Textured Asymmetric Membrane Electrode Assemblies of Piezoelectric Phosphorene and Ti3C2Tx MXene Heterostructures for Enhanced Electrochemical Stability and Kinetics in LIBs

Yihui Li; Juan Xie; Ruofei Wang; Shugang Min; Zewen Xu; Yangjian Ding; Pengcheng Su; Xingmin Zhang; Liyu Wei; Jing-Feng Li; Zhaoqiang Chu; Jingyu Sun; Cheng Huang

doi:10.1007/s40820-023-01265-5

[1] D. Griggs, M. Stafford-Smith, O. Gaffney, J. Rockström, M.C. Öhman et al., Sustainable development goals for people and planet. Nature 495, 305 (2013).

[2] Y. Xiang, L. Xu, L. Yang, Y. Ye, Z. Ge et al., Natural stibnite for lithium-/sodium-ion batteries: carbon dots evoked high initial coulombic efficiency. Nano-Micro Lett. 14, 136 (2022).

[3] M. Han, Y. Mu, J. Guo, L. Wei, L. Zeng et al., Monolayer MoS2 fabricated by in situ construction of interlayer electrostatic repulsion enables ultrafast ion transport in lithium-ion batteries. Nano-Micro Lett. 15, 80 (2023).

[4] D. Ying, Q. Xu, R. Ding, Y. Huang, T. Yan et al., Insight into pseudocapacitive-diffusion mixed kinetics and conversion-alloying hybrid mechanisms of low-cost Zn-Mn perovskite fluorides anodes for powerful Li-ion/dual-ion storage. Chem. Eng. J. 388, 124154 (2020).

[5] C. Chen, C.-S. Lee, Y. Tang, Fundamental understanding and optimization strategies for dual-ion batteries: a review. Nano-Micro Lett. 15, 121 (2023).

[6] Y. Li, R. Ding, Z. Jia, W. Yu, A. Wang et al., Unlocking the intrinsic mechanisms of a-site K/Na doped perovskite fluorides pseudocapacitive cathode materials for enhanced aqueous zinc-based batteries. Energy Storage Mater. 57, 334–345 (2023).

[7] A. Wang, R. Ding, Y. Li, M. Liu, F. Yang et al., Redox electrolytes-assisting aqueous Zn-based batteries by pseudocapacitive multiple perovskite fluorides cathode and charge storage mechanisms. Small 19, 2302333 (2023).

[8] R. Ding, X. Li, W. Shi, Q. Xu, X. Han et al., Perovskite KNi0.8Co0.2F3 nanocrystals for supercapacitors. J. Mater. Chem. A 5, 17822–17827 (2017).

[9] Q. Xu, R. Ding, W. Shi, D. Ying, Y. Huang et al., Perovskite KNi0.1Co0.9F3 as a pseudocapacitive conversion anode for high-performance nonaqueous Li-ion capacitors and dual-ion batteries. J. Mater. Chem. A 7, 8315–8326 (2019).

[10] D. Ying, R. Ding, Y. Huang, W. Shi, Q. Xu et al., Conversion pseudocapacitance-contributing and robust hetero-nanostructural perovskite KCo0.54Mn0.46F3 nanocrystals anchored on graphene nanosheet anodes for advanced lithium-ion capacitors, batteries and their hybrids. J. Mater. Chem. A 7, 18257–18266 (2019).

[11] T. Yan, R. Ding, Y. Huang, D. Ying, C. Tan et al., A novel sodium-ion supercabattery based on vacancy defective Ni–Co–Mn ternary perovskite fluoride electrode materials. J. Mater. Chem. A 9, 14276–14284 (2021).

[12] D. Ying, Y. Li, R. Ding, W. Shi, Q. Xu et al., Nanosilver-promoted trimetallic Ni–Co–Mn perovskite fluorides for advanced aqueous supercabatteries with pseudocapacitive multielectrons phase conversion mechanisms. Adv. Funct. Mater. 31, 2101353 (2021).

[13] Z. Jia, R. Ding, W. Yu, Y. Li, A. Wang et al., Unraveling the charge storage and activity-enhancing mechanisms of zn-doping perovskite fluorides and engineering the electrodes and electrolytes for wide-temperature aqueous supercabatteries. Adv. Funct. Mater. 32, 2107674 (2022).

[14] F. Yang, R. Ding, Z. Jia, W. Yu, Y. Li et al., High specific energy and power sodium-based dual-ion supercabatteries by pseudocapacitive Ni–Zn–Mn ternary perovskite fluorides@reduced graphene oxides anodes with conversion-alloying-intercalation triple mechanisms. Energy Storage Mater. 53, 222–237 (2022).

[15] H. Li, Practical evaluation of Li-ion batteries. Joule 3, 911–914 (2019).

