Physical Properties of Silicon Nitride Ceramics by Pressureless Sintering

WU Zhenfei; WANG Yuechao; LU Lifang; ZHANG Hongyi

[1] HAMPSHIRE S. Silicon nitride ceramics: review of structure, processing and properties［J］. Journal of Achievements in Materials and Manufacturing Engineering, 2007, 24(1): 43-50.

[2] DUAN R G, ROEBBEN G, VLEUGELS J, et al. Effect of TiX(X=C, N, O) additives on microstructure and properties of silicon nitride based ceramics［J］. Scripta Materialia, 2005, 53(6): 669-673.

[3] ZIEGLER G, HEINRICH J, WTTING G. Relationships between processing, microstructure and properties of dense and reaction-bonded silicon nitride［J］. Journal of Materials Science, 1987, 22(9): 3041-3086.

[5] PYZIK A J, BEAMAN D R. Microstructure and properties of self-reinforced silicon nitride［J］. Journal of the American Ceramic Society, 1993, 76(11): 2737-2744.

[6] MENG Q Y, ZHAO Z H, SUN Y Q, et al. Low temperature pressureless sintering of dense silicon nitride using BaO-Al2O3-SiO2 glass as sintering aid［J］. Ceramics International, 2017, 43(13): 10123-10129.

[7] DUAN Y S, ZHANG J X, LI X G, et al. Low temperature pressureless sintering of silicon nitride ceramics for circuit substrates in powder electronic devices［J］. Ceramics International, 2018, 44(4): 4375-4380.

[8] LEE S H. Densification, mass loss, and mechanical properties of low-temperature pressureless-sintered Si3N4 with LiYO2 additive: the effects of additive content and annealing［J］. International Journal of Applied Ceramic Technology, 2010, 7(6): 881-888.

[13] HOTTA M, SHINOURA T, ENOMOTO N, et al. Spark plasma sintering of nanosized amorphous silicon nitride powder with a small amount of sintering additive［J］. Journal of the American Ceramic Society, 2010, 93(6): 1544-1546.

[14] TATARKO P, LOJANOV , DUSZA J, et al. Influence of various rare-earth oxide additives on microstructure and mechanical properties of silicon nitride based nanocomposites［J］. Materials Science and Engineering: A, 2010, 527(18/19): 4771-4778.

[18] CARLE V, SCHAEFER U, TAEFFNER U, et al. Ceramography of high performance ceramics: description of materials, preparation, etching techniques, and description of microstructure［J］. Praktische Metallographie, 1991, 28(11): 592-610.