[2] Liang W, Eliyahu D, Ilchenko V S, Savchenkov A A, Matsko A B, Seidel D and Maleki L 2015 High spectral purity Kerr frequency comb radio frequency photonic oscillator Nat. Commun. 6 7957

[3] Salzenstein P, Tavernier H, Volyanskiy K, Kim N N T, Larger L and Rubiola E 2009 Optical mini-disk resonator integrated into a compact optoelectronic oscillator Acta Phys. Pol. A 116 661–3

[4] Liang W, Savchenkov A A, Matsko A B, Ilchenko V S, Seidel D and Maleki L 2011 Generation of near-infrared frequency combs from a MgF2 whispering gallery mode resonator Opt. Lett. 36 2290–2

[5] Min S, Dornfeld D, Ohmori H, Lee D, Deichmueller M, Yasuda T and Niwa K 2006 Variation in machinability of single crystal materials in micromachining CIRP Ann. 55 103–6

[6] HuangWH,Yu DP, ZhangM,CaoQSandYao J2018 Predictive cutting force model for ductile-regime machining of brittle materials Int. J. Adv. Manuf. Technol. 98 781–90

[7] Yu D P, Wong Y S and Hong G S 2011 A novel method for determination of the subsurface damage depth in diamond turning of brittle materials Int. J. Mach. Tools Manuf. 51 918–27

[8] Fujii S, Hayama Y, Imamura K, Kumazaki H, Kakinuma Y and Tanabe T 2020 All-precision-machining fabrication of ultrahigh-Q crystalline optical microresonators Optica 7 694–701

[9] Gao J, Luo X C, Fang F Z and Sun J N 2022 Fundamentals of atomic and close-to-atomic scale manufacturing: a review Int. J. Extrem. Manuf. 4 012001

[10] Zhang T, Jiang F, Huang H, Lu J, Wu Y Q, Jiang Z Y and Xu X P 2021 Towards understanding the brittle–ductile transition in the extreme manufacturing Int. J. Extrem. Manuf. 3 022001

[11] Hou X, Li J, Li Y and Tian Y 2022 Intermolecular and surface forces in atomic-scale manufacturing Int. J. Extrem. Manuf. 4 022002

[12] Geng Y Q, Yan Y D, He Y and Hu Z J 2017 Investigation on friction behavior and processing depth prediction of polymer in nanoscale using AFM probe-based nanoscratching method Tribol. Int. 114 33–41

[13] Li C, Zhang F H, Wang X and Rao X S 2018 Repeated nanoscratch and double nanoscratch tests of Lu2O3 transparent ceramics: material removal and deformation mechanism, and theoretical model of penetration depth J. Eur. Ceram. Soc. 38 705–18

[14] LiC,PiaoYC,MengBB,HuYX,LiLQandZhangFH 2022 Phase transition and plastic deformation mechanisms induced by self-rotating grinding of GaN single crystals Int. J. Mach. Tools Manuf. 172 103827

[15] Zhou W W, Wang J Q, Zhao J and Liu Y 2021 Experimental research on single abrasive grain scratch SiCf/SiC ceramic matrix composite Diam. Abras. Eng. 41 51–57

[16] Gao W, Zhang Y X and Huang P J 2021 Study on material removal mechanism of 6H-SiC single crystal wafer based on different nano-scratch order Diam. Abras. Eng. 41 92–97

[17] LiC,PiaoYC,MengBB,ZhangY, LiLQandZhangFH 2022 Anisotropy dependence of material removal and deformation mechanisms during nanoscratch of gallium nitride single crystals on (0001) plane Appl. Surf. Sci. 578 152028

[18] Wang J H, Guo B, Zhao Q L, Zhang C Y, Zhang Q L, Chen H X and Sun J X 2017 Dependence of material removal on crystal orientation of sapphire under cross scratching J. Eur. Ceram. Soc. 37 2465–72

[19] Wang J H, Guo B, Zhao Q L, Zhang C Y, Zhang Q L and Zhai W J 2017 Evolution of material removal modes of sapphire under varied scratching depths Ceram. Int. 43 10353–60

[20] SunY, JinLY, GongYD,Wen XL,YinGQ,Wen Qand Tang B J 2022 Experimental evaluation of surface generation and force time-varying characteristics of curvilinear grooved micro end mills fabricated by EDM J. Manuf. Process. 73 799–814

[21] Mizumoto Y and Kakinuma Y 2018 Revisit of the anisotropic deformation behavior of single-crystal CaF2 in orthogonal cutting Precis. Eng. 53 9–16

[22] Nowak R and Sakai M 1994 The anisotropy of surface deformation of sapphire: continuous indentation of triangular indenter Acta Metall. Mater. 42 2879–91