[16] N. Zhang, T. Deng, S. Zhang, C. Wang, L. Chen et al., Critical review on low-temperature Li-ion/metal batteries. Adv. Mater. 34, 2107899 (2021).

[17] W. Cao, J. Zhang, H. Li, Batteries with high theoretical energy densities. Energy Storage Mater. 26, 46–55 (2020).

[18] M. Ko, S. Chae, J. Ma, N. Kim, H.-W. Lee et al., Scalable synthesis of silicon-nanolayer-embedded graphite for high-energy lithium-ion batteries. Nat. Energy 1, 16113 (2016).

[19] Y. Zhang, X. Rui, Y. Tang, Y. Liu, J. Wei et al., Wet-chemical processing of phosphorus composite nanosheets for high-rate and high-capacity lithium-ion batteries. Adv. Energy Mater. 6, 1502409 (2016).

[20] D. Li, H. Wang, T. Zhou, W. Zhang, H.K. Liu et al., Unique structural design and strategies for germanium-based anode materials toward enhanced lithium storage. Adv. Energy Mater. 7, 1700488 (2017).

[21] J. Sun, G. Zheng, H.-W. Lee, N. Liu, H. Wang et al., Formation of stable phosphorus–carbon bond for enhanced performance in black phosphorus nanoparticle–graphite composite battery anodes. Nano Lett. 14, 4573–4580 (2014).

[22] Y. Zhang, H. Wang, Z. Luo, H.T. Tan, B. Li et al., An air-stable densely packed phosphorene–graphene composite toward advanced lithium storage properties. Adv. Energy Mater. 6, 1600453 (2016).

[23] Q. Yao, C. Huang, Y. Yuan, Y. Liu, S. Liu et al., Theoretical prediction of phosphorene and nanoribbons as fast-charging li ion battery anode materials. J. Phys. Chem. C 119, 6923–6928 (2015).

[24] H. Liu, Y. Du, Y. Deng, P.D. Ye, Semiconducting black phosphorus: Synthesis, transport properties and electronic applications. Chem. Soc. Rev. 44, 2732–2743 (2015).

[25] H. Jin, S. Xin, C. Chuang, W. Li, H. Wang et al., Black phosphorus composites with engineered interfaces for high-rate high-capacity lithium storage. Science 370, 192 (2020).

[26] Y. Zhang, L. Wang, H. Xu, J. Cao, D. Chen et al., 3D chemical cross-linking structure of black phosphorus@CNTs hybrid as a promising anode material for lithium ion batteries. Adv. Funct. Mater. 30, 1909372 (2020).

[27] F. Xia, H. Wang, Y. Jia, Rediscovering black phosphorus as an anisotropic layered material for optoelectronics and electronics. Nat. Commun. 5, 4458 (2014).

[28] X. Zhang, H. Xie, Z. Liu, C. Tan, Z. Luo et al., Black phosphorus quantum dots. Angew. Chem. Int. Ed. 54, 3653–3657 (2015).

[29] Z. Guo, H. Zhang, S. Lu, Z. Wang, S. Tang et al., From black phosphorus to phosphorene: basic solvent exfoliation, evolution of raman scattering, and applications to ultrafast photonics. Adv. Funct. Mater. 25, 6996–7002 (2015).

[30] R. Meng, J. Huang, Y. Feng, L. Zu, C. Peng et al., Black phosphorus quantum dot/Ti3C2 Mxene nanosheet composites for efficient electrochemical lithium/sodium-ion storage. Adv. Energy Mater. 8, 1801514 (2018).

[31] J. Sun, H.W. Lee, M. Pasta, H. Yuan, G. Zheng et al., A phosphorene–graphene hybrid material as a high-capacity anode for sodium-ion batteries. Nat. Nanotechnol. 10, 980–985 (2015).

[32] X. Guo, W. Zhang, J. Zhang, D. Zhou, X. Tang et al., Boosting sodium storage in two-dimensional phosphorene/Ti3C2Tx MXene nanoarchitectures with stable fluorinated interphase. ACS Nano 14, 3651–3659 (2020).

[33] W. Ma, J. Lu, B. Wan, D. Peng, Q. Xu et al., Piezoelectricity in multilayer black phosphorus for piezotronics and nanogenerators. Adv. Mater. 32(7), 1905795 (2020).

[34] B.-S. Lee, J. Yoon, C. Jung, D.Y. Kim, S.-Y. Jeon et al., Silicon/carbon nanotube/BaTiO3 nanocomposite anode: evidence for enhanced lithium-ion mobility induced by the local piezoelectric potential. ACS Nano 10, 2617–2627 (2016).

