[1] Lalegani Dezaki M, Serjouei A, Zolfagharian A, Fotouhi M,Moradi M, Ariffin M K A and Bodaghi M 2022 A review on additive/subtractive hybrid manufacturing of directed energy deposition (DED) process Adv. Powder Mater.1 100054

[2] Chu W S, Kim C S, Lee H T, Choi J O, Park J I, Song J H,Jang K H and Ahn S H 2014 Hybrid manufacturing in micro/nano scale: a review Int. J. Precis. Eng.Manuf.-Green Technol. 1 75–92

[3] Choi K S, Liu W N, Sun X, Khaleel M A and Fekete J R 2009 Influence of manufacturing processes and microstructures on the performance and manufacturability of advanced high strength steels J. Eng. Mater. Technol. 131 041205

[4] Deng W W, Wang C Y, Lu H F, Meng X K, Wang Z, Lv J M,Luo K Y and Lu J Z 2023 Progressive developments,challenges and future trends in laser shock peening of metallic materials and alloys: A comprehensive review Int.J. Mach. Tool. Manu. 191 104061

[5] Zhang H O, Qian Y P, Wang G L and Zheng Q G 2006 The characteristics of arc beam shaping in hybrid plasma and laser deposition manufacturing Sci. China E 49 238–47

[6] Zhang H O, Qian Y P and Wang G L 2006 Study of rapid and direct thick coating deposition by hybrid plasma-laser manufacturing Surf. Coat. Technol. 201 1739–44

[7] Colegrove P A, Coules H E, Fairman J, Martina F,Kashoob T, Mamash H and Cozzolino L D 2013 Microstructure and residual stress improvement in wire and arc additively manufactured parts through high-pressure rolling J. Mater. Process. Technol.213 1782–91

[8] Silva C M A, Bragan?a I M F, Cabrita A, Quintino L and Martins P A F 2017 Formability of a wire arc deposited aluminium alloy J. Braz. Soc. Mech. Sci. Eng. 39 4059–68

[9] Merklein M, Junker D, Schaub A and Neubauer F 2016 Hybrid additive manufacturing technologies—an analysis regarding potentials and applications Phys. Proc.83 549–59

[10] Manogharan G, Wysk R, Harrysson O and Aman R 2015 AIMS—a metal additive-hybrid manufacturing system:system architecture and attributes Proc. Manuf. 1 273–86

[11] Lu X, Yang X Y, Zhao X, Yang H B and Li M V 2022 Additively manufactured AlSi10Mg ultrathin walls:microstructure and nano-mechanical properties under different energy densities and interlayer cooling times Mater. Sci. Eng. A 835 142652

[12] Danish M, Rubaiee S, Gupta M K, Yildirim M B and Ahmed A 2023 Technological and tribological characteristics improvement of additively manufactured SS 316L components machined under sustainable cooling conditions Tribol. Int. 181 108329

[13] Lu H F, Wang Z, Cai J, Xu X, Luo K Y, Wu L J and Lu J Z 2021 Effects of laser shock peening on the hot corrosion behaviour of the selective laser melted Ti6Al4V titanium alloy Corros. Sci. 188 109558

[14] Xu G, Wu R B, Luo K Y and Lu J Z 2022 Effects of heat treatment on hot corrosion behavior of directed energy deposited In718/316L functionally graded material Corros. Sci. 197 110068

[15] Sun R J et al 2018 Microstructure, residual stress and tensile properties control of wire-arc additive manufactured 2319 aluminum alloy with laser shock peening J. Alloys Compd.747 255–65

[16] Mahamood R M, Jen T C, Akinlabi S A, Hassan S,Abdulrahman K O and Akinlabi E T 2021 Role of additive manufacturing in the era of Industry 4.0 Additive Manufacturing ed M Manjaiah, K Raghavendra,N Balashanmugam and J P Davim (Woodhead Publishing)pp 107–26

[17] Queva A, Guillemot G, Moriconi C, Metton C and Bellet M 2020 Numerical study of the impact of vaporisation on melt pool dynamics in laser powder bed fusion—application to IN718 and Ti–6Al–4V Addit.Manuf. 35 101249

[18] Liu J G and Wen P 2022 Metal vaporization and its influence during laser powder bed fusion process Mater. Des.215 110505

[19] Benoit M J, Sun S D, Brandt M and Easton M A 2021 Processing window for laser metal deposition of Al 7075 powder with minimized defects J. Manuf. Process.64 1484–92

[20] Bustillos J, Kim J and Moridi A 2021 Exploiting lack of fusion defects for microstructural engineering in additive manufacturing Addit. Manuf. 48 102399

[21] Mumtaz K and Hopkinson N 2009 Top surface and side roughness of Inconel 625 parts processed using selective laser melting Rapid Prototyp. J. 15 96–103

[22] Emminghaus N, Hoff C, Hermsdorf J and Kaierle S 2021 Residual oxygen content and powder recycling: effects on surface roughness and porosity of additively manufactured Ti-6Al-4V Addit. Manuf. 46 102093

[23] Zhao X M, Lin X, Chen J, Xue L and Huang W D 2009 The effect of hot isostatic pressing on crack healing,microstructure, mechanical properties of Rene88DT superalloy prepared by laser solid forming Mater. Sci.Eng. A 504 129–34

[24] Fu J, Li H, Song X and Fu M W 2022 Multi-scale defects in powder-based additively manufactured metals and alloys J. Mater. Sci. Technol. 122 165–99

[25] Fu J, Qu S, Ding J H, Song X and Fu M W 2021 Comparison of the microstructure, mechanical properties and distortion of stainless steel 316 L fabricated by micro and conventional laser powder bed fusion Addit. Manuf.44 102067

[26] Yadroitsev I and Yadroitsava I 2015 Evaluation of residual stress in stainless steel 316L and Ti6Al4V samples produced by selective laser melting Virtual Phys. Prototyp.10 67–76

[27] Verhaeghe F, Craeghs T, Heulens J and Pandelaers L 2009 A pragmatic model for selective laser melting with evaporation Acta Mater. 57 6006–12

[28] King W E, Barth H D, Castillo V M, Gallegos G F,Gibbs J W, Hahn D E, Kamath C and Rubenchik A M 2014 Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing J. Mater.Process. Technol. 214 2915–25

[29] Khairallah S A, Anderson A T, Rubenchik A and King W E 2016 Laser powder-bed fusion additive manufacturing: physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones Acta Mater.108 36–45

[30] Zhang W X, Hou W Y, Deike L and Arnold C 2022 Understanding the Rayleigh instability in humping phenomenon during laser powder bed fusion process Int.J. Extrem. Manuf. 4 015201

[31] du Plessis A 2019 Effects of process parameters on porosity in laser powder bed fusion revealed by x-ray tomography Addit. Manuf. 30 100871

[32] Zhang G H, Chen J, Zheng M, Yan Z Y, Lu X F, Lin X and Huang W D 2020 Element vaporization of Ti-6Al-4V alloy during selective laser melting Metals 10 435

[33] Yin J, Zhang W Q, Ke L D, Wei H L, Wang D Z, Yang L L,Zhu H H, Dong P, Wang G Q and Zeng X Y 2021 Vaporization of alloying elements and explosion behavior during laser powder bed fusion of Cu–10Zn alloy Int. J.Mach. Tools Manuf. 161 103686

[34] Juechter V, Scharowsky T, Singer R F and K?rner C 2014 Processing window and evaporation phenomena for Ti–6Al–4V produced by selective electron beam melting Acta Mater. 76 252–8

[35] Sui S et al 2023 Additive manufacturing of magnesium and its alloys: process-formability-microstructure-performance relationship and underlying mechanism Int. J. Extrem.Manuf. 5 042009

[36] Zhuo L R, Song B, Li R D, Wei Q S, Yan C Z and Shi Y S 2020 Effect of element evaporation on the microstructure and properties of CuZnAl shape memory alloys prepared by selective laser melting Opt. Laser Technol. 127 106164

[37] Zhou W W, Tsunoda K, Nomura N and Yoshimi K 2020 Effect of hot isostatic pressing on the microstructure and fracture toughness of laser additive-manufactured MoSiBTiC multiphase alloy Mater. Des. 196 109132

[38] Poulin J R, Kreitcberg A and Brailovski V 2021 Effect of hot isostatic pressing of laser powder bed fused Inconel 625 with purposely induced defects on the residual porosity and fatigue crack propagation behavior Addit. Manuf.47 102324

