• Acta Photonica Sinica
  • Vol. 51, Issue 3, 0306002 (2022)
Wenlin ZHANG, Kun LIU*, Junfeng JIANG, Tianhua XU, Shuang WANG, Zhao ZHANG, Jianying JING, Jinying MA, and Tiegen LIU
Author Affiliations
  • Key Laboratory of Optoelectronics Information Technology,Ministry of Education,School of Precision Instruments and Optoelectronics Engineering,Tianjin University,Tianjin 300072,China
  • show less
    DOI: 10.3788/gzxb20225103.0306002 Cite this Article
    Wenlin ZHANG, Kun LIU, Junfeng JIANG, Tianhua XU, Shuang WANG, Zhao ZHANG, Jianying JING, Jinying MA, Tiegen LIU. Tungsten Disulfide Modified Tapered Fiber Optic Surface Plasmon Resonance Sensor with Enhanced Sensitivity[J]. Acta Photonica Sinica, 2022, 51(3): 0306002 Copy Citation Text show less
    The schematic configuration of tapered fiber SPR sensor
    Fig. 1. The schematic configuration of tapered fiber SPR sensor
    Simulation results of the dielectric constants of WS2
    Fig. 2. Simulation results of the dielectric constants of WS2
    The influence of the tapering ratio on the multimode fiber SPR sensor sensitivity
    Fig. 3. The influence of the tapering ratio on the multimode fiber SPR sensor sensitivity
    The influence of the WS2 on the tapered fiber WS2-Au SPR sensor sensitivity
    Fig. 4. The influence of the WS2 on the tapered fiber WS2-Au SPR sensor sensitivity
    The manufacturing process of tapered fiber WS2-Au SPR sensor
    Fig. 5. The manufacturing process of tapered fiber WS2-Au SPR sensor
    The micrographs of the sensor
    Fig. 6. The micrographs of the sensor
    Experimental measurement system and tapered fiber WS2-Au SPR sensor
    Fig. 7. Experimental measurement system and tapered fiber WS2-Au SPR sensor
    The transmission spectrum of sensors
    Fig. 8. The transmission spectrum of sensors
    The RI linear fitting curve of fiber optic SPR sensor without and with taper
    Fig. 9. The RI linear fitting curve of fiber optic SPR sensor without and with taper
    The characteristic of the tapered fiber Au-WS2 SPR sensor
    Fig. 10. The characteristic of the tapered fiber Au-WS2 SPR sensor
    The characteristic of the tapered fiber WS2-Au SPR sensor
    Fig. 11. The characteristic of the tapered fiber WS2-Au SPR sensor
    The characteristic of fiber optic SPR sensors with four different structures
    Fig. 12. The characteristic of fiber optic SPR sensors with four different structures
    Sensor structureRI rangeSensitivityMethodReferences
    Au-polydopamine-MoSe2@AuNPS1.333~1.3585 117.59 nm/RIUExperiment9
    Ag-black phosphorene-graphene1.330~1.3904 050 nm/RIUSimulation22
    Au-WS2 (prism)1.333~1.3602 459.3 nm/RIUExperiment15
    Au-MoSe2 (multimode fiber)1.333~1.3582 793.36 nm/RIUExperiment18
    Au-WS2 (tapered fiber)1.333~1.3802 769.979 nm/RIUExperimentProposed scheme
    WS2-Au (tapered fiber)1.333~1.3804 158.171 nm/RIUExperimentProposed scheme
    Table 1. Comparison of sensors with different structures
    Wenlin ZHANG, Kun LIU, Junfeng JIANG, Tianhua XU, Shuang WANG, Zhao ZHANG, Jianying JING, Jinying MA, Tiegen LIU. Tungsten Disulfide Modified Tapered Fiber Optic Surface Plasmon Resonance Sensor with Enhanced Sensitivity[J]. Acta Photonica Sinica, 2022, 51(3): 0306002
    Download Citation