[35] R. Li, G. Zhang, Y. Wang, Z. Lin, C. He et al., Fast ion diffusion kinetics based on ferroelectric and piezoelectric effect of SnO2/BaTiO3 heterostructures for high-rate sodium storage. Nano Energy (2021).

[36] Y. Li, X. Dong, Z. Xu, M. Wang, R. Wang et al., Piezoelectric 1T phase MoSe2 nanoflowers and crystallographically textured electrodes for enhanced low-temperature zinc-ion storage. Adv. Mater. 35, 2208615 (2023).

[37] L. Chen, G. Zhou, Z. Liu, X. Ma, J. Chen et al., Scalable clean exfoliation of high-quality few-layer black phosphorus for a flexible lithium ion battery. Adv. Mater. 28, 510–517 (2016).

[38] H. Liu, Y. Zou, L. Tao, Z. Ma, D. Liu et al., Sandwiched thin-film anode of chemically bonded black phosphorus/graphene hybrid for lithium-ion battery. Small 13, 1700758 (2017).

[39] J. Zheng, L.A. Archer, Crystallographically textured electrodes for rechargeable batteries: symmetry, fabrication, and characterization. Chem. Rev. 122, 14440–14470 (2022).

[40] C. Huang, Q.M. Zhang, A. Jákli, Nematic anisotropic liquid-crystal gels—self-assembled nanocomposites with high electromechanical response. Adv. Funct. Mater. 13, 525–529 (2003).

[41] Y. Yan, L.D. Geng, H. Liu, H. Leng, X. Li, Y.U. Wang, S. Priya, Near-ideal electromechanical coupling in textured piezoelectric ceramics. Nat. Commun. 13, 3565 (2022).

[42] X. Yue, J. Zhang, Y. Dong, Y. Chen, Z. Shi, X. Xu, X. Li, Z. Liang, Reversible Li plating on graphite anodes through electrolyte engineering for fast-charging batteries. Angew. Chem. Int. Ed. 62, e202302285 (2023).

[43] M.K. Aslam, Y. Niu, M. Xu, Mxenes for non-lithium-ion (Na, K, Ca, Mg, and Al) batteries and supercapacitors. Adv. Energy Mater. 11, 2000681 (2021).

[44] G. Kresse, J. Furthmüller, Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set. Phys. Rev. B 54, 11169–11186 (1996).

[45] P.E. Blöchl, Projector augmented-wave method. Phys. Rev. B 50(24), 17953–17979 (1994).

[46] J.P. Perdew, K. Burke, M. Ernzerhof, Generalized gradient approximation made simple. Phys. Rev. Lett. 77, 3865–3868 (1996).

[47] W. Windl, M.M. Bunea, R. Stumpf, S.T. Dunham, M.P. Masquelier, First-principles study of boron diffusion in silicon. Phys. Rev. Lett. 83, 4345–4348 (1999).

[48] W. Gao, Y. Zhou, X. Wu, Q. Shen, J. Ye, Z. Zou, State-of-the-art progress in diverse black phosphorus-based structures: basic properties, synthesis, stability, photo- and electrocatalysis-driven energy conversion. Adv. Funct. Mater. 31, 2005197 (2021).

[49] J. Cheng, L. Gao, T. Li, S. Mei, C. Wang et al., Two-dimensional black phosphorus nanomaterials: emerging advances in electrochemical energy storage science. Nano-Micro Lett. 12, 179 (2020).

[50] S. Ge, L. Zhang, P. Wang, Y. Fang, Intense, stable and excitation wavelength-independent photoluminescence emission in the blue-violet region from phosphorene quantum dots. Sci. Rep. 6, 27307 (2016).

[51] S. Jana, S. Mukherjee, A. Ghorai, S.B.N. Bhaktha, S.K. Ray, Negative thermal quenching and size-dependent optical characteristics of highly luminescent phosphorene nanocrystals. Adv. Optical. Mater. 8, 2000180 (2020).

[52] L.B. Drissi, S. Sadki, K. Sadki, Phosphorene under strain: electronic, mechanical and piezoelectric responses. J. Phys. Chem. Solids 112, 137–142 (2018).

[53] H. Li, P. Lian, Q. Lu, J. Chen, R. Hou et al., Excellent air and water stability of two-dimensional black phosphorene/mxene heterostructure. Mater. Res. Express. 6, 065504 (2019).

[54] F. Meng, M. Seredych, C. Chen, V. Gura, S. Mikhalovsky et al., Mxene sorbents for removal of urea from dialysate: a step toward the wearable artificial kidney. ACS Nano 12, 10518–10528 (2018).

[55] C. Zhang, Interfacial assembly of two-dimensional mxenes. J. Energy Chem. 60, 417–434 (2021).