[39] Sugavaneswaran M, Jebaraj A V, Kumar M D B, Lokesh K and Rajan A J 2018 Enhancement of surface characteristics of direct metal laser sintered stainless steel 316L by shot peening Surf. Interfaces 12 31–40

[40] Dorman M, Toparli M B, Smyth N, Cini A, Fitzpatrick M E and Irving P E 2012 Effect of laser shock peening on residual stress and fatigue life of clad 2024 aluminium sheet containing scribe defects Mater. Sci. Eng. A548 142–51

[41] Wang Z, Gao C F, Liu Z Q, Wang Z, Liu X, Wong K,Zhou Z Y and Xiao Z Y 2020 Investigation of microstructural evolution in a selective laser melted Ti6Al4V alloy induced by an ultrasonic surface rolling process Mater. Sci. Eng. A 772 138696

[42] Li R D, Yuan T C, Qiu Z L, Zhou K C and Li J L 2014 Nanostructured Co–Cr–Fe alloy surface layer fabricated by combination of laser clad and friction stir processing Surf. Coat. Technol. 258 415–25

[43] Zheng H X, Luo Y, Zang J Y and Jiang W C 2022Comparison of strengthening effect and fatigue properties of SAF2205 cruciform welded joints by ultrasonic impact and cavitation jet peening treatment Mater. Sci. Eng. A852 143717

[44] Zhang P et al 2021 A review on the effect of laser pulse shaping on the microstructure and hot cracking behavior in the welding of alloys Opt. Laser Technol. 140 107094

[45] Bozkurt Y B, Kovac? H, Yetim A F and ?elik A 2022 Tribocorrosion properties and mechanism of a shot peened AISI 4140 low-alloy steel Surf. Coat. Technol. 440 128444

[46] Damon J, Dietrich S, Vollert F, Gibmeier J and Schulze V 2018 Process dependent porosity and the influence of shot peening on porosity morphology regarding selective laser melted AlSi10Mg parts Addit. Manuf. 20 77–89

[47] Tong Z P, Liu H L, Jiao J F, Zhou W F, Yang Y and Ren X D 2020 Improving the strength and ductility of laser directed energy deposited CrMnFeCoNi high-entropy alloy by laser shock peening Addit. Manuf. 35 101417

[48] Cui Z Q, Mi Y J, Qiu D, Dong P, Qin Z, Gong D Q and Li W G 2021 Microstructure and mechanical properties of additively manufactured CrMnFeCoNi high-entropy alloys after ultrasonic surface rolling process J. Alloys Compd. 887 161393

[49] Deng Q C, Wu Y J, Su N, Chang Z Y, Chen J, Peng L M and Ding W J 2021 Influence of friction stir processing and aging heat treatment on microstructure and mechanical properties of selective laser melted Mg-Gd-Zr alloy Addit.Manuf. 44 102036

[50] Zhao R X, Wang J, Cao T W, Hu T, Shuai S S, Xu S Z,Qian M, Chen C Y and Ren Z M 2023 Additively manufactured Ti–6Al–4V alloy by high magnetic field heat treatment Mater. Sci. Eng. A 871 144926

[51] Todaro C J, Easton M A, Qiu D, Zhang D, Bermingham M J,Lui E W, Brandt M, St John D H and Qian M 2020 Grain structure control during metal 3D printing by high-intensity ultrasound Nat. Commun. 11 142

[52] Hu Y, Wang L, Yao J H, Xia H C, Li J H and Liu R 2020 Effects of electromagnetic compound field on the escape behavior of pores in molten pool during laser cladding Surf. Coat. Technol. 383 125198

[53] Fan W, Tan H, Zhang F Y, Feng Z, Wang Y X, Zhang L C,Lin X and Huang W D 2021 Overcoming the limitation of in-situ microstructural control in laser additive manufactured Ti–6Al–4V alloy to enhanced mechanical performance by integration of synchronous induction heating J. Mater. Sci. Technol. 94 32–46

[54] Chen D, Cai Y H, Luo Y, Tu J and Tang F S 2020 Analysis on the microstructure regulation based on the pulsed laser oscillating molten pool in laser-PTA additive manufacturing J. Manuf. Process. 59 587–94

[55] Wang L, Yao J H, Hu Y, Zhang Q L, Sun Z and Liu R 2017 Influence of electric-magnetic compound field on the WC particles distribution in laser melt injection Surf. Coat.Technol. 315 32–43

[56] Du D F, Haley J C, Dong A P, Fautrelle Y, Shu D, Zhu G L,Li X, Sun B D and Lavernia E J 2019 Influence of static magnetic field on microstructure and mechanical behavior of selective laser melted AlSi10Mg alloy Mater. Des.181 107923

[57] Liu D H, Wu D J, Wang R Z, Shi J G, Niu F Y and Ma G Y 2022 Formation mechanism of Al-Zn-Mg-Cu alloy fabricated by laser-arc hybrid additive manufacturing:microstructure evaluation and mechanical properties Addit. Manuf. 50 102554

[58] Stephens R W B 1964 Physical Acoustics—Principles and Methods (128s. 6d Ultrasonics2 219) Vol I, ed W P Mason(Academic) p 515

[59] Wang B, Tan D Y, Lee T L, Khong J C, Wang F, Eskin D,Connolley T, Fezzaa K and Mi J W 2018 Ultrafast synchrotron x-ray imaging studies of microstructure fragmentation in solidification under ultrasound Acta Mater. 144 505–15

[60] Suslick K S and Price G J 1999 Applications of ultrasound to materials chemistry Annu. Rev. Mater. Sci. 29 295–326

[61] Abramov O V 1994 Ultrasound in Liquid and Solid Metals(CRC Press)

[62] Eskin G I 1998 Ultrasonic Treatment of Light Alloy Melts(CRC Press)

[63] Cui Y, Xu C and Han Q 2007 Microstructure improvement in weld metal using ultrasonic vibrations Adv. Eng. Mater.9 161–3

[64] Yuan T, Kou S and Luo Z 2016 Grain refining by ultrasonic stirring of the weld pool Acta Mater. 106 144–54

[65] Ramirez A, Qian M, Davis B, Wilks T and Stjohn D H 2008 Potency of high-intensity ultrasonic treatment for grain refinement of magnesium alloys Scr. Mater. 59 19–22

[66] Atamanenko T V, Eskin D G, Zhang L and Katgerman L 2010 Criteria of grain refinement induced by ultrasonic melt treatment of aluminum alloys containing Zr and Ti Metall. Mater. Trans. A 41 2056–66

[67] Gorunov A I 2020 Additive manufacturing of Ti6Al4V parts using ultrasonic assisted direct energy deposition J.Manuf. Process. 59 545–56

[68] Wu D J, Song C C, Di T D, Niu F Y and Ma G Y 2022 Intermetallic regulation mechanism of Inconel 718/Ti6Al4V composite by novel follow-up ultrasonic assisted laser additive manufacturing Composites B 235 109736

[69] Li C G, Sun S, Liu C M, Lu Q H, Ma P and Wang Y 2019 Microstructure and mechanical properties of TiC/AlSi10Mg alloy fabricated by laser additive manufacturing under high-frequency micro-vibration J.Alloys Compd. 794 236–46

[70] ASM Handbook Committee 1990 Properties and Selection: Nonferrous Alloys and Special-purpose Materials 10th edn (ASM International, Materials Park)

[71] Rosenberg Z and Meybar Y 1983 Determination of changes in the sound velocity in shock loaded Ti-6Al-4V with in-material manganin gauges J. Phys. D: Appl. Phys.16 L193–4

[72] Farhang B, Tanrikulu A A, Ganesh-Ram A, Jain A and Amerinatanzi A 2023 Electromagnetic field-assisted laser welding of NiTi to stainless steel: towards a lightweight,high-strength joint with preserved properties J. Mater.Process. Technol. 314 117888

[73] Shao Z W, Le Q C, Zhang Z Q and Cui J Z 2011 A new method of semi-continuous casting of AZ80 Mg alloy billets by a combination of electromagnetic and ultrasonic fields Mater. Des. 32 4216–24

[74] Zhang N, Liu W W, Deng D W, Tang Z J, Liu X Y, Yan Z R and Zhang H C 2018 Effect of electric-magnetic compound field on the pore distribution in laser cladding process Opt. Laser Technol. 108 247–54

[75] Liu X, Shuai S S, Huang C L, Wu S J, Hu T, Chen C Y,Wang J and Ren Z M 2022 Microstructure and mechanical properties of directionally solidified Al-rich Ni3Al-based alloy under static magnetic field J. Mater. Sci. Technol.110 117–27

[76] Wang R et al 2023 Laser additive manufacturing of strong and ductile Al-12Si alloy under static magnetic field J.Mater. Sci. Technol. 163 101–12

[77] Cao J W, Shuai S S, Huang C L, Hu T, Chen C Y, Wang J and Ren Z M 2022 4D synchrotron x-ray tomographic study of the influence of transverse magnetic field on iron intermetallic compounds precipitation behavior during solidification of Al–Si–Fe alloy Intermetallics 143 107471

[78] Tao Y T, Yeckel A and Derby J J 2016 Steady-state and dynamic models for particle engulfment during solidification J. Comput. Phys. 315 238–63

[79] Yang Z X, Wang A H, Weng Z K, Xiong D H, Ye B and Qi X Y 2017 Porosity elimination and heat treatment of diode laser-clad homogeneous coating on cast aluminum-copper alloy Surf. Coat. Technol. 321 26–35

[80] Leenov D and Kolin A 1954 Theory of electromagnetophoresis. I. Magnetohydrodynamic forces experienced by spherical and symmetrically oriented cylindrical particles J. Chem. Phys. 22 683–8

[81] Liu Y and Li Y X 2003 Theoretical analysis of bubble nucleation in GASAR materials Trans. Nonferrous Met.Soc. 13 830–4

[82] Sun Q S, Xue Z X, Chen Y, Xia R D, Wang J M, Xu S,Zhang J and Yue Y N 2022 Modulation of the thermal transport of micro-structured materials from 3D printing Int. J. Extrem. Manuf. 4 015001

[83] Seidel A, Finaske T, Straubel A, Wendrock H, Maiwald T,Riede M, Lopez E, Brueckner F and Leyens C 2018 Additive manufacturing of powdery Ni-based superalloys Mar-M-247 and CM 247 LC in hybrid laser metal deposition Metall. Mater. Trans. A 49 3812–30

[84] Yang W J, Mochizuki S and Nishiwaki N 1994 Melting and solidification Transport Phenomena in Manufacturing and Materials Processing ed W J Yang, S Mochizuki and N Nishiwaki (Elsevier) pp 117–35

[85] Pero-Sanz Elorz J A, Quintana Hernández M J and Verdeja González L F 2017 Phase transformation kinetics Solidification and Solid-State Transformations of Metals and Alloys ed J A Pero-Sanz Elorz, M J Quintana Hernández and L F Verdeja González (Elsevier) pp 31–65

[86] Bailey N 1994 Solidification Cracking. In Weldability of Ferritic Steels ed N Bailey (Woodhead Publishing) pp54–101

[87] Pardal G, Martina F and Williams S 2019 Laser stabilization of GMAW additive manufacturing of Ti-6Al-4V components J. Mater. Process. Technol. 272 1–8

[88] Sui S, Chew Y, Weng F, Tan C L, Du Z L and Bi G J 2022 Study of the intrinsic mechanisms of nickel additive for grain refinement and strength enhancement of laser aided additively manufactured Ti–6Al–4V Int. J. Extrem. Manuf.4 035102

[89] Vorontsov A, Zykova A, Chumaevskii A and Kolubaev E 2022 Outstanding features of high-speed hybrid laser-arc welding compared to high-speed laser welding of AA5059 aluminum alloys Vacuum 196 110736

[90] Kapil A, Suga T, Tanaka M and Sharma A 2022 Towards hybrid laser-arc based directed energy deposition: understanding bead formation through mathematical modeling for additive manufacturing J. Manuf. Process.76 457–74

[91] Gong M C, Meng Y F, Zhang S, Zhang Y Z, Zeng X Y and Gao M 2020 Laser-arc hybrid additive manufacturing of stainless steel with beam oscillation Addit. Manuf.33 101180

[92] Cai Y H, Luo Y, Zhang F Y, Peng Y R, Yang S Q and Tang F S 2023 Effect of pulsed laser energy on grain morphology and texture characteristics of stainless steel fabricated by laser-PTA additive manufacturing Opt. Laser Technol. 158 108799

[93] Ma G Y, Wang R Z, Liu D H, Wu S N, Niu F Y and Wu D J 2022 Laser-arc hybrid additive manufactured Al–Cu alloy for T-shaped structure: microstructure evaluation and molten pool behavior J. Manuf. Process. 79 442–59

[94] Tang J, Liu M C, Bo G W, Jiang F L, Luo C H, Teng J,Fu D F and Zhang H 2022 Unraveling precipitation evolution and strengthening function of the Al-Zn-Mg-Cu alloys with various Zn contents: multiple experiments and integrated internal-state-variable modeling J. Mater. Sci.Technol. 116 130–50

[95] Klassen A, Scharowsky T and K?rner C 2014 Evaporation model for beam based additive manufacturing using free surface lattice Boltzmann methods J. Phys. D: Appl. Phys.47 275303

[96] Gao Z G and Ojo O A 2012 Modeling analysis of hybrid laser-arc welding of single-crystal nickel-base superalloys Acta Mater. 60 3153–67

[97] Gao M, Mei S W, Wang Z N, Li X Y and Zeng X Y 2012 Process and joint characterizations of laser–MIG hybrid welding of AZ31 magnesium alloy J. Mater. Process.Technol. 212 1338–46

[98] Fan W, Tan H, Lin X and Huang W D 2020 Thermal analysis of synchronous induction-assisted laser deposition of Ti-6Al-4V using different laser-induction interaction modes Addit. Manuf. 35 101267

[99] Liu M R, Ma G Y, Liu D H, Yu J L, Niu F Y and Wu D J 2020 Microstructure and mechanical properties of aluminum alloy prepared by laser-arc hybrid additive manufacturing J. Laser Appl. 32 022052

[100] Ma G Y, Wu S N, Wang R Z, Liu D H, Niu F Y, Bi G J and Wu D J 2022 Microstructure evaluation and resultant mechanical properties of laser-arc hybrid additive manufactured Cu-Cr-Zr alloy J. Alloys Compd.912 165044

[101] Ma S et al 2022 Macro/micro-structure and mechanical properties of Al-6Mg-0.3Sc alloy fabricated by oscillating laser-arc hybrid additive manufacturing J. Alloys Compd. 929 167325

[102] Gong M C, Zhang S, Lu Y, Wang D Z and Gao M 2021 Effects of laser power on texture evolution and mechanical properties of laser-arc hybrid additive manufacturing Addit. Manuf. 46 102201

[103] Miao Q Y, Wu D J, Chai D S, Zhan Y, Bi G J, Niu F Y and Ma G Y 2020 Comparative study of microstructure evaluation and mechanical properties of 4043 aluminum alloy fabricated by wire-based additive manufacturing Mater. Des. 186 108205

[104] Wang Y F, Chen X Z, Shen Q K, Su C C, Zhang Y P,Jayalakshmi S and Singh R A 2021 Effect of magnetic field on the microstructure and mechanical properties of Inconel 625 superalloy fabricated by wire arc additive manufacturing J. Manuf. Process. 64 10–19

[105] Huan P C, Wei X, Wang X N, Di H S, Chen Y, Zhang Q Y,Chen X M and Shen X J 2022 Comparative study on the microstructure, mechanical properties and fracture mechanism of wire arc additive manufactured Inconel 718 alloy under the assistance of alternating magnetic field Mater. Sci. Eng. A 854 143845

[106] Chen Y H, Xu M F, Zhang T M, Xie J L, Wei K, Wang S L,Yin L M and He P 2022 Grain refinement and mechanical properties improvement of Inconel 625 alloy fabricated by ultrasonic-assisted wire and arc additive manufacturing J.Alloys Compd. 910 164957

[107] Ning F D, Jiang D Y, Liu Z C, Wang H and Cong W L 2021 Ultrasonic frequency effects on the melt pool formation, porosity, and thermal-dependent property of Inconel 718 fabricated by ultrasonic vibration-assisted directed energy deposition J. Manuf. Sci. Eng. 143 051009

[108] Yang Z C, Wang S H, Zhu L D, Ning J S, Xin B, Dun Y and Yan W T 2022 Manipulating molten pool dynamics during metal 3D printing by ultrasound Appl. Phys. Rev. 9 021416

[109] Filimonov A M, Rogozin O A, Dubinin O N, Kuzminova Y O, Shibalova A A, Okulov I V, Akhatov I S and Evlashin S A 2021 Modification of mechanical properties in directed energy deposition by a static magnetic field: experimental and theoretical analysis Materials 14 5190

[110] Wu D J, Liu D H, Niu F Y, Miao Q Y, Zhao K, Tang B K,Bi G J and Ma G Y 2020 Al–Cu alloy fabricated by novel laser-tungsten inert gas hybrid additive manufacturing Addit. Manuf. 32 100954

[111] Donoghue J, Davis A E Daniel C S, Garner A, Martina F,Quinta da Fonseca J and Prangnell P B 2020 On the observation of annealing twins during simulating β-grain refinement in Ti–6Al–4V high deposition rate AM with in-process deformation Acta Mater. 186 229–41

[112] Donoghue J, Antonysamy A A, Martina F, Colegrove P A,Williams S W and Prangnell P B 2016 The effectiveness of combining rolling deformation with wire–arc additive manufacture on β-grain refinement and texture modification in Ti–6Al–4V Mater. Charact. 114 103–14

[113] McAndrew A R et al 2018 Interpass rolling of Ti-6Al-4V wire+arc additively manufactured features for microstructural refinement Addit. Manuf. 21 340–9

[114] Marinelli G, Martina F, Ganguly S and Williams S 2020 Grain refinement in an unalloyed tantalum structure by combining Wire+Arc additive manufacturing and vertical cold rolling Addit. Manuf. 32 101009

[115] Xie C, Wu S C, Yu Y K, Zhang H O, Hu Y N, Zhang M B and Wang G L 2021 Defect-correlated fatigue resistance of additively manufactured Al-Mg4.5Mn alloy with in situ micro-rolling J. Mater. Process. Technol. 291 117039

[116] Fang X W, Zhang L J, Chen G P, Huang K, Xue F, Wang L,Zhao J Y and Lu B H 2021 Microstructure evolution of wire-arc additively manufactured 2319 aluminum alloy with interlayer hammering Mater. Sci. Eng. A 800 140168

[117] Wang Y C and Shi J 2020 Recrystallization behavior and tensile properties of laser metal deposited Inconel 718 upon in-situ ultrasonic impact peening and heat treatment Mater. Sci. Eng. A 786 139434

[118] Kalentics N, de Seijas M O V, Griffiths S, Leinenbach C and Logé R E 2020 3D laser shock peening—A new method for improving fatigue properties of selective laser melted parts Addit. Manuf. 33 101112

[119] Lu J Z, Lu H F, Xu X, Yao J H, Cai J and Luo K Y 2020 High-performance integrated additive manufacturing with laser shock peening–induced microstructural evolution and improvement in mechanical properties of Ti6Al4V alloy components Int. J. Mach. Tools Manuf. 148 103475

[120] Zhang H O, Wang X P, Wang G L and Zhang Y 2013 Hybrid direct manufacturing method of metallic parts using deposition and micro continuous rolling Rapid Prototyp. J.19 387–94

[121] Zhang H O, Wang R, Liang L Y and Wang G L 2016 HDMR technology for the aircraft metal part Rapid Prototyp. J.22 857–63

[122] Zhang X Y, Huang S, Li D C, Geng J L, Yang F and Li Q Y 2022 An approach to improve the microstructure and mechanical properties: a hybrid manufacturing of laser directed energy deposition and shot peening Addit. Manuf.55 102686

[123] Kalentics N, Boillat E, Peyre P, Gorny C, Kenel C,Leinenbach C, Jhabvala J and Logé R E 2017 3D laser shock peening—a new method for the 3D control of residual stresses in selective laser melting Mater. Des.130 350–6

[124] Gale J and Achuhan A 2017 Application of ultrasonic peening during DMLS production of 316 l stainless steel and its effect on material behavior Rapid Prototyp. J.23 1185–94

[125] Ye H, Ye K, Guo B G, Le F B, Wei C, Sun X, Wang G Y and Liu Y 2020 Effects of combining ultrasonic micro-forging treatment with laser metal wire deposition on microstructural and mechanical properties in Ti–6Al–4V alloy Mater. Charact. 162 110187

[126] Wei J X, He C S, Qie M, Li Y, Zhao Y, Qin G W and Zuo L 2022 Microstructure refinement and mechanical properties enhancement of wire-arc additive manufactured 2219 aluminum alloy assisted by interlayer friction stir processing Vacuum 203 111264

[127] Humphreys F J and Hatherly M 2004 Continuous recrystallization during and after large strain deformation Recrystallization and Related Annealing Phenomena 2nd edn, ed F J Humphreys and M Hatherly (Elsevier) pp 451–67

[128] Rao K P 1993 Flow stress relationships for the cold and hot deformation of an A1-4Mg alloy for use in process modelling Advances in Engineering Plasticity and Its Applications ed W B Lee (Elsevier) pp 243–50

[129] Hansen N and Barlow C Y 2014 Plastic deformation of metals and alloys Physical Metallurgy 5th edn, ed D E Laughlin and K Hono (Elsevier) pp 1681–764

[130] Sealy M P, Hadidi H, Kanger C J, Yan X L, Cui B and McGeough J A 2019 Glocal integrity in 420 stainless steel by asynchronous laser processing CIRP Ann. 68 189–92

[131] Yuan D, Sun X J, Sun L B, Zhang Z C, Guo C H, Wang J D and Jiang F C 2021 Improvement of the grain structure and mechanical properties of austenitic stainless steel fabricated by laser and wire additive manufacturing assisted with ultrasonic vibration Mater. Sci. Eng. A 813 141177

[132] He C S, Wei J X, Li Y, Zhang Z Q, Tian N, Qin G W and Zuo L 2023 Improvement of microstructure and fatigue performance of wire-arc additive manufactured 4043 aluminum alloy assisted by interlayer friction stir processing J. Mater. Sci. Technol. 133 183–94

[133] Lu H F, Wu L J, Wei H L, Cai J, Luo K Y, Xu X and Lu J Z 2022 Microstructural evolution and tensile property enhancement of remanufactured Ti6Al4V using hybrid manufacturing of laser directed energy deposition with laser shock peening Addit. Manuf. 55 102877

[134] Gu J L, Yang S L, Gao M J, Bai J, Zhai Y C and Ding J L 2020 Micropore evolution in additively manufactured aluminum alloys under heat treatment and inter-layer rolling Mater. Des. 186 108288

[135] Avegnon K L M, Noll P, Uddin M R, Madireddy G, Williams R E, Achuthan A and Sealy M P 2021 Use of energy consumption during milling to fill a measurement gap in hybrid additive manufacturing Addit. Manuf.46 102167

[136] Chen W, Xu L Y, Zhao L, Han Y D, Wang X, Hu C C and Jing H Y 2022 Application of hybrid additive manufacturing technology for performance improvement of martensitic stainless steel Addit. Manuf. 51 102648

[137] Zhang H O and Wang G L 2012 Fusion forming composite manufacturing method and its auxiliary device of parts and moulds CN Patent No. 101817121B

[138] Martina F, Williams S W and Colegrove P A 2014 Improved microstructure and increased mechanical properties of additive manufacture produced Ti-6Al-4V by interpass cold rolling Proc. 24th Int. Solid Freeform Fabrication Symp. (Austin, TX, USA) pp 490–6

[139] Tian X N, Zhu Y M, Lim C V S, Williams J, Boyer R, Wu X H, Zhang K and Huang A J 2021 Isotropic and improved tensile properties of Ti-6Al-4V achieved by in-situ rolling in direct energy deposition Addit. Manuf.46 102151

[140] Wang Y C and Shi J 2019 Microstructure and properties of Inconel 718 fabricated by directed energy deposition with in-situ ultrasonic impact peening Metall. Mater. Trans. B 50 2815–27

[141] H?nnige J R, Colegrove P and Williams S 2017 Improvement of microstructure and mechanical properties in wire + arc additively manufactured Ti-6Al-4V with machine hammer peening Proc. Eng. 216 8–17

[142] Morgano M, Kalentics N, Carminati C, Capek J, Makowska M, Woracek R, Maimaitiyili T, Shinohara T, Loge R and Strobl M 2020 Investigation of the effect of laser shock peening in additively manufactured samples through Bragg edge neutron imaging Addit. Manuf.34 101201

