[1] THIAN S, TANG Y, FUH J Y H, et al.. Formation of micromoulds via UV lithography of SU8 photoresist and nickel electrodeposition ［C］. Proceedings of the Institution of Mechanical Engineers, UK: Mechanical Engineering Publications Ltd, 2006：329-333.

[2] NAPHON P, KHONSEUR O. Study on the convective heat transfer and pressure drop in the micro-channel heat sink ［J］. International Communications in Heat and Mass Transfer, 2009,3(1)6：39-44.

[3] LORENZ H, DESPONT M, VETTIGER P, et al.. Fabrication of photoplastic high-aspect ratio microparts and micromolds using SU-8 UV resist ［J］. Microsystem Technologies, 1998,4(3)：143-146.

[4] CHEN SH J, LI Y G, SHAN SH J. Microneedle array and mask compensation based on X-ray lithography ［J］. Opt. Precision Eng., 2010,18(2):420-425. (in Chinese)

[5] CHAN-PARK M B, ZHANG J, YAN Y H, et al.. Fabrication of large SU-8 mold with high aspect ratio microchannels by UV exposure dose reduction ［J］. Sensors and Actuators B, 2004,101：175-182.

[6] ZHUANG J, YU T M, WANG M J, et al.. Fabrication of microchannel cavity using UV-LIGA process ［J］. Journal of Harbin Institute of Technology, 2009,41(5)：106-109. (in Chinese)

[7] DU L Q, WANG Q J, ZHANG X L. Reduction of internal stress in SU-8 photoresist layer by ultrasonic treatment ［J］. Science China Technological Sciences, 2010, 53(11)：3006-3113.

[8] ZIZZARI A, ARIMA V, ZACHEO A, et al.. Fabrication of SU-8 microreactors for radiopharmaceutical production ［J］. Microelectronic Engineering, 2011,88(8)：1664-1667.

[9] HU Y Y, ZHU D, LI H S, et al.. Fabrication of ultra-high metal micro electrode array using UV-LIGA technology ［J］. Opt. Precision Eng., 2010，18(3)：670-675. (in Chinese)

[10] HUANG X L, XIONG Y, CHEN G Y, et al.. Fabrication of micro spiral acceleration switch using UV-LIGA technology ［J］. Opt. Precision Eng., 2010,18(5):1152-1158. (in Chinese)

[11] DU L Q, ZHU SH M. Study on internal stress of thick SU-8 layer in MEMS ［J］. Opt. Precision Eng., 2007,15(9):1377-1382. (in Chinese)

[12] CHANG H K, KIM Y K. UV-LIGA process for high aspect ratio structure using stress barrier and C-shaped etch hole ［J］. Sensors and Actuators A,2000,84(3)：342-350.

[13] DU L Q, WANG Q J, ZHANG X L. Optimization of ultrasonic stress relief process parameters based on fuzzy neural network ［J］. Journal of Micro-Nano Mechatronics,2011,6：39-46.

[14] DU L Q, WANG Y, WANG Q J, et al.. Experimental study of ultrasonic stress relief used in SU-8 photoresist ［J］. Journal of Dalian University of Technology, 2010,50(6)：907-911. (in Chinese)

[15] HAMMACHER J, FUELLE A, FLAEMIG J, et al.. Stress engineering and mechanical properties of SU-8 layers for mechanical application ［J］. Microsystem Technologies, 2008,14：1515-1523.

[16] DU L Q, WANG Q J. Experimental study on ultrasonic stress relief for cured SU-8 photoresist layer ［J］. Microelectronic Engineering, 2010,87(12)：2555-2560.

[17] DU L Q, QIN J, LIU H J, et al.. Study on Process of Microinjection Metal Mold Based on UV-LIGA Technology ［J］. Microfabrication Technology, 2006,(5)：51-54. (in Chinese)

[18] DU L Q, JIA SH F, NIE W R, et al.. Fabrication of fuze micro-electro-mechanical system safety device ［J］. Chinese Journal of Mechanical Engineering,2011,24(5)：836-841.