Abstract
1. Introduction
Intensity scintillation index (SI) is a key metric in the free-space optical communication that measures the statistical property of the fluctuations induced in the intensity distribution of an optical beam by atmospheric turbulence[1]. Reducing the intensity SI is an important task in free-space optical communication applications[2]. To date, different types of approaches have been proposed to restrict the intensity scintillation, such as by using a stochastic electromagnetic beam, a beams array, and a partially coherent beam, as well as with the aid of adaptive optics[3–7]. Among others, the vector beams with spatially nonuniform polarization states[8], such as the cylindrical vector beams and fully Poincaré beams, have been shown to be useful, i.e., it was demonstrated that a vector beam has a lower intensity SI than that of its scalar modes (the modes with spatially uniform polarization states)[9–11].
However, as far as we know, all the research has focused only on the intensity fluctuations. The polarization property of a vector beam fluctuates as well in the turbulence[12], although it was shown only recently that the degree of vectorness remains unchanged during the vector beam propagating through the atmospheric turbulence[13]. Thus, how to describe quantitatively the fluctuations of the polarization property of a vector beam in turbulence becomes important, e.g., in free-space optical communications with the aid of vector beams[14–16].
For a fully polarized light, the polarization property can be described by the Jones vector. However, when a fully polarized beam propagates through a turbulent atmosphere, the beam becomes partially polarized due to the depolarization effect of the turbulence[17]. The Stokes parameters are widely used to describe the polarization properties of the partially coherent beams[18,19], including the polarization state of their fully polarized parts and the degree of polarization. In addition, the Stokes parameters are the real-valued quantities that can be obtained directly from several intensity measurements. Therefore, the fluctuations in the polarization property of a vector beam can be studied by measuring the statistical properties in the Stokes parameters.
Sign up for Chinese Optics Letters TOC. Get the latest issue of Chinese Optics Letters delivered right to you!Sign up now
To this end, in this work, we extend the intensity SI into four generalized Stokes SIs that describe the statistics of the fluctuations in the Stokes parameters of a vector beam. Meanwhile, we introduce the concept of overall Stokes scintillations to describe globally how stable the Stokes parameters within the beam’s effective area are. As an example, we study the Stokes scintillations of a radially polarized beam propagating through an atmospheric turbulence obeying Kolmogorov statistics. It is found that the polarization-dependent Stokes parameters are stabler than the intensity distribution for the vector beam in turbulence. The findings are interpreted with the help of depolarization effect of the vector beam in the turbulence.
2. Stokes Scintillations
We start by considering a paraxial propagation vector beam along the direction. Since its longitudinal field component can be neglected, only the two orthogonal transverse Cartesian components and need to be taken into account. The intensity and polarization properties of the beam, at a position at frequency , are characterized by the four spectral Stokes parameters, which are defined as[20]
When the vector beam propagates through a turbulent atmosphere, both the amplitude and phase of the beam’s two orthogonal transverse field components suffer the turbulence perturbations, resulting in the random fluctuations in its Stokes parameters. The Stokes fluctuations, akin to the intensity fluctuation, are defined as
The Stokes SIs measure the (normalized) variances of the Stokes fluctuations caused by atmospheric turbulence. Usually, the SIs increase with the growth of the turbulence strength. The smaller value for indicates higher stability of in turbulence. We remark that shows the conventional intensity SI, which measures the intensity variance of the beam in turbulence. It is noted that the Stokes SIs have been proposed first for the partially coherent electromagnetic light beams due to the inherent random fluctuations in their sources[21]. Contrarily, in this work, we focus on the fluctuations of a fully coherent vector beam induced by the atmospheric turbulence.
Typically, in the spatial region where the energy of the beam tends to zero, a very small perturbation of turbulence will introduce a high value for [9]. Thus, it is not convincing if we only study the scintillation indices at a single spatial position. In order to show the scintillations of the beam’s Stokes parameters more effectively, we now introduce a global quantity that takes into account the Stokes scintillation indices at all the transverse spatial positions where the intensities are meaningful, i.e.,
3. Simulations
In the following, we use the above general formulas to study the stability of the intensity and polarization of a vector beam passing through an atmospheric turbulence. In the simulation, we consider a radially polarized beam with its electric field that can be written as a superposition of the optical modes at two poles of a higher-order Poincaré sphere[22], i.e.,
3.1. Multiple-phase-screen method
The propagation of the radially polarized beam through the Kolmogorov turbulence is solved with the help of the multiple-phase-screen method[23,24], in which the turbulence is modeled as a collection of thin random phase screens with the desired turbulence statistics. The random phase screens are placed along the transmission path at equal intervals , where is the distance between two adjacent phase screens, is the length of the turbulence link, and denotes the total number of the random phase screens. As shown in Fig. 1, the incident radially polarized beam first propagates a distance in free space and arrives at the first phase screen. The electric field in the plane of the phase screen is modified by a random phase , which represents the accumulated turbulence effect over . The above step is repeated until the beam reaches the last phase screen, and finally, the light beam arrives at the detector, which records a single realization of the field (or an instantaneous field). Another realization is obtained by refreshing the phase screens and propagating the radially polarized beam through the path again. In our simulation, 600 realizations are obtained to calculate the average Stokes parameters.
