[1] Grass H, Krempaszky C and Werner E 2006 3-D FEM-simulation of hot forming processes for the production of a connecting rod Comput. Mater. Sci. 36 480–9
[2] Behrens B A, Doege E, Reinsch S, Telkamp K, Daehndel H and Specker A 2007 Precision forging processes for high-duty automotive components J. Mater. Process. Technol. 185 139–46
[3] Liu X, Xu Y C and Yuan S J 2011 Hydro-forming of aluminum alloy complex-shaped components Trans. Nonferr. Met. Soc. China 21 s417–22
[4] Karbasian H and Tekkaya A E 2010 A review on hot stamping J. Mater. Process. Technol. 210 2103–18
[5] Liu X C, El Fakir O, Meng L C, Sun X G, Li X D and Wang L L 2018 Effects of lubricant on the IHTC during the hot stamping of AA6082 aluminium alloy: experimental and modelling studies J. Mater. Process. Technol. 255 175–83
[6] Wilson W R D, Hsu T C and Huang X B 1995 A realistic friction model for computer simulation of sheet metal forming processes J. Eng. Ind. 117 202–9
[7] Bhushan B 2013 Introduction to Tribology 2nd edn (New York: Wiley)
[8] Wang Z G 2004 Tribological approaches for green metal forming J. Mater. Process. Technol. 151 223–7
[9] Bay N, Olsson D D and Andreasen J L 2008 Lubricant test methods for sheet metal forming Tribol. Int. 41 844–53
[10] Dowson D and Whomes T L 1966 Paper 8: side-leakage factors for a rigid cylinder lubricated by an isoviscous fluid Proc. Inst. Mech. Eng. Conf. Proc. 181 165–76
[11] Wilson W R D and Hector L G Jr 1991 Hydrodynamic lubrication in axisymmetric stretch forming-part 1: theoretical analysis J. Tribol. 113 659–66
[12] Bowden F P and Tabor D 2001 The Friction and Lubrication of Solids (Oxford : Oxford University Press)
[13] Begelinger A and de Gee A W J 1976 On the mechanism of lubricant film failure in sliding concentrated steel contacts J. Lubr. Technol. 98 579
[14] Hu Y, Wang L, Politis D J and Masen M A 2017 Development of an interactive friction model for the prediction of lubricant breakdown behaviour during sliding wear Tribol. Int. 110 370–7
[15] Dohda K, Boher C, Rezai-Aria F and Mahayotsanun N 2015 Tribology in metal forming at elevated temperatures Friction 3 1–27
[16] Cui S G, Zhu H T, Wan S H, Tran B, Wang L and Tieu K 2018 Investigation of different inorganic chemical compounds as hot metal forming lubricant by pin-on-disc and hot rolling Tribol. Int. 125 110–20
[17] Pelcastre L, Hardell J and Prakash B 2013 Galling mechanisms during interaction of tool steel and Al–Si coated ultra-high strength steel at elevated temperature Tribol. Int. 67 263–71
[18] Podgornik B, Kafexhiu F, Kosec T, Jerina J and Kalin M 2017 Friction and anti-galling properties of hexagonal boron nitride (h-BN) in aluminium forming Wear 388–389 2–8
[19] Wang L, He Y, Zhou J and Duszczyk J 2010 Effect of temperature on the frictional behaviour of an aluminium alloy sliding against steel during ball-on-disc tests Tribol. Int. 43 299–306
[20] Venema J, Hazrati J, Matthews D T A, Stegeman R A and van den Boogaard A H 2018 The effects of temperature on friction and wear mechanisms during direct press hardening of Al–Si coated ultra-high strength steel Wear 406–407 149–55
[21] Wang W R, Zhao Y Z, Wang Z M, Hua M and Wei X C 2016 A study on variable friction model in sheet metal forming with advanced high strength steels Tribol. Int. 93 17–28
[22] Zhang D W and Ou H A 2016 Relationship between friction parameters in a Coulomb–Tresca friction model for bulk metal forming Tribol. Int. 95 13–18
[23] Wilson W R D 1978 Friction and lubrication in bulk metal-forming processes J. Appl. Metalwork. 1 7–19
[24] Czichos H 1974 Failure criteria in thin film lubrication—the concept of a failure surface Tribology 7 14–20
[25] Salomon G 1976 Failure criteria in thin film lubrication—the IRG program Wear 36 1–6
