[1] S AHN, J CHA, H MYUNG et al. Continuous ultraviolet roll nanoimprinting process for replicating large-scale nano- and micropatterns. Applied Physics Letters, 89, 213101-213103(2006).

[2] P H HUANG, T C HUANG, Y T SUN et al. Large-area and thin light guide plates fabricated using UV-based imprinting. Optics Express, 16, 15033-15038(2008).

[3] Donggang YAO, V L VIRUPAKSHA, B KIM. Study on squeezing flow during nonisothermal embossing of polymer microstructures. Polymer Engineering and Science, 45, 652-660(2005).

[4] Yue LI, Guang YANG, Dingrong DENG et al. Effect of chromium coating thickness on surface adhesion of polyethylene terephthalate optical film. Surfaces and Interfaces, 26, 1042901-1042911(2021).

[5] Yujun DENG, Peiyun YI, Linfa PENG et al. Experimental investigation on the large-area fabrication of micro-pyramid arrays by roll-to-roll hot embossing on PVC film. Journal of Micromechanics and Microengineering, 24, 04502301-04502312(2014).

[6] Yang GUAN. Survey on improvement of visibility and significance painting measures for emergency vehicles in UK and USA. Auto and Safety, 26, 64-72(2020).

[7] J M WOOD, R MARSZALEK, P LACHEREZ et al. Configuring retroreflective markings to enhance the night-time conspicuity of road workers. Accident Analysis and Prevention, 70, 209-214(2014).

[8] H LE, L LE, Mingjun CHEN et al. ECE/SAE dual functional superpin plus curved reflex reflector by use of new structured corner cubes. Applied Sciences, 10, 454-470(2020).

[9] Yun JI, Meizhen HUANG, Xia LI et al. Analysis and measurement of ultra-high reflectivity retro-reflection film of micro cutting cube corner prisms. Acta Photonica Sinica, 45, 0226001(2016).

[10] Han LUO, Changying YUAN. Structure optimization of retroreflective sheeting based on laminae combination technique. Chinese Journal of Lasers, 42, 224-229(2015).

[11] Jinghe YUAN, Shengjiang CHANG, Sumei LI et al. Design and fabrication of micro-cube-corner array retro-reflectors. Optics Communication, 209, 75-83(2002).

[12] H KIM, B LEE. Optimal design of retroreflection corner-cube sheets by geometric optics analysis. Optical Engineering, 46, 094002-094014(2007).

[13] Kai TANG, Zhien CHEN, Huarong DENG et al. Study on far-field diffraction pattern of cube corner retroreflector at oblique incidence. Acta Physica Sinica, 70, 154201(2021).

[14] Hui NIE, Xingtao WENG, Song LI et al. The far-filed diffractive characteristics of cube-corner prism. Acta Optica Sinica, 23, 1470-1474(2003).

[15] Jinghe YUAN, Yanxin ZHANG, Yong WANG et al. Diffractive properties of the micro-prism retro-reflectors. Journal of Optoelectronics Laser, 12, 30-33(2001).

[16] Jun PI, Hui LU, Tao JIANG et al. Influence of geometry structure of microstructure on reflective characteristics of the micro-prism film in the nonplanar state. Acta Photonica Sinica, 50, 0308001(2021).

[17] Xiaofeng ZHOU, Zumin QI, Xiangqian LUO et al. A method to diverge reflect beam uniformly using cube-corner retroreflector array with dihedral angle tolerances. Acta Physica Sinica, 66, 084201(2017).

[18] H ROGER, C JOHN, E MARK et al. Cube-corner retroreflective articles having tailored divergence profiles.

[19] A SIDNEY, J ANTHONY, A LIVIU et al. Retroreflective articles having a microcube, and tools and methods for forming a microcube.

[20] M IKUO, H CHIHIRO, A KEIJI. Triangular pyramid type cube corner retroreflection article, and its manufacturing method.

[21] Xiaojing LU, G GAUER, D JACOB et al. Prismatic retroreflector having a multi-plane facet.

[22] Yong CHENG, Yang LIU, Lixin XU et al. Mutual-injection phase-locking fiber laser with corner-cube cavity. Chinese Journal of Lasers, 36, 77-81(2009).

[23] Zumin QI, Xiaofeng ZHOU, Jianguo ZHU et al. Method to diverge reflected beam using planoconcave len and normal cube-corner prism. Acta Optica Sinica, 36, 277-283(2016).

[24] Yuchuan YANG, Hui LUO. Backward diffractive characteristics analysis of cube corner prism by Zemax. Infrared and Laser Engineering, 39, 491-495(2010).