Figure 1.Schematic diagram illustrating the propagation of a radially polarized beam through a turbulent atmosphere in terms of the multiple-phase-screen method.
The random phase for the th phase screen is obtained by
3.2. Simulation results
The top panels of Fig. 2 show the simulation results for the intensity and the polarization state [obtained by , , and ] of each single realization in the receive plane when the radially polarized beam passes through the turbulence link with and . The corresponding results for the average intensity and polarization state, as well as the degree of polarization [20] are presented in the bottom panels of Fig. 2. It is found that the radially polarized beam is unaffected by the weak turbulence with [Fig. 2(a)]. When the turbulence strength increases to , we find both the intensity and the polarization state of the instantaneous field become unstable [Fig. 2(d)], resulting in the degeneration of the dark-hollow distribution in the average intensity [see Fig. 2(e)]. The dark cone in the average intensity disappears because of the depolarization effect of the beam induced by the turbulence fluctuations. As shown in Figs. 2(c) and 2(f), the degree of polarization of the average beam reduces with the increasing turbulence strength. It is worth noting that the instantaneous field for a single realization still remains essentially fully polarized. In contrary to the average intensity, it is found that the polarization state of the average beam is less affected by the turbulence fluctuations, i.e., in Figs. 2(b) and 2(e), the beam still shows a fine radial polarization distribution.
Figure 2.Simulation results for the intensity and polarization state of (a), (d) the instantaneous field realizations and (b), (e) the averaged field over 600 realizations in the receive plane after the radially polarized beam passing through the atmospheric turbulence; (c) and (f) show the degree of polarization P(
Figures 3(a)–3(d) show the spatial distributions for the instantaneous Stokes parameters of one single realization, while Figs. 3(e)–3(h) display the average Stokes parameters over realizations for the case when . Compared to the three polarization-dependent Stokes parameters, we find the intensity fluctuation is larger than the polarization-dependent Stokes fluctuations. Based on Eq. (6), we obtain the spatial distributions of the corresponding Stokes SIs, which are shown in Figs. 3(i)–3(l). We find that outside the white dashed ring (where the average intensity is less than 10% of its maximum value) the SIs are much higher than those inside the ring. However, these highly valued indices outside the ring cannot correctly reflect the Stokes fluctuations of the beam, since at those positions the beam has negligible power, as shown in Fig. 3(e). Thus, we only take the Stokes SIs inside the ring into account, and we calculate the overall Stokes scintillations with the help of Eq. (7). The calculated values for the four overall Stokes scintillations are presented in Fig. 3(m). First, we find the overall intensity scintillation is higher than the polarization-dependent overall Stokes scintillations , , and , which indicate that the polarization-dependent Stokes parameters are stabler than the intensity for a radially polarized beam in the turbulence. It is also found that . This is because of the symmetric spatial distributions of and for the radially polarized beam, i.e., by rotating 45 deg counterclockwise, is obtained. The smallest value for is due to the appearance of the circular polarization in the instantaneous field realizations, as shown in Figs. 2(d) and 3(d). It should be noted that there is effectively no circular polarization in the averaged field [Fig. 2(e)], which can also be seen from Fig. 3(h) that nearly vanishes.
Figure 3.Spatial distributions for (a)–(d) the instantaneous Stokes parameters of a single realization; (e)–(h) the average Stokes parameters over 600 realizations; and (i)–(l) the Stokes scintillation indices in the receive plane after the radially polarized beam passing through the atmospheric turbulence with σR2 = 1. (m) shows the calculated values for the four overall Stokes scintillations. In (e) and (i)–(l), within the white dashed ring the average intensity is larger than 10% of its maximum value.
To examine the effect of turbulence strength on the overall Stokes scintillations, we plot in Fig. 4(a) the behavior of , , , and with different turbulence strengths. It is found that with the increase of , all the four overall Stokes scintillations increase as well. When , the values of overall Stokes scintillations are about twice as large as those in the case when . The intensity and polarization state of instantaneous field realizations and their average field are shown in Figs. 4(b) and 4(c), respectively. Compared to the instantaneous intensity and polarization state shown in Fig. 2, we find the beam indeed becomes more unstable with the increase of overall Stokes scintillations. From Fig. 4(a), we also find that the intensity overall scintillation (green dots) is always greater than the polarization-dependent overall Stokes scintillations (except for the beam in free space with ). In addition, with the increase of the turbulence strength the gaps between these overall scintillations enlarge, which indicates that the polarization-dependent Stokes parameters of a vector beam are stabler compared to the intensity distribution; this effect is more obvious when the turbulence strength increases.
Figure 4.(a) Behavior of overall Stokes scintillations with the Rytov variance σR2 for the radially polarized beam propagation through the atmospheric turbulence; simulation results for the intensity and polarization state of (b) the instantaneous field realizations and (c) the averaged field over 600 realizations in the receive plane for σR2 = 5; (d) shows the degree of polarization of the averaged field. The overall intensity scintillations ξR and ξL for the scalar modes
Meanwhile, it is found in Fig. 4(a) that, the same as the case for , holds for other turbulence strengths, indicating that the symmetric property in and is almost unaffected by the turbulence, which therefore determines that the radial polarization state of the averaged field is less affected by the turbulence [see Figs. 2(b), 2(e), and 4(c)]. The spatial distributions of and maintained in the turbulence indicate that the vector polarization state is stable. Thus, the similar conclusions can be obtained with other polarization representations, such as the recently proposed four-parameter notation[25]. Moreover, we plot in Fig. 4(a) the intensity overall scintillations and for the scalar modes and that construct the radially polarized beam. It is found that , and they are always larger than the overall intensity scintillation for the radially polarized beam, which is consistent with the conclusion that a vector beam has a smaller intensity SI than its scalar modes in the turbulence obtained before[9]. We note the slight difference between and is due to the simulation accuracy for the multiple-phase-screen method. With the increase of the turbulence realizaitons, the simulation error will be decreased as well.
3.3. Interpretation with depolarization effect
The increased gaps between overall scintillations can be explained with the help of the degree of polarization. From Figs. 2(c), 2(f), and 4(d), we find with the increase of the turbulence strength, the degree of polarization of the averaged beam in the receive plane decreases, similar to depolarization in turbid water[26]. Thus, the intensity of the beam contains both the polarized part and unpolarized part. In other words, the intensity is affected by the fluctuations of both the polarized and unpolarized parts, while the polarization-dependent Stokes parameters are affected only by the fully polarized part. As a result, the overall intensity scintillation is always larger than the polarization-dependent overall Stokes scintillations when the beam becomes partially polarized after the turbulence. To show the depolarization effect more intuitively, we show in Fig. 5 the behavior of the normalized power for the fully polarized and completely unpolarized parts of the beam with different turbulence strengths. The normalized power is defined as
Figure 5.Behavior of normalized power for the fully polarized part (ηp) and the completely unpolarized part (ηu) of the beam with the Rytov variance σR2.
4. Conclusions
In summary, we have examined the statistical properties for the Stokes parameters fluctuations of a radially polarized beam propagating in atmospheric turbulence. To this end, we extended the concept of intensity SI into four generalized Stokes SIs and introduced the overall Stokes scintillations to show globally the stability of the Stokes parameters within the effective beam’s area. The simulation results obtained with the multiple-phase-screen method showed that the overall scintillation for the intensity is always greater than those for the polarization-dependent Stokes parameters, and the gaps between these overall scintillations increase with enhancing the turbulence strength, which indicates that the polarization-dependent Stokes parameters of a vector beam are stabler than its intensity distribution in the turbulence. The results have been interpreted with the depolarization effect of the vector beam in the turbulence. We remark that the obtained conclusions in this work are valid also for the vector beams with higher-order polarization states (i.e., the polarization order ). We expect that our findings may find use in light-polarization-based free-space optical communications.
References
[1] L. C. Andrews, R. L. Phillips, C. Y. Hopen. Laser Beam Scintillation with Applications(2001).
[17] L. C. Andrews, R. L. Phillips. Laser Beam Propagation through Random Media(2005).
[18] C. Brosseau. Fundamentals of Polarized Light: A Statistical Optics Approach(1998).
[20] L. Mandel, E. Wolf. Optical Coherence and Quantum Optics(1995).
Set citation alerts for the article
Please enter your email address