Research Progress on High Temperature Oxidation Resistance of SiC Fibers

XIANG Yu; YU Jinshan; WANG Honglei; ZHOU Xingui

[2] GRECK O, VIRICELLE J P, BAHLOUL-HOURLIER D, et al. SiC-based ceramic fibres: thermal stability and oxidation behaviour［J］. Key Engineering Materials, 1997, 132/133/134/135/136: 1950-1953.

[3] LAMON J, R’MILI M. Damage and failure of SiC fiber tows during environment activated slow crack growth: residual behavior and strength-probability-time diagrams［J］. Acta Materialia, 2017, 131: 197-205.

[4] YIN X W, CHENG L F, ZHANG L T, et al. Fibre-reinforced multifunctional SiC matrix composite materials［J］. International Materials Reviews, 2017, 62(3): 117-172.

[5] ZHAO S, YANG Z C, ZHOU X G. Fracture behavior of SiC/SiC composites with different interfaces［J］. Journal of Inorganic Materials, 2016, 31(1): 58.

[6] SANTORO U, NOVITSKAYA E, KARANDIKAR K, et al. Phase stability of SiC/SiC fiber reinforced composites: the effect of processing on the formation of α and β phases［J］. Materials Letters, 2019, 241: 123-127.

[7] DONG S M, KATOH Y, KOHYAMA A. Processing optimization and mechanical evaluation of hot pressed 2D Tyranno-SA/SiