[2] Wei X P, Zheng W J, Song Z G et al. Effects of heat treatment on microstructure and mechanical properties of Inconel 718 alloy[J]. Transactions of Materials and Heat Treatment, 33, 53-58(2012).
[3] Niu J, Zhang F Y, Yang S L et al[J]. Effects of aging treatments on the microstructure and mechanical properties of GH4169 alloy Aeronautical Manufacturing Technology, 2016, 45-48.
[4] Zhang Q L, Yao J H, Mazumder J. Laser direct metal deposition technology and microstructure and composition segregation of Inconel 718 superalloy[J]. Journal of Iron and Steel Research International, 18, 73-78(2011).
[5] Zhang Y C, Li Z G, Nie P L et al. Effect of ultrarapid cooling on microstructure of laser cladding IN718 coating[J]. Surface Engineering, 29, 414-418(2013).
[13] Sui S, Chen J, Ma L et al. Microstructures and stress rupture properties of pulse laser repaired Inconel 718 superalloy after different heat treatments[J]. Journal of Alloys and Compounds, 770, 125-135(2019).
[14] Zhang J, Zhang Q L, Chen Z J et al. Effects of solution temperature on microstructure and properties of Inconel 718 alloy fabricated via laser additive manufacturing[J]. Surface Technology, 48, 47-53(2019).
[15] Shen J L. Study on the characteristics of δ phase precipitation and its effect on welding seam fracture in GH4169 alloy[D]. Guiyang: Guizhou University, 22-33(2018).
[16] Zhang Q L, Li D, Zhang J et al. Influence of pre-fabricated groove angle on microstructure and properties of laser additive remanufactured IN718 alloy[J]. Surface Technology, 48, 90-96(2019).
[17] Di X J, Xing X X, Wang B S. Nucleation and coarsening mechanism of δ phase in Inconel 625 deposited metal[J]. Acta Metallurgica Sinica, 50, 323-328(2014).
[18] Zhang J L. Effect of δ-phase on the microstructural evolution and properties of GH4169 alloy[D]. Tianjin: Tianjin University, 23-32(2017).
[19] Li Y M, Zhu R M, Liu H J et al. Effect of long-time aging on precipitated phase and tensile properties of GH625 alloy[J]. The Chinese Journal of Nonferrous Metals, 29, 262-269(2019).