[1] LUO D. Research and application of PDC and PDC bits［D］. Wuhan: Wuhan University of Technology,2010:1-5. (in Chinese)

[2] ZhANG Q J, CAO F G. Summary of machining technologies of polycrystalline diamond (PCD)［J］. Opt. Precision Eng., 2006(4):76-80. (in Chinese)

[3] LIU ZH B, WANG X B. Influence of built-up edge phases on characteristics of surface profile of micro cutting ［J］. Opt. Precision Eng., 2011,19(1):90-96. (in Chinese)

[4] GE Y F, XU J H, YANG H. Experiments of ultra-precision turning of SiCp/Al composites ［J］.Diamond & Abrasives Engineering, 2009,17(7):1621-1628. (in Chinese)

[5] WANG SH, ZHANG H T. Research on minimum grinding allowance of PCD tools［J］.Tool Engineering,2004,38(4):17-19. (in Chinese)

[6] WANG J. The way to improve super-hard cutting tool material wire-cutting processing efficiency ［J］. Electromachining & Mould,2004(4):59-60. (in Chinese)

[7] ZHANG G F, DENG ZH H. Cutting mechanism and surface appearance of PDC with WEDM［J］.China Mechanical Engineering, 2007,18(6):671-675. (in Chinese)

[8] WU Y, ZHANG G F. Damage analysis of PDC cutted by Nd:YAG laser and WEDM［J］.China Mechanical Engineering,2010,21(9):1034-1039. (in Chinese)

[9] SUZUKI K, SHIRAISHI Y, NAKAJIMA N, et al.. Development of new PCD made up of boron doped diamond particles and its machinability by EDM［J］. Advanced Materials Research, 2009,76-78:684-689.

[10] OBACIU G, PISARCIUC C. Electro discharge machining of PCD and CVD ［J］. Nonconventional Technologies Review, 2008(1):27-30.

[11] WANG Y G, TU G C, LIU G. Key processes for manufacturing PCD cutting tools ［J］.Tool Technology,2010,44(1):32-35. (in Chinese)

[12] JIA Y, KIM B S, DJHU. Parametric study on near-dry wire electrodischarge machining of polycrystalline diamond-coated tungsten carbide material［J］. Journal of Engineering Manufacture,2009,224:185-194.

[13] SHEN X L, ZHANG L X. Based on superhard tool materials research with WEDM wire cutting［J］. Journal of Hunan Industry Polytechnic, 2010,10(1):1-3. (in Chinese)