Design and fabrication of waveguide-based chip-to-chip optical interconnection network on printed circuit boards

Zhihua YU; Fengguang LUO; Xu DI; Qing TAO; Weilin ZHOU; Bin LI; Liangjia ZONG; Guangjun WANG

doi:10.1007/s12200-010-0006-z

Journals >Frontiers of Optoelectronics >Volume 3 >Issue 2 >Page 211 > Article

Frontiers of Optoelectronics
Vol. 3, Issue 2, 211 (2010)

Design and fabrication of waveguide-based chip-to-chip optical interconnection network on printed circuit boards

Zhihua YU^1,2, Fengguang LUO^1,*, Xu DI¹, Qing TAO¹..., Weilin ZHOU¹, Bin LI¹, Liangjia ZONG¹ and Guangjun WANG²|Show fewer author(s)

Author Affiliations

¹Wuhan National Laboratory for Optoelectronics, College of Optoelectronic Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China

²Experimental Teaching Center of Information Technology, China University of Geosciences, Wuhan 430074, China

show less

DOI: 10.1007/s12200-010-0006-z Cite this Article

Zhihua YU, Fengguang LUO, Xu DI, Qing TAO, Weilin ZHOU, Bin LI, Liangjia ZONG, Guangjun WANG. Design and fabrication of waveguide-based chip-to-chip optical interconnection network on printed circuit boards[J]. Frontiers of Optoelectronics, 2010, 3(2): 211 Copy Citation Text

show less

Abstract

A waveguide-based chip-to-chip optical interconnection network on printed circuit board (PCB) was designed and fabricated, and experiments confirmed that the data rate in each channel could reach above 3.125 Gbit/s and the bit error rate (BER) could be up to 1.2710-18, which would be a good solution to solve the communication bottlenecks between high-speed very large scale integration chips. Besides, the whole design and fabrication of optical interconnection network on printed circuit board has the advantages of high reliable, low cost and ease of manufacture.

Keywords

bit error rate (BER)optical interconnect optical waveguide (WG)printed circuit board (PCB)

Download Citation

Save the article for my favorites

Paper Information

微信扫一扫：分享

微信扫一扫：分享