[2] WANG Shulei.Discussion on the blast technology in medium section tunnel[J].Railway Construction Technology,2009,174(4):5759，64.（in Chinese）

[4] PENG Limin.Traffic tunnel engineering[M].Changsha：Central South University Press,2003.（in Chinese）

[6] LANGEFORS U,KIHLSTROM B.Modern technology of rock blast[M].Beijing:Metallurgy Industry Press,1983.（in Chinese）

[7] SHAPRIO V Y.Efficiency of cut configuration in driving tunnels with a set of deep blast holes[J].Journal of Mining Science,1989,25(4):379386.

[9] ZONG Qi,ZHANG Guoyong.Study on some techniques of cutting blasting and smooth blasting of mediumdeep blasting in rock tunnel[J].Journal of Huainan Institute of Technology,2001,21(2):1821.（in Chinese）

[11] SHAN Renliang,HUANG Baolong,GAO Wenjiao,et al.Case studies of new technology application of quasiparallel cut blasting in rock roadway drivage[J].Chinese Journal of Rock Mechanics and Engineering,2011,30(2):224232.（in Chinese）

[13] ZHANG Zhaoran,YANG Renshu.Multistep cutting technology and its application in rock roadways[J].Chinese Journal of Rock Mechanics and Engineering,2019,38(3):551559.（in Chinese）

[15] WANG Ping.Optimization of wedge cut blasting parameters in large section tunnel[D].Nanning：Guangxi University,2020.（in Chinese）

[17] YAN Gaowen.Wedge and straight hole cutting blasting technology of three arm rock drilling trolley in tunnel construction[J].China High and New Technology,2019(4):7779.（in Chinese）

[19] LI Peng,LIU Peng.Application of large diameter parallel hole cut blasting on small crosssection roadway excavation[J].Yunnan Metallurgy,2022,51(4):2227.（in Chinese）

[21] JI Liaoyuan.Application of new technology in construction of long tunnel with small section[J].Shaanxi Water Resources,2020(8):209210，213.（in Chinese）

[23] ZHANG Shaoran,CHEN Huayi,JIAO Weigang,et al.Rock breaking mechanism and blasting parameters of straighthole cutting with emptyhole[J].Journal of China Coal Society,2020,45(S2):791800.（in Chinese）

[25] WANG Yuanlai,SHI Xiuzhi,WANG Famin,et al.Optimization of blasting parameters of burn cut in underground mine[J].Mining and Metallurgical Engineering,2021,41(5):3640.（in Chinese）

[27] XIONG Liang,ZHENG Wenqiang.Optimization design and application of cutting slot in blasting excavation of roadway[J].Modern Mining,2018,34(2):7173.（in Chinese）

[29] YANG Renshu.Present status and outlook on safety and high efficient heading technology of mine rock roadway in China[J].Coal Science and Technology,2013,41(9):1823.（in Chinese）

[31] FENG Haibao,JIANG Wande,QU Lili,et al.Overbreak /shortbreak control technology for and cost analysis on rock tunnels constructed by drilling and blasting method:case study on tunnels on JiujiangRuichang Highway[J].Tunnel Construction,2012,32(6):887891.（in Chinese）

[32] LEE T,KIM D,SEO Y.The development of methods for minimizing the overbreak in tunnel blasting[C]∥Proceedings of the Annual Conference on Explosives and Blasting Technique.ISEE;1999,2003,2:5768.

[33] SMITH P D,VISMEG P,TEO L C,et al.Blast wave transmission along roughwalled tunnels[J].International Journal of Impact Engineering,1998,21(6):419432.

[35] WANG Xuguang.Blasting manual[M].Beijing：Metallurgical Industry Press,2010.（in Chinese）

[37] WANG Wei,HUAI Pingsheng,JIANG Shiliang.Efficient driving method for large section tunnel by burn cut blasting with uncharged holes[J].Blasting,2022,39(3):7681.（in Chinese）