[143] Amini A, Asadi P and Zolghadr P 2014 Friction stir welding applications in industry Advances in Friction-Stir Welding and Processing ed M K B Givi and P Asadi (Woodhead Publishing) pp 671–722

[144] Heidarzadeh A et al 2021 Friction stir welding/processing of metals and alloys: a comprehensive review on microstructural evolution Prog. Mater. Sci. 117 100752

[145] H?nnige J R, Colegrove P A, Ahmad B, Fitzpatrick M E,Ganguly S, Lee T L and Williams S W 2018 Residual stress and texture control in Ti-6Al-4V wire+arc additively manufactured intersections by stress relief and rolling Mater. Des. 150 193–205

[146] Zhang M X, Liu C M, Shi X Z, Chen X P, Chen C, Zuo J H,Lu J P and Ma S Y 2016 Residual stress, defects and grain morphology of Ti-6Al-4V alloy produced by ultrasonic impact treatment assisted selective laser melting Appl. Sci.6 304

[147] Yang Y C, Jin X, Liu C M, Xiao M Z, Lu J P, Fan H L and Ma S Y 2018 Residual stress, mechanical properties, and grain morphology of Ti-6Al-4V alloy produced by ultrasonic impact treatment assisted wire and arc additive manufacturing Metals 8 934

[148] Lu H F, Deng W W, Luo K Y, Chen Y H, Wang J and Lu J Z 2023 Tailoring microstructure of additively manufactured Ti6Al4V titanium alloy using hybrid additive manufacturing technology Addit. Manuf. 63 103416

[149] Kalentics N, Burn A, Cloots M and Logé R E 2019 3D laser shock peening as a way to improve geometrical accuracy in selective laser melting Int. J. Adv. Manuf. Technol.101 1247–54

[150] Kalentics N, Sohrabi N, Tabasi H G, Griffiths S, Jhabvala J,Leinenbach C, Burn A and Logé R E 2019 Healing cracks in selective laser melting by 3D laser shock peening Addit.Manuf. 30 100881

[151] Madireddy G, Li C, Liu J F and Sealy M P 2019 Modeling thermal and mechanical cancellation of residual stress from hybrid additive manufacturing by laser peening Nanotechnol. Precis. Eng. 2 49–60

[152] He C S, Li Y, Wei J X, Zhang Z Q, Tian N, Qin G W and Zhao X 2022 Enhancing the mechanical performance of Al–Zn–Mg alloy builds fabricated via underwater friction stir additive manufacturing and post-processing aging J. Mater. Sci. Technol. 108 26–36

[153] Imam M, Chittajallu S N S H, Gururani H, Yamamoto H,Ito K, Parchuri P K, Mishra R, Sharma A, Richhariya A and Chinthapenta V 2022 Experimental study on improving the additively manufactured GMAW and TIG beads using FSP Mater. Today Proc. 56 690–705

[154] Kalentics N, Huang K, Ortega Varela de Seijas M, Burn A,Romano V and Logé R E 2019 Laser shock peening: a promising tool for tailoring metallic microstructures in selective laser melting J. Mater. Process. Technol.266 612–8

[155] Madireddy G, Liu J F and Sealy M P 2020 Distortion mitigation in additive manufacturing of AlSi10Mg by multilayer laser peening Proc. CIRP 95 133–7

[156] Hadidi H, Mailand B, Sundermann T, Johnson E,Madireddy G, Negahban M, Delbreilh L and Sealy M 2019 Low velocity impact of ABS after shot peening predefined layers during additive manufacturing Proc.Manuf. 34 594–602

[157] Gou J, Wang Z J, Hu S S, Shen J Q, Tian Y B, Zhao G C and Chen Y Q 2020 Effects of ultrasonic peening treatment in three directions on grain refinement and anisotropy of cold metal transfer additive manufactured Ti-6Al-4V thin wall structure J. Manuf. Process. 54 148–57

[158] Cheng K, Xi M Z, Cui J J and Cai C 2022 Effects of press down volumes on the microstructure and mechanical properties of hybrid in situ point-mode forging and laser additive manufactured Ti-6Al-4V Mater. Lett.320 132332

[159] Colegrove P A, Donoghue J, Martina F, Gu J L, Prangnell P and H?nnige J 2017 Application of bulk deformation methods for microstructural and material property improvement and residual stress and distortion control in additively manufactured components Scr. Mater.135 111–8

[160] Duarte V R, Rodrigues T A, Schell N, Miranda R M,Oliveira J P and Santos T G 2020 Hot forging wire and arc additive manufacturing (HF-WAAM) Addit. Manuf.35 101193

[161] Gao Y F, Wu C D, Peng K, Song X L, Fu Y H, Chen Q Y,Zhang M B, Wang G L and Liu J 2021 Towards superior fatigue crack growth resistance of TC4-DT alloy by in-situ rolled wire-arc additive manufacturing J. Mater. Res. Technol. 15 1395–407

[162] He C S, Wang T, Zhang Z Q and Qiu C P 2022 Coupling effect of axial ultrasonic vibration and tool thread on the microstructure and properties of the friction stir lap welding joint of Al/Mg dissimilar alloys J. Manuf.Process. 80 95–107

[163] Wei J X, He C S, Qie M, Li Y, Tian N, Qin G W and Zuo L 2023 Achieving high performance of wire arc additive manufactured Mg–Y–Nd alloy assisted by interlayer friction stir processing J. Mater. Process. Technol.311 117809

[164] Ding K and Ye L 2006 Physical and mechanical mechanisms of laser shock peening Laser Shock Peening ed K Ding and L Ye (Woodhead Publishing) pp 7–46

[165] Ding K and Ye L 2006 Simulation of laser shock peening on a curved surface Laser Shock Peening ed K Ding and Y L(Woodhead Publishing) pp 133–50

[166] Ding K and Ye L 2006 Three-dimensional simulation of single and multiple laser shock peening Laser Shock Peening ed K Ding and Y L (Woodhead Publishing) pp100–18

[167] Zhang S J, Zhou Y P, Zhang H J, Xiong Z W and To S 2019 Advances in ultra-precision machining of micro-structured functional surfaces and their typical applications Int. J.Mach. Tools Manuf. 142 16–41

[168] Rashid A and Jahan M P 2021 Microfabrication by electrical discharge machining-based hybrid processes Micro Electro-Fabrication ed T Saleh, M S M Ali and Takahata K) (Elsevier) pp 33–62

[169] Ohmori H and Takahashi I 1994 Efficient grinding technique utilizing electrolytic in-process dressing for precision machining of hard materials Advancement of Intelligent Production ed E Usui (Elsevier) pp 315–20

[170] Kumar S, Wu C S, Padhy G K and Ding W 2017 Application of ultrasonic vibrations in welding and metal processing: a status review J. Manuf. Process. 26 295–322

[171] Averback R S, Ghaly M and Bellon P 1996 Interfacial effects during ion beam processing of metals C,H,N and O in Si and Characterization and Simulation of Materials and Processes ed A Borghesi, U M G?sele, J Vanhellemont,M Djafari-Rouhani and A M Gué (Elsevier) pp 38–48

[172] Biesuz M, Saunders T, Ke D Y, Reece M J, Hu C and Grasso S 2021 A review of electromagnetic processing of materials (EPM): heating, sintering, joining and forming J.Mater. Sci. Technol. 69 239–72

[173] Kalentics N, Boillat E, Peyre P, ′Ciri′c-Kosti′c S, Bogojevi′c N and Logé R E 2017 Tailoring residual stress profile of selective laser melted parts by laser shock peening Addit.Manuf. 16 90–97

[174] Lan L, Xin R Y, Jin X Y, Gao S, He B, Rong Y H and Min N 2020 Effects of laser shock peening on microstructure and properties of Ti-6Al-4V titanium alloy fabricated via selective laser melting Materials 13 3261

[175] Beynon J H and Sellars C M 1992 Modelling microstructure and its effects during multipass hot rolling ISIJ Int.32 359–67

[176] Yu H L and Cui X H 2022 Rolling forming of multi-scaled metallic foils and sheets Encycl. Mater. Met. Alloys4 160–81

[177] Straffelini G 2023 Rolling. In Ductility and Formability of Metals ed G Straffelini (Academic) pp 325–48