[23] ChenZB,GeMR,BiWB,ZhangCZandGePQ2021 Study on crack initiation scratching depth of monocrystalline silicon Diam. Abras. Eng. 41 55–59

[24] LiuQ,ChenMJ,LiaoZR,FengJY, XuDD andChengJ 2021 On the improvement of the ductile removal ability of brittle KDP crystal via temperature effect Ceram. Int. 47 33127–39

[25] LiXY, GaoYF, GePQ,ZhangL,BiWBandMengJF 2019 Nucleation location and propagation direction of radial and median cracks for brittle material in scratching Ceram. Int. 45 7524–36

[26] Wang W, Yao P, Wang J, Huang C Z, Kuriyagawa T, Zhu H T, Zou B and Liu H L 2017 Elastic stress field model and micro-crack evolution for isotropic brittle materials during single grit scratching Ceram. Int. 43 10726–36

[27] LiC,LiXL,Wu YQ,ZhangFHandHuangH2019 Deformation mechanism and force modelling of the grinding of YAG single crystals Int. J. Mach. Tools Manuf. 143 23–37

[28] Li C, Zhang F H, Meng B B, Rao X S and Zhou Y 2017 Research of material removal and deformation mechanism for single crystal GGG (Gd3Ga5O12) based on varied-depth nanoscratch testing Mater. Des. 125 180–8

[29] Ghosh D, Subhash G, Radhakrishnan R and Sudarshan T S 2008 Scratch-induced microplasticity and microcracking in zirconium diboride–silicon carbide composite Acta Mater. 56 3011–22

[30] Feng G, Qu S, Huang Y and Nix W D 2007 An analytical expression for the stress field around an elastoplastic indentation/contact Acta Mater. 55 2929–38

[31] Ahn Y, Farris T N and Chandrasekar S 1998 Sliding microindentation fracture of brittle materials: role of elastic stress fields Mech. Mater. 29 143–52

[32] Huang L, Bonifacio C, Song D, Van Benthem K, Mukherjee A K and Schoenung J M 2011 Investigation into the microstructure evolution caused by nanoscratch-induced room temperature deformation in M-plane sapphire Acta Mater. 59 5181–93

[33] Kandil H M, Greiner J D, Ayers A C and Smith J F 1981 Single-crystal elastic constants of MgF2 in the temperature range 4.2–300 K J. Appl. Phys. 52 759–63

[34] Zhang J M, Zhang Y, Xu K W and Ji V 2007 Anisotropic elasticity in hexagonal crystals Thin Solid Films 515 7020–4

[35] Nishidate K, Baba M, Sato T and Nishikawa K 1995 Molecular-dynamics studies on the shock-induced phase transition of a MgF2 crystal Phys. Rev. B 52 3170–6

[36] WangPZ,GePQ,BiWB,LiuTYandGaoYF2018Stress analysis in scratching of anisotropic single-crystal silicon carbide Int. J. Mech. Sci. 141 1–8

[37] Feng J Y, Wan Z P, Wang W, Huang X F, Ding X R and Tang Y 2020 Unique crack behaviors of glass BK7 occurred in successive double scratch under critical load of median crack initiation J. Eur. Ceram. Soc. 40 3279–90

[38] Zhang Y, Wang Q, Li C, Piao Y C, Hou N and Hu K N 2022 Characterization of surface and subsurface defects induced by abrasive machining of optical crystals using grazing incidence x-ray diffraction and molecular dynamics J. Adv. Res. 36 51–61

[39] Li T L, Gao Y F, Bei H and George E P 2011 Indentation Schmid factor and orientation dependence of nanoindentation pop-in behavior of NiAl single crystals J. Mech. Phys. Solids 59 1147–62

[40] Mizumoto Y, Maas P, Kakinuma Y and Min S 2017 Investigation of the cutting mechanisms and the anisotropic ductility of monocrystalline sapphire CIRP Ann. 66 89–92

[41] Hayama Y, Fujii S, Tanabe T and Kakinuma Y 2022 Theoretical approach on the critical depth of cut of single crystal MgF2 and application to a microcavity Precis. Eng. 73 234–43

[42] Li C, Zhang F H and Piao Y C 2019 Strain-rate dependence of modelling of crack-free grinding of GGG single crystals surface/subsurface deformation mechanisms during J. Mater. Process. Technol. 279 116577 nanoscratching tests of GGG single crystal Ceram. Int.

[43] Li C, Hu Y, Zhang F, Geng Y and Meng B 2023 Molecular 45 15015–24 dynamics simulation of laser assisted grinding of GaN

[44] Li C, Wu Y Q, Li X L, Ma L J, Zhang F H and Huang H 2020 crystals Int. J. Mech. Sci. (https://doi.org/10.1016/ Deformation characteristics and surface generation j.ijmecsci.2022.107856)