[1] Zhang Anfeng, Li Dichen, Lu Bingheng. Development of research on laser direct metal rapid prototyping technology ［J］.Ordnance Material Science and Engineering, 2007, 30(5): 68～72

[2] Zhong Minlin, Liu Wenjin. Leading areas and hot topics on global laser materials processing research［J］.Chinese J. Lasers, 2008, 35(11): 1653～1659

[3] Yang Sen, Zhong Minlin, Zhang Qingmao et al.. Directly rapid fabrication of metal components by laser cladding ［J］. Powder Metallurgy Technology, 2002, 20(4): 234～238

[4] Zhang Kuiwu. Industrial applications of laser clad and laser deposited metal parts and graded materials ［J］. Heat Treatment of Metals, 2002, 27(9): 1～4

[5] Yang Xichen, Li Huishan, Liu Yunwu et al.. Laser remanufacturing technology and its industrial application［J］. Chinese Surface Engineering, 2003, 16(4): 43～46

[6] Zhang Dongyun, Wang Ruize, Zhao Jianzhe et al.. Lastest advance of laser direct manufacturing of metallic parts ［J］. Chinese J. Lasers, 2010, 37(1): 18～25

[7] Lin Jehnming. Numerical simulation of the focused powder streams in coaxial laser cladding ［J］.J. Material Processing Technology, 2000, 105(1-2): 17～23

[8] Yang Xichen, Lei Jianbo, Liu Yunwu et al.. Experimental measurement of metal powder stream concentration field in laser manufacturing ［J］. Chinese J.Lasers, 2006, 33(7): 993～997

[9] Li Li,Yang Xichen, Dong Zhe. CCD measurement of temperature field of coaxial powder flow in laser cladding ［J］. Chinese J. Lasers, 2009, 36(9): 2431～2437

[10] Yang Xichen. Momentum and mass transferences of coaxial powder stream in laser manufacturing ［J］. Chinese J. Lasers, 2008, 35(11): 1664～1679

[11] Zhang Anfeng, Zhou Zhimin, Li Dichen et al.. Numerical simulation of gas-solid two-phase flow field on coaxial powder nozzle in laser metal direct manufacturing ［J］. J. Xi′an Jiaotong University, 2008, 42(9): 1169～1173

[12] Jichang Liu, Lijun Li. Study on cross-section clad profile in coaxial single-pass cladding with a low-power laser［J］. Optics & Laser Technology, 2005, 37(6): 478～482

[13] Li Peng, Ji Shengqin, Zeng Xiaoyan et al.. Direct laser fabrication of thin-walled metal parts under open-loop control ［J］. Machine Tools & Manufacture, 2007, 47(6): 996～1002

[14] Huang Weidong, Lin Xin, Chen Jing et al.. Laser Solid Forming ［M］. Xi′an: Northwestern Polytechnical University Press, 2007. 51～53