[178] Davis A E Kennedy J R, Ding J and Prangnell P B 2020 The effect of processing parameters on rapid-heating β recrystallization in inter-pass deformed Ti-6Al-4V wire-arc additive manufacturing Mater. Charact.163 110298

[179] Rhodes C G and Paton N E 1979 Formation characteristics of the α/β interface phase in Ti-6Ai-4V Metall. Trans. A10 209–16

[180] Rhodes C G and Williams J C 1975 Observations of an interface phase in the α/β boundaries in titanium alloys Metall. Trans. A 6 1670–1

[181] Mostafaei A et al 2022 Defects and anomalies in powder bed fusion metal additive manufacturing Curr. Opin. Solid State Mater. Sci. 26 100974

[182] Bandyopadhyay A, Mitra I, Avila J D, Upadhyayula M and Bose S 2023 Porous metal implants: processing, properties, and challenges Int. J. Extrem. Manuf. 5 032014

[183] Bellini C, Berto F, Cocco V D, Iacoviello F, Mocanu L P and Razavi N 2021 Additive manufacturing processes for metals and effects of defects on mechanical strength: a review Proc. Struct. Integr. 33 498–508

[184] Tomar B, Shiva S and Nath T 2022 A review on wire arc additive manufacturing: processing parameters, defects,quality improvement and recent advances Mater. Today Commun. 31 103739

[185] Lobanov L M and Garf E F 1998 Estimation of life of metal tubular structure connections at ultrasonic peening treatment of welded joint zone J. Constr. Steel Res.46 431–2

[186] Chen Y, Liu F L, He C, Li L, Wang C, Liu Y J and Wang Q Y 2022 Effect of ultrasonic peening treatment on the fatigue behaviors of a magnesium alloy up to very high cycle regime J. Magnes. Alloys 10 614–26

[187] Gupta K, Jain N K and Laubscher R 2017 Surface property enhancement of gears Advanced Gear Manufacturing and Finishing ed K Gupta, N K Jain and R Laubscher(Academic) pp 167–96

[188] Zhang H, Chiang R, Qin H F, Ren Z C, Hou X N, Lin D,Doll G L, Vasudevan V K, Dong Y L and Ye C 2017 The effects of ultrasonic nanocrystal surface modification on the fatigue performance of 3D-printed Ti64 Int. J. Fatigue103 136–46

[189] Zhang H, Zhao J Y, Liu J, Qin H F, Ren Z C, Doll G L,Dong Y L and Ye C 2018 The effects of electrically-assisted ultrasonic nanocrystal surface modification on 3D-printed Ti-6Al-4V alloy Addit. Manuf.22 60–68

[190] Xing X D, Duan X M, Sun X J, Gong H J, Wang L Q and Jiang F C 2019 Modification of residual stresses in laser additive manufactured AlSi10Mg specimens using an ultrasonic peening technique Materials 12 455

[191] Zhang D Z, Li Y Z, Wang H and Cong W L 2020 Ultrasonic vibration-assisted laser directed energy deposition in-situ synthesis of NiTi alloys: effects on microstructure and mechanical properties J. Manuf. Process. 60 328–39

[192] Li Q Q, Zhang Y, Chen J, Guo B G, Wang W C, Jing Y H and Liu Y 2021 Effect of ultrasonic micro-forging treatment on microstructure and mechanical properties of GH3039 superalloy processed by directed energy deposition J. Mater. Sci. Technol. 70 185–96

[193] Diao M X, Guo C H, Sun Q F, Jiang F C, Li L Y, Li J F,Xu D, Liu C M and Song H L 2022 Improving mechanical properties of austenitic stainless steel by the grain refinement in wire and arc additive manufacturing assisted with ultrasonic impact treatment Mater. Sci. Eng. A 857 144044

[194] Lv J M, Alexandrov I V, Luo K Y, Lu H F and Lu J Z 2022 Microstructural evolution and anisotropic regulation in tensile property of cold metal transfer additive manufactured Ti6Al4V alloys via ultrasonic impact treatment Mater. Sci. Eng. A 859 144177

[195] Shahriari A, Ghaffari M, Khaksar L, Nasiri A,Hadadzadeh A, Amirkhiz B S and Mohammadi M 2021 Corrosion resistance of 13wt.% Cr martensitic stainless steels: additively manufactured CX versus wrought Ni-containing AISI 420 Corros. Sci. 184 109362

[196] Lv J L and Luo H Y 2013 Comparison of corrosion properties of passive films formed on phase reversion induced nano/ultrafine-grained 321 stainless steel Appl.Surf. Sci. 280 124–31

[197] Lu S Y, Yao K F, Chen Y B, Wang M H, Liu X and Ge X Y 2015 The effect of tempering temperature on the microstructure and electrochemical properties of a 13 wt.% Cr-type martensitic stainless steel Electrochim. Acta 165 45–55

[198] Lambiase F, Balle F, Blaga L A, Liu F C and Amancio-Filho S T 2021 Friction-based processes for hybrid multi-material joining Compos. Struct. 266 113828

[199] Mironov S, Sato Y S and Kokawa H 2009 Development of grain structure during friction stir welding of pure titanium Acta Mater. 57 4519–28

[200] Ratkovi′c N, Arsi′c D, Lazi′c V, Nikoli′c R R and Hadzima B 2016 Micro-structure in the joint friction plane in friction welding of dissimilar steels Proc. Eng. 149 414–20

[201] Mishra R S, Mahoney M W, McFadden S X, Mara N A and Mukherjee A K 1999 High strain rate superplasticity in a friction stir processed 7075 Al alloy Scr. Mater. 42 163–8

[202] Ma Z Y, Mishra R S, Mahoney M W and Grimes R 2003 High strain rate superplasticity in friction stir processed Al–Mg–Zr alloy Mater. Sci. Eng. A 351 148–53

[203] Santos Macías J G, Elangeswaran C, Zhao L, Van Hooreweder B, Adrien J, Maire E, Buffière J Y, Ludwig W, Jacques P J and Simar A 2019 Ductilisation and fatigue life enhancement of selective laser melted AlSi10Mg by friction stir processing Scr. Mater. 170 124–8

[204] Wei J X, He C S, Zhao Y, Qie M, Qin G W and Zuo L 2023 Evolution of microstructure and properties in 2219 aluminum alloy produced by wire arc additive manufacturing assisted by interlayer friction stir processing Mater. Sci. Eng. A 868 144794

[205] Feng A H and Ma Z Y 2007 Enhanced mechanical properties of Mg–Al–Zn cast alloy via friction stir processing Scr.Mater. 56 397–400

[206] Zhou Y H, Lin X, Kang N, Huang W D and Wang Z N 2021 Mechanical properties and precipitation behavior of the heat-treated wire + arc additively manufactured 2219 aluminum alloy Mater. Charact. 171 110735

[207] Li Q, Wu A P, Li Y J, Wang G Q, Yan D Y and Liu J 2015 Influence of temperature cycles on the microstructures and mechanical properties of the partially melted zone in the fusion welded joints of 2219 aluminum alloy Mater. Sci.Eng. A 623 38–48

[208] Wan Z D, Wang Q, Zhao Y, Zhao T Y, Shan J G, Meng D Y,Song J L, Wu A P and Wang G Q 2022 Improvement in tensile properties of 2219-T8 aluminum alloy TIG welding joint by PMZ local properties and stress distribution Mater. Sci. Eng. A 839 142863

[209] Sharma S R, Ma Z Y and Mishra R S 2004 Effect of friction stir processing on fatigue behavior of A356 alloy Scr.Mater. 51 237–41

[210] Tan C L et al 2023 Review on field assisted metal additive manufacturing Int. J. Mach. Tools Manuf. 189 104032

[211] Guo W, Sun R J, Song B W, Zhu Y, Li F, Che Z G, Li B, Guo C, Liu L and Peng P 2018 Laser shock peening of laser additive manufactured Ti6Al4V titanium alloy Surf.Coat. Technol. 349 503–10

[212] Jiang Q H, Li S, Zhou C, Zhang B and Zhang Y K 2021 Effects of laser shock peening on the ultra-high cycle fatigue performance of additively manufactured Ti6Al4V alloy Opt. Laser Technol. 144 107391

[213] Ji F F, Deng W W, Lu H F, Wu L J, Luo K Y and Lu J Z 2022 Laser shock peening-induced misfit dislocation at interfaces between HCP and BCC crystals of Ti6Al4V alloy and the corresponding dislocation patterns in two phases Surf. Coat. Technol. 440 128513

