Research on Calculation of Defect Area of Building Exterior Windows Based on Infrared Image Processing Technology

Lingling ZHANG; Ao XU; Jiran ZHANG; Panpan REN; Libin DING; Daixiao WEI

[1] Mathur U, Damle R. Impact of air infiltration rate on the thermal transmittance value of building envelope[J]. Journal of Building Engineering, 2021, 40: 102302.

[2] Lai Y, Ridley I, Brimblecombe P. Blower-door estimates of PM 2.5 deposition rates and penetration factors in an idealized room[J]. Indoor and Built Environment, 2022, 31(8): 2064-2082.

[6] Figuli L, Papan D, Papánová Z, et al. Experimental mechanical analysis of traditional in-service glass windows subjected to dynamic tests and hard body impact[J]. Smart Structures and Systems, 2021, 27(2): 365-378.

[7] JI Y, Duanmu L. Airtightness field tests of residential buildings in Dalian, China[J]. Building and Environment, 2017, 119(7): 20-30.

[8] Barreira E, Almeida R M S F, Moreira M. An infrared thermography passive approach to assess the effect of leakage points in buildings[J]. Energy & Buildings, 2017, 140(4): 224-235.

[9] Freitas S S D, Freitas V P D, Barreira E . Detection of fade plaster detachments using infrared thermography – a nondestructive technique[J]. Construction & Building Materials, 2014, 70(11): 80-87.

[10] Ibarra-Castanedo C, Sfarra S, Klein M, et al. Solar loading thermography: time-lapsed thermographic survey and advanced thermographic signal processing for the inspection of civil engineering and cultural heritage structures[J]. Infrared Physics & Technology, 2017, 82: 56-74.

[11] Mahmoodzadeh M, Gretka V, Wong S, et al. Evaluating patterns of building envelope air leakage with infrared thermography[J]. Energies, 2020, 13(14): 3545.

[12] CHEN Y F, SANG N. Attention-based hierarchical fusion of visible and infrared images[J]. Optik, 2015, 126(23): 4243-4248.

[13] Lourenco Tomás, Matias Luís, Faria P. Anomalies detection in adhesive wall tiling systems by infrared thermography[J]. Construction and Building Materials, 2017, 148: 419-428.

[14] Hiasa S H, Birgul R, Catbas N, et al. A data processing methodology for infrared thermography images of concrete bridges[J]. Computers & Structures, 2017, 190(10): 205-218.

[15] Omar T, Nehdi M L, Zayed T. Infrared thermography model for automated detection of delamination in RC bridge decks[J]. Construction & Building Materials, 2018, 168: 313-327.

[16] LV C, WANG K, GU G, et al. Accurate full-edge detection and depth measurement of internal defects using digital speckle pattern interferometry[J]. NDT & E International, 2019, 102(3): 1-8.

[17] Mohan A, Poobal S. Crack detection using image processing: A critical review and analysis[J]. Alexandria Engineering Journal, 2017: 787-798.

[18] HAN Q, YIN Q, ZHENG X, et al. Remote sensing image building detection method based on mask R-CNN[J]. Complex & Intelligent Systems, 2022, 8(1): 1847-1835.

[19] Gehri N, J Mata-Falcón, Kaufmann W. Automated crack detection and measurement based on digital image correlation[J]. Construction and Building Materials, 2020, 256: 119383.

[20] Thusyanthan I, Blower T, Cleverly W. Innovative uses of thermal imaging in civil engineering[J]. Proceedings of the Institution of Civil Engineers, 2017, 170(CE2): 81-87.

[21] Ostańska Anna. Thermal imaging for detection of defects in envelopes of buildings in use: qualitative and quantitative analysis of building energy performance[J]. Periodica Polytechnica Civil Engineering, 2018, 62(4): 939-946.

[22] PAN N H, Tsai C H, CHEN K Y, et al. Enhancement of external wall decoration material for the building in safety inspection method[J]. Journal of Civil Engineering and Management, 2020, 26: 216-226.

[23] JIANG M. Edge enhancement and noise suppression for infrared image based on feature analysis[J]. Infrared Physics & Technology, 2018, 91: 142-152.

[24] Kim C, Choi J S, Jang H, et al. Automatic detection of linear thermal bridges from infrared thermal images using neural network[J]. Applied Sciences, 2021, 11(3): 931.

[25] CHEN L, WANG Y, JIA S, et al. Development of panoramic infrared images for surface temperature analysis of buildings and infrastructures[J]. Energy and Buildings, 2020, 232(1): 110660.

[26] D Antón, Amaro-Mellado J L. Engineering graphics for thermal assessment: 3D thermal data visualisation based on infrared thermography, GIS and 3D point cloud processing software[J]. Symmetry, 2021, 13(2): 335.

[27] Mun J, Lee J, Kim M. Estimation of infiltration rate (ACH Natural) using blower door test and simulation[J]. Energies, 2021, 14(4): 912.

[28] LI X, ZHOU W, LIN D. Research on air infiltration predictive models for residential building at different pressure[J]. Building Simulation, 2020: 1-12.

[29] DI Yue, LI Meiyan, QIAO Tong, et al. Edge detection and mathematic fitting for corneal surface with Matlab software[J]. International Journal of Ophthalmology, 2017, 10(3): 336-342.

[30] Thenkabail P S, Biradar R M, Noojipady P, et al. Sub-pixel area calculation methods for estimating irrigated areas[J]. Sensors, 2007, 7(11): 2519.