Xu-Lin Zhang, Wei Yang, Tong-Zheng Luo, Yan-Yan Huang, Lei Lei, Gui-Jun Li, Ping Xu. Two-dimensional distribution expressions of micro-prism on bottom surface of partial integrated light guide plate [J]. Acta Physica Sinica, 2019, 68(21): 218501-1
- Acta Physica Sinica
- Vol. 68, Issue 21, 218501-1 (2019)
Fig. 1. Diagram of partial integrated backlight module.集成化背光模组结构示意图
Fig. 2. Two-dimensional distribution of micro-prism on the bottom surface of PILGP.PILGP下表面微棱镜二维分布示意图
Fig. 3. Fitting curve of optimized B y and W .
优化系数B y 与导光板宽度W 的拟合曲线
Fig. 4. Fitting curve of optimized B x and L .
优化系数B x 与导光板长度L 的拟合曲线
Fig. 5. Fitting curve of optimized C x and L .
优化系数C x 与导光板长度L 的拟合曲线
|
Table 1.
Structural parameters of 5-inch partial integrated backlight module.
5英寸集成化背光模组结构参数
| |||||||||||||||||||||||||||||||||||||
Table 2.
Simulation results of luminance uniformity with optimized and calculated By at different widths W of PILGPs.
不同导光板宽度W下优化、计算系数By以及对应的背光模组亮度均匀性仿真值
|
Table 3.
Simulation results of luminace uniformity with calculated Bx and Cx at different lengths L of PILGPs.
不同导光板长度L下的计算系数Bx和Cx对应的亮度均匀性仿真值
|
Table 4.
Luminance uniformity of partial integrated backlight module with two-dimensional distribution of micro-prism on the bottom surface of PILGPs at different sizes.
PILGP下表面微棱镜二维分布的不同尺寸背光模组亮度均匀性
| ||||||||||||||||||||
Table 5.
Simulation results of performance parameters in 5-inch partial integrated backlight modules with two-dimensional distribution of micro-prism optimized by BPO or distribution expressions.
分别具有BPO及分布公式组优化的微棱镜二维分布的5英寸背光模组性能参数仿真结果
Set citation alerts for the article
Please enter your email address
© Copyright 2018-2021 | Chinese Laser Press. All Rights Reserved 沪ICP备15018463号-20