[56] Y.-F. Tian, G. Li, D.-X. Xu, Z.-Y. Lu, M.-Y. Yan et al., Micron-sized simgyox with stable internal structure evolution for high-performance Li-ion battery anodes. Adv. Mater. 34, 2200672 (2022).

[57] J. Rivnay, S.C.B. Mannsfeld, C.E. Miller, A. Salleo, M.F. Toney, Quantitative determination of organic semiconductor microstructure from the molecular to device scale. Chem. Rev. 112, 5488–5519 (2012).

[58] M. Ghidiu, M.R. Lukatskaya, M.-Q. Zhao, Y. Gogotsi, M.W. Barsoum, Conductive two-dimensional titanium carbide ‘clay’ with high volumetric capacitance. Nature 516, 78–81 (2014).

[59] Y. Zhao, H. Wang, H. Huang, Q. Xiao, Y. Xu et al., Surface coordination of black phosphorus for robust air and water stability. Angew. Chem. Int. Ed. 55, 5003–5007 (2016).

[60] M. Naguib, M. Kurtoglu, V. Presser, J. Lu, J. Niu et al., Two-dimensional nanocrystals produced by exfoliation of Ti3AlC2. Adv. Mater. 23, 4248–4253 (2011).

[61] N. Sun, Z. Guan, Q. Zhu, B. Anasori, Y. Gogotsi et al., Enhanced ionic accessibility of flexible MXene electrodes produced by natural sedimentation. Nano-Micro Lett. 12, 89 (2020).

[62] C.M. Park, H.J. Sohn, Black phosphorus and its composite for lithium rechargeable batteries. Adv. Mater. 19, 2465–2468 (2007).

[63] Y. Li, K. Chang, E. Shangguan, D. Guo, W. Zhou et al., Powder exfoliated MoS2 nanosheets with highly monolayer-rich structures as high-performance lithium-/sodium-ion-battery electrodes. Nanoscale 11, 1887–1900 (2019).

[64] J. Lu, G. Xia, S. Gong, C. Wang, P. Jiang et al., Metallic 1T phase MoS2 nanosheets decorated hollow cobalt sulfide polyhedra for high-performance lithium storage. J. Mater. Chem. A 6, 12613–12622 (2018).

[65] R. Zhao, Z. Qian, Z. Liu, D. Zhao, X. Hui et al., Molecular-level heterostructures assembled from layered black phosphorene and Ti3C2 MXene as superior anodes for high-performance sodium ion batteries. Nano Energy 65, 104037 (2019).

[66] Y. Li, K. Chang, H. Tang, B. Li, Y. Qin et al., Preparation of oxygen-deficient WO3-x nanosheets and their characterization as anode materials for high-performance li-ion batteries. Electrochim. Acta 298, 640–649 (2019).

[67] H. Huang, R. Xu, Y. Feng, S. Zeng, Y. Jiang et al., Sodium/potassium-ion batteries: boosting the rate capability and cycle life by combining morphology, defect and structure engineering. Adv. Mater. 32, 1904320 (2020).

[68] Y. Jiang, J. Liu, Definitions of pseudocapacitive materials: a brief review. Energy Environ. Mater. 2, 30–37 (2019).

[69] C.E.P. Villegas, A.R. Rocha, A. Marini, Anomalous temperature dependence of the band gap in black phosphorus. Nano Lett. 16, 5095–5101 (2016).

[70] S. Huang, F. Wang, G. Zhang, C. Song, Y. Lei et al., From anomalous to normal: temperature dependence of the band gap in two-dimensional black phosphorus. Phys. Rev. Lett. 125, 156802 (2020).

[71] X. Jiang, X. Zhang, Z. Hua, D. Han, W. Zhao et al., Ferromagnetic titanium doped black phosphorus. Phys. Lett. A 383, 2097–2101 (2019).

[72] T. Ramireddy, T. Xing, M.M. Rahman, Y. Chen, Q. Dutercq et al., Phosphorus–carbon nanocomposite anodes for lithium-ion and sodium-ion batteries. J. Mater. Chem. A 3, 5572–5584 (2015).

[73] C. Marino, A. Debenedetti, B. Fraisse, F. Favier, L. Monconduit, Activated-phosphorus as new electrode material for li-ion batteries. Electrochem. Commun. 13, 346–349 (2011).

[74] R. Amine, A. Daali, X. Zhou, X. Liu, Y. Liu et al., A practical phosphorus-based anode material for high-energy lithium-ion batteries. Nano Energy 74, 104849 (2020).

[75] T. Ichitsubo, S. Yukitani, K. Hirai, S. Yagi, T. Uda et al., Mechanical-energy influences to electrochemical phenomena in lithium-ion batteries. J. Mater. Chem. 21, 2701–2708 (2011).

微信扫一扫：分享

微信扫一扫：分享