[1] DONG Q, HUANG C, DUAN G, et al. Facile synthesis and electrical performance of silica-coated copper powder for copper electronic pastes on low temperature co-fired ceramic［J］. Materials Letters, 2017, 186: 263-266.
[2] MYEONG I K M, EUN B C, JONG-HYUN L. Improved sinter-bonding properties of silver-coated copper flake paste in air by the addition of sub-micrometer silver-coated copper particles［J］. Journal of Materials Research and Technology, 2020, 9(6): 16006-16017.
[3] ZHANG B, HE F, CAO X H, et al. Effect of SiO2/BaO ratio on sintering behavior, crystallization behavior, and properties of SrO-BaO-B2O3-SiO2 glass-ceramics［J］. Ceramics International, 2021, 47(13): 19043-19051.
[5] HLINA J, REBOUN J, JOHAN J, et al. Reliability of printed power resistor with thick-film copper terminals［J］. Microelectronic Engineering, 2019, 216: 111095.
[6] LU Y C, Li Y X, CHEN D M, et al. High-performance electrical properties of La-based perovskite ceramics for the functional phase of thick film resistors［J］. Journal of Alloys and Compounds, 2021, 867: 159035.
[7] STANIMIROVIC Z, JEVTIC M M, STANIMIROVIC I. Simultaneous mechanical and electrical straining of conventional thick-film resistors［J］. Microelectronics Reliability, 2008, 48(1): 59-67.
[8] KIM J M, KIM Y K. Thin crystalline silicon solar cell bonded to sintered substrate with aluminum paste［J］. Solar Energy Materials and Solar Cells, 2005, 86(4): 577-584.
[13] SHIM S B, KIM D S, HWANG S, et al. Wetting and surface tension of bismate glass melt［J］. Thermochimica Acta, 2009, 496(1/2): 93-96.
[14] HONG Y J, JUNG D S, KOO H Y. Characteristics of ZnO-B2O3-SiO2-CaO glass frits prepared by spray pyrolysis as inorganic binder for Cu electrode［J］. Journal of Alloys and Compounds, 2011, 509(31): 8077-8081.
[19] REDDY C N, CHAKRADHAR R P S. Elastic properties and spectroscopic studies of fast ion conducting Li2OZnOB2O3 glass system［J］. Materials Research Bulletin, 2007, 42(7): 1337-1347.
[20] AL-BARADI A M, ABDEL W E A, SHAABAN K S. Preparation and characteristics of B2O3-SiO2-Bi2O3-TiO2-Y2O3 glasses and glass-ceramics［J］. Silicon, 2022, 14(10): 5277-5287.
[21] ARORA M, BACCARO S, SHARMA G, et al. Radiation effects on PbO-Al2O3-B2O3-SiO2 glasses by FTIR spectroscopy［J］. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions With Materials and Atoms, 2009, 267(5): 817-820.
[22] YANO T, KUNIMINE N, SHIBATA S, et al. Structural investigation of sodium borate glasses and melts by Raman spectroscopy. II. Conversion between BO4 and BO2O-units at high temperature［J］. Journal of Non-Crystalline Solids, 2003, 321(3): 147-156.
[23] PARKINSON B G, HOLLAND D, SMITH M E, et al. Quantitative measurement of Q3 species in silicate and borosilicate glasses using Raman spectroscopy［J］. Journal of Non-Crystalline Solids, 2008, 354(17): 1936-1942.
[24] SALINIGOPAL M S, GOPAKUMAR N, ANJANA P S, et al. Structural, optical and dielectric properties of aluminoborosilicate glasses［J］. Journal of Electronic Materials, 2020, 49(1): 695-704.
[26] WANG Z L, GAN L Q, HUANG W J. Structural recovery and optical properties stabilization of CeO2/TiO2-doped boroaluminosilicate glass under gamma irradiation［J］. Radiation Physics and Chemistry, 2018, 151: 133-140.
[27] DHARA A, MISHRA R K, SHUKLA R, et al. A comparative study on the structural aspects of sodium borosilicate glasses and Barium borosilicate glasses: effect of Al2O3 addition［J］. Journal of Non-Crystalline Solids, 2016, 447: 283-289.
[28] QIAN G J, NIKL M, BEI J F, et al. Temperature dependence of photoluminescence in ZnO-containing glasses［J］. Optical Materials, 2007, 30(1): 91-94.
[29] NESBITT H W, BANCROFT G M, HENDERSON G S. Bridging, non-bridging and free (O2-) oxygen in Na2O-SiO2 glasses: an X-ray Photoelectron Spectroscopic (XPS) and Nuclear Magnetic Resonance (NMR) study［J］. Journal of Non-Crystalline Solids, 2011, 357(1): 170-180.