[214] Xu X F, Ganguly S, Ding J L, Seow C E and Williams S 2018 Enhancing mechanical properties of wire+arc additively manufactured INCONEL 718 superalloy through in-process thermomechanical processing Mater. Des.160 1042–51

[215] Liu Z Q, Gao C F, Liu X, Liu R P and Xiao Z Y 2021 Improved surface integrity of Ti6Al4V fabricated by selective electron beam melting using ultrasonic surface rolling processing J. Mater. Process. Technol.297 117264

[216] Li B, Shen Y F, Luo L, Hu W Y and Zhang Z H 2013 Surface aluminizing on Ti–6Al–4V alloy via a novel multi-pass friction-stir lap welding method: preparation process, oxidation behavior and interlayer evolution Mater. Des.49 647–56

[217] Singh A K, Ratrey P, Astarita A, Franchitti S, Mishra A and Arora A 2021 Enhanced cytocompatibility and mechanical properties of electron beam melted Ti-6Al-4V by friction stir processing J. Manuf. Process. 72 400–10

[218] Mironov S, Sato Y S and Kokawa H 2018 Friction-stir welding and processing of Ti-6Al-4V titanium alloy: a review J. Mater. Sci. Technol. 34 58–72

[219] Sun L B, Guo C H, Huang L J, Jiang F C, Xu K and Huang R S 2022 Effect and mechanism of inter-layer ultrasonic impact strengthening on the anisotropy of low carbon steel components fabricated by wire and arc additive manufacturing Mater. Sci. Eng. A 848 143382

[220] Lu H F, Xue K N, Xu X, Luo K Y, Xing F, Yao J H and Lu J Z 2021 Effects of laser shock peening on microstructural evolution and wear property of laser hybrid remanufactured Ni25/Fe104 coating on H13 tool steel J. Mater. Process. Technol. 291 117016

[221] Zhou S Y, Wang J Y, Yang G, Wu B, Xie H, Wu K and An D 2022 Periodic microstructure of Al–Mg alloy fabricated by inter-layer hammering hybrid wire arc additive manufacturing: formation mechanism, microstructural and mechanical characterization Mater. Sci. Eng. A 860 144314

[222] Wu D J, Yu C S, Wang Q Y, Niu F Y, Ma G Y, Wang H,Zhou C and Zhang B 2022 Synchronous-hammer-forging-assisted laser directed energy deposition additive manufacturing of high-performance 316L samples J. Mater. Process.Technol. 307 117695

[223] Xu X F, Ganguly S, Ding J L, Dirisu P, Martina F, Liu X W and Williams S W 2019 Improving mechanical properties of wire plus arc additively manufactured maraging steel through plastic deformation enhanced aging response Mater. Sci. Eng. A 747 111–8

[224] Xiong X C, Qin X P, Hua L, Wan G, Hu Z Q and Ni M 2022 Microstructure evolution and parameters optimization of follow-up hammering-assisted hybrid wire arc additive manufacturing J. Manuf. Process. 84 681–96

[225] Zhang T, Li H G, Gong H, Ding J L, Wu Y X, Diao C L,Zhang X Y and Williams S 2022 Hybrid wire—arc additive manufacture and effect of rolling process on microstructure and tensile properties of Inconel 718 J.Mater. Process. Technol. 299 117361

[226] Wang C R, Li Y P, Tian W, Hu J S, Li B, Li P C and Liao W H 2022 Influence of ultrasonic impact treatment and working current on microstructure and mechanical properties of 2219 aluminium alloy wire arc additive manufacturing parts J. Mater. Res. Technol. 21 781–97

[227] Sealy M P, Madireddy G, Williams R E, Rao P and Toursangsaraki M 2018 Hybrid processes in additive manufacturing J. Manuf. Sci. Eng. 140 060801

[228] Urhal P, Weightman A, Diver C and Bartolo P 2019 Robot assisted additive manufacturing: a review Robot.Comput.-Integr. Manuf. 59 335–45

[229] Li R S, Wang G L, Ding Y Y, Tang S Y, Chen X, Dai F S,Wang R, Song H and Zhang H O 2020 Optimization of the geometry for the end lateral extension path strategy to fabricate intersections using laser and cold metal transfer hybrid additive manufacturing Addit. Manuf. 36 101546

[230] Liu F, Xie H M and He W 2023 Multi-field coupling fatigue behavior of laser additively manufactured metallic materials: a review J. Mater. Res. Technol. 22 2819–43

[231] Li X R, Bai D, Wang Y Q, Liu F D, Zhang H and Liu S Y 2020 High-nitrogen steel laser-arc hybrid welding in vibration condition Mater. Sci. Technol. 36 434–42

[232] Zhang G Q, Li X Z, Boca R, Newkirk J, Zhang B, Fuhlbrigge T A, Feng H K and Hunt N J 2014. Use of industrial robots in additive manufacturing—A survey and feasibility study Proceedings of the 41st International Symposium on Robotics (VDE) pp 1–6

[233] Gardner L 2023 Metal additive manufacturing in structural engineering—review, advances, opportunities and outlook Structures 47 2178–93

[234] He F Y, Yuan L, Mu H C, Ros M, Ding D H, Pan Z X and Li H J 2023 Research and application of artificial intelligence techniques for wire arc additive manufacturing: a state-of-the-art review Robot.Comput.-Integr. Manuf. 82 102525

[235] Kaji F, Jinoop A N, Zardoshtian A, Hallen P, Frikel G,Tang T Y, Zimny M and Toyserkani E 2023 Robotic laser directed energy deposition-based additive manufacturing of tubular components with variable overhang angles: adaptive trajectory planning and characterization Addit.Manuf. 61 103366

[236] Zhang B, Liu S Y and Shin Y C 2019 In-process monitoring of porosity during laser additive manufacturing process Addit. Manuf. 28 497–505

[237] Kawalkar R, Dubey H K and Lokhande S P 2022 A review for advancements in standardization for additive manufacturing Mater. Today Proc. 50 1983–90

[238] Simoes M, Harris J A, Ghouse S, Hooper P A and McShane G J 2022 Process parameter sensitivity of the energy absorbing properties of additively manufactured metallic cellular materials Mater. Des. 224 111398

[239] Wei C, Gu H, Gu Y C, Liu L C, Huang Y H, Cheng D X, Li Z Q and Li L 2022 Abnormal interfacial bonding mechanisms of multi-material additive-manufactured tungsten–stainless steel sandwich structure Int. J. Extrem.Manuf. 4 025002

[240] Gu D D, Shi X Y, Poprawe R, Bourell D L, Setchi R and Zhu J H 2021 Material-structure-performance integrated laser-metal additive manufacturing Science 372 eabg1487

[241] Korkmaz M E, Waqar S, Garcia-Collado A, Gupta M K and Krolczyk G M 2022 A technical overview of metallic parts in hybrid additive manufacturing industry J. Mater. Res.Technol. 18 384–95

[242] Tian X Y et al 2022 Roadmap for additive manufacturing:toward intellectualization and industrialization Chin. J.Mech. Eng. Addit. Manuf. Front. 1 100014

[243] Shah A 2022 Emerging trends in robotic aided additive manufacturing Mater. Today Proc. 62 7231–7

[244] Zahidin M R, Yusof F, Abdul Rashid S H, Mansor S, Raja S,Jamaludin M F, Manurung Y H P, Adenan M S and Syahriah Hussein N I 2023 Research challenges, quality control and monitoring strategy for wire arc additive manufacturing J. Mater. Res. Technol. 24 2769–94

[245] Luo M J, Li R D, Zheng D, Kang J T, Wu H T, Deng S H and Niu P D 2023 Formation mechanism of inherent spatial heterogeneity of microstructure and mechanical properties of NiTi SMA prepared by laser directed energy deposition Int. J. Extrem. Manuf. 5 035005

[246] Webster S, Lin H, Carter Iii F M, Ehmann K and Cao J 2021 Physical mechanisms in hybrid additive manufacturing: a process design framework J. Mater. Process. Technol.291 117048

[247] Alt?parmak S C, Yardley V A, Shi Z S and Lin J G 2021 Challenges in additive manufacturing of high-strength aluminium alloys and current developments in hybrid additive manufacturing Int. J. Lightweight Mater. Manuf.4 246–61

