• Optics and Precision Engineering
  • Vol. 21, Issue 2, 287 (2013)
DAI Zi-hua*, ZHU Yong-wei, WANG Jian-bin, JU Zhi-lan, and LIU Yun-feng
Author Affiliations
  • [in Chinese]
  • show less
    DOI: 10.3788/ope.20132102.0287 Cite this Article
    DAI Zi-hua, ZHU Yong-wei, WANG Jian-bin, JU Zhi-lan, LIU Yun-feng. Measurement of sub-surface damage of K9 glass by step-by-step etching method[J]. Optics and Precision Engineering, 2013, 21(2): 287 Copy Citation Text show less

    Abstract

    To remove the effect of environmental conditions on the measuring accuracy of HF acid differential corrosion rate method, a HF step-by-step etching method was proposed. The correction factor Ki was introduced to correct the environmental changes in different etching steps and to improve the measuring accuracy. Experiments show that the sub-surface damage layer depth of the K9 glass after Fixed Abrasive Pad(FAP) lapping is 3.479 μm measured by the HF step-by-step etching method. As compared with 0.837 μm and 2.82 μm measured by the HF acid differential corrosion rate method and the magneto-rheological finishing spot method, respectively, it demonstrates that the proposed method in this paper has higher measurement accuracy and is in well accordance with the actual situation. Furthermore, the introduction of experimental correction factor Ki reduces the accumulation errors brought by the operating environments.
    DAI Zi-hua, ZHU Yong-wei, WANG Jian-bin, JU Zhi-lan, LIU Yun-feng. Measurement of sub-surface damage of K9 glass by step-by-step etching method[J]. Optics and Precision Engineering, 2013, 21(2): 287
    Download Citation