Design and Research of the Light Mixing Component for High- uniformity and Ultra-thin Direct-down LED Panel Light

PANG Pei-yuan; WEN Shang-sheng; HUANG Ya-qi; ZHANG Shuai; CHEN Xin-ya; CHEN Hao-wei; MA Bing-xu; KANG Li-juan

doi:10.3788/gzxb20174605.0523003

[1] GAO Pei-li. The study of optical design for limited shape lighting［D］. Jiangnan University, 2015.

[2] YAN Chong-guang, SHENG Yu-lin. Overview of a new generation of ultra-thin LED flat lamp［J］. Advanced Materials Industry.2015, (07): 58-60.

[3] XIAO Xiao, WEN Shang-sheng, CHEN Jian-long, et al. Optical performance of secondary lightguide-diffusive component in direct LED backlight module［J］. Journal of Optoelectronics·Laser, 2013, 24(4): 679-686.

[4] CHEN Hao-wei, WEN Shang-sheng, MA Bing-xu, et al.Design of super slim direct-down LED panel with tapered optical elements based on Taguchi method［J］.Acta Photonica Sinica,2015(10): 1022003.

[5] CHEN E-zhen,GUO Zhen-ning,ZHI Jia-jun. Lens design with uniform illumination of the LED extended sources［J］. Journal of Huaqiao University (Natural Scicnce), 2013, 34(6): 632-633.

[6] SUN Zhi-hui, CHANG Jun, ZHAO Nan, et al. A novel LED for LCD backlight［J］. Optical Technique, 2007, 33(suppl): 282-284.

[7] ZHU Zhen-min, QU Xing-hua, LIANGHai-yu, et al. Uniform illumination study by light-emitting diode ring array and diffuse reflection surface［J］.Acta Optica Sinica, 2011, 31(1): 0115001.

[8] SHI Chen-yang, WEN Shang-shen, CHEN Ying-cong. Study on curved surface LED array illumination problem based on Taguchi method［J］. Chinese Journal of Luminescence, 2015, 36(3): 348-354.

[9] SHI Chen-yang, WEN Shang-shen, CHEN Ying-cong.Study of surface LED array multi-shadow problem based on Taguchi method［J］. Chinese Journal of Luminescence, 2015(06):651-656.

[10] LAN Zhi-yong, YANG Xiang-yu, WANG Fang-yuan, et al. Application for optimal designing of sinusoidal interior permanent magnet synchronous motors by using the Taguchi method［J］. Transactions of China Electrotechnical Society, 2011, 26(12): 37-42.

[11] FANG Yi-Chin, TZENG Yih-Fong, LI Si-Xian. Multi-objective design and extended optimization for developing a miniature light emitting diode pocket-sized projection display［J］. Optical Review, 2008, 15(5): 241-250.

[12] YAN Wen-ping, GUO Zhen-ning, LIN Jie-ben,et al. Direct-down LED panel light design for uniform illumination［J］.Journal of Optoelectronics·Laser, 2014, 25(10): 1878-1885.

[13] CHEN E-zhen,GUO Zhen-ning,ZHI Jia-jun,et al.Study on dot shape for the llight guide plate of back-light［J］. Laser &Optoelectronics Progress, 2013, 50(3): 161-166.

[14] PENG Xiang-fang, LIU Ting, CHEN Jin-wei. Recent development of precision injection molding technology［J］.Plastics, 2004, 33(6): 79-83.

[15] SONG Man-cang, YAN Ke-hui. Present situations of numerical simulation technology for this wall injection molding［J］. Plastics Science and Technology, 2006, 34(1): 51-54.

[16] ZHANG Sheng-gui. Study on control mechanism and equipment of precision injection molding based on polymer PVT property［D］.Beijing University of Chemical Technology, 2013.

[17] LI Tian-liang, TAN Yue-gang, ZHANG Xiang, et al. Strain transfer factors of pasted FBG on bending part surface［J］. Optics and Precision Engineering, 2015, 23(5): 1254-1264.

CLP Journals