and CW-laser surface treatment［J］. Appl. Surf. Sci., 1995, 86(1-5): 303～309

[15] Wang Weifu, Wang Maocai, Zhang Jie et al.. Research on the microstructure and wear resistance of titanium alloy structural members repaired by laser cladding［J］. Optics and Lasers in Engineering, 2008, 46(11): 810～816

[16] Lin Xin, Xue Lei, Chen Jing et al.. Microstructure and mechanical properties of laser forming repaired Ti-6Al-4V alloy component［J］. China Surface Engineering, 2009, 22(1): 19～24

[17] Chen Jing, Zhang Qiang, Liu Yanhong et al.. Research on microstructure and high-temperature properties of Ti17 titanium alloy fabricated by laser solid forming［J］. Chinese J. Lasers, 2011, 38(6): 0603022

[18] Li Liqun, Zhang Liang, Dai Jingming. Numerical simulation of temperature and stress fields in wire filling laser multilayer welding［J］. Chinese J. Lasers, 2011, 38(10): 1003002

[19] Wang Jinyou, Ge Zhiming, Zhou Yanbang et al.. Aerospace Titanium Alloy［M］. Shanghai: Shanghai Science and Technology Press, 1985. 201～221

[20] C. Leyens, M. Peters. Titanium and Titanium Alloys［M］. Beijing: Chemical Industry Press, 2005. 15

[21] Tao Chunhu, Zhong Peidao, Wang Renzhi et al.. Failure Analysis and Prevention for Rotor in Aero-Engine［M］. Beijing: National Defense Industry Press, 2001. 46

[22] Jia Wenpeng, Lin Xin, Chen Jing et al.. Temperatrue stress field numerical simulation of hollow blade produced by laser rapid forming［J］. Chinese J. Lasers, 2007, 34(9): 1308～1312

[23] Jia Wenpeng, Lin Xin, Tan Hua et al.. Numerical simulation for temperatrue field of TC4 titanium alloy hollow blade during laser rapid forming process［J］. Rare Metal Materials and Engineering, 2007, 36(7): 1193～1199