[248] Mojahed Yazdi R, Imani F and Yang H 2020 A hybrid deep learning model of process-build interactions in additive manufacturing J. Manuf. Syst. 57 460–8

[249] Motallebi R, Savaedi Z and Mirzadeh H 2022 Additive manufacturing—A review of hot deformation behavior and constitutive modeling of flow stress Curr. Opin. Solid State Mater. Sci. 26 100992

[250] Clare A T, Mishra R S, Merklein M, Tan H, Todd I,Chechik L, Li J and Bambach M 2022 Alloy design and adaptation for additive manufacture J. Mater. Process.Technol. 299 117358

[251] Tan C L et al 2023 Machine learning customized novel material for energy-efficient 4D printing Adv. Sci.10 2206607

[252] Kladovasilakis N, Charalampous P, Boumpakis A,Kontodina T, Tsongas K, Tzetzis D, Kostavelis I,Givissis P and Tzovaras D 2023 Development of biodegradable customized tibial scaffold with advanced architected materials utilizing additive manufacturing J.Mech. Behav. Biomed. Mater. 141 105796

[253] Yuan C, Wang F F, Rosen D W and Ge Q 2021 Voxel design of additively manufactured digital material with customized thermomechanical properties Mater. Des.197 109205

[254] Vyavahare S, Mahesh V, Mahesh V and Harursampath D 2023 Additively manufactured meta-biomaterials: a state-of-the-art review Compos. Struct. 305 116491

[255] Meiners F, Ihne J, Jürgens P, Hemes S, Mathes M, Sizova I,Bambach M, Hama-Saleh R and Weisheit A 2020 New hybrid manufacturing routes combining forging and additive manufacturing to efficiently produce high performance components from Ti-6Al-4V Proc. Manuf.47 261–7

[256] Panwisawas C, Tang Y T and Reed R C 2020 Metal 3D printing as a disruptive technology for superalloys Nat.Commun. 11 2327

[257] Shao C W, Li H Y, Zhu Y K, Li P, Yu H Y, Zhang Z F,Gleiter H, McDonald A and Hogan J 2023 Nano-additive manufacturing of multilevel strengthened aluminum matrix composites Int. J. Extrem. Manuf. 5 015102

[258] Garcia D, Wu Z L, Kim J Y, Yu H Z and Zhu Y H 2019 Heterogeneous materials design in additive manufacturing: model calibration and uncertainty-guided model selection Addit. Manuf. 27 61–71

[259] Tan C L, Liu Y C, Weng F, Ng F L, Su J L, Xu Z K,Ngai X D and Chew Y 2022 Additive manufacturing of voxelized heterostructured materials with hierarchical phases Addit. Manuf. 54 102775

[260] Monzón M D, Paz R and Bordón P 2023 Present and future of standardization of additive manufacturing in the medical field 3D Printing in Medicine 2nd edn, ed D M Kalaskar (Woodhead Publishing) pp 361–78

[261] Dharmadhikari S, Menon N and Basak A 2023 A reinforcement learning approach for process parameter optimization in additive manufacturing Addit. Manuf.71 103556

[262] Monzón M D, Ortega Z, Martínez A and Ortega F 2015 Standardization in additive manufacturing: activities carried out by international organizations and projects Int.J. Adv. Manuf. Technol. 76 1111–21

[263] Zhang Z D, Sun C S, Xu X K and Liu L M 2018 Surface quality and forming characteristics of thin-wall aluminium alloy parts manufactured by laser assisted MIG arc additive manufacturing Int. J. Lightweight Mater. Manuf.1 89–95

[264] Kao A, Gan T, Tonry C, Krastins I and Pericleous K 2020 Thermoelectric magnetohydrodynamic control of melt pool dynamics and microstructure evolution in additive manufacturing Phil. Trans. R. Soc. A 378 20190249

[265] Li Z X, Liu C M, Xu T Q, Ji L, Wang D H, Lu J P, Ma S Y and Fan H L 2019 Reducing arc heat input and obtaining equiaxed grains by hot-wire method during arc additive manufacturing titanium alloy Mater. Sci. Eng. A742 287–94

[266] N?sstr?m J, Brückner F and Kaplan A F H 2019 Measuring the effects of a laser beam on melt pool fluctuation in arc additive manufacturing Rapid Prototyp. J.25 488–95

[267] Zhang C, Gao M and Zeng X Y 2019 Workpiece vibration augmented wire arc additive manufacturing of high strength aluminum alloy J. Mater. Process. Technol.271 85–92

[268] Wang H, Hu Y B, Ning F D and Cong W L 2020 Ultrasonic vibration-assisted laser engineered net shaping of Inconel 718 parts: effects of ultrasonic frequency on microstructural and mechanical properties J. Mater.Process. Technol. 276 116395

[269] Nie J W, Chen C Y, Shuai S S, Liu X Q, Zhao R X, Wang J,Liao H L and Ren Z M 2020 Effect of static magnetic field on the evolution of residual stress and microstructure of laser remelted Inconel 718 superalloy J. Therm. Spray Technol. 29 1410–23

[270] Zhu L D, Yang Z C, Xin B, Wang S H, Meng G R, Ning J S and Xue P S 2021 Microstructure and mechanical properties of parts formed by ultrasonic vibration-assisted laser cladding of Inconel 718 Surf. Coat. Technol.410 126964

[271] Li R S, Wang G L, Zhao X S, Dai F S, Huang C, Zhang M B,Chen X, Song H and Zhang H O 2021 Effect of path strategy on residual stress and distortion in laser and cold metal transfer hybrid additive manufacturing Addit.Manuf. 46 102203

[272] Martina F, Colegrove P A, Williams S W and Meyer J 2015 Microstructure of interpass rolled wire + arc additive manufacturing Ti-6Al-4V components Metall. Mater.Trans. A 46 6103–18

[273] Donoghue J, Gholinia A, da Fonseca J Q and Prangnell P 2016 In-situ high temperature EBSD analysis of the effect of a deformation step on the alpha to beta transition in additive manufactured Ti-6Al-4V Proc. 13th World Conf. on Titanium ed V Venkatesh et al (Wiley) pp 1283–8

[274] Gu J L, Wang X S, Bai J, Ding J L, Williams S, Zhai Y C and Liu K 2018 Deformation microstructures and strengthening mechanisms for the wire+arc additively manufactured Al-Mg4.5Mn alloy with inter-layer rolling Mater. Sci. Eng. A 712 292–301

[275] Meyer D and Wielki N 2019 Internal reinforced domains by intermediate deep rolling in additive manufacturing CIRP Ann. 68 579–82

[276] Sealy M P, Karunakaran R, Ortgies S, Madireddy G,Malshe A P and Rajurkar K P 2021 Reducing corrosion of additive manufactured magnesium alloys by interlayer ultrasonic peening CIRP Ann. 70 179–82

[277] Kan W H, Jiang D R, Humbert M, Gao X, Bhatia V K,Proust G, Zhu Y M, Hodgson P and Huang A J 2022 Effect of in-situ layer-by-layer rolling on the microstructure, mechanical properties, and corrosion resistance of a directed energy deposited 316L stainless steel Addit. Manuf. 55 102863

[278] Zhou J T, Zhou X, Li H, Hu J W, Han X and Liu S 2022 In-situ laser shock peening for improved surface quality and mechanical properties of laser-directed energy-deposited AlSi10Mg alloy Addit. Manuf.60 103177

[279] Liu J, Zhao S S, Zhang X H, Lin X C and Hu Y W 2022 A laser-shock-enabled hybrid additive manufacturing strategy with molten pool modulation of Fe-based alloy J.Manuf. Process. 82 657–64

[280] Wang Z H, Gao Y F, Huang J L, Wu C D, Wang G L and Liu J 2022 Precipitation phenomena and strengthening mechanism of Al–Cu alloys deposited by in-situ rolled wire-arc additive manufacturing Mater. Sci. Eng. A 855 143770

[281] Wang F J, Wei J X, Wu G Y, Qie M and He C S 2023 Microstructural modification and enhanced mechanical properties of wire-arc additive manufactured 6061 aluminum alloy via interlayer friction stir processing Mater. Lett. 342 134312

[282] Qie M, Wei J X and He C S 2023 Microstructure evolution and mechanical properties of wire-arc additive manufactured Al–Zn–Mg–Cu alloy assisted by interlayer friction stir processing J. Mater. Res. Technol.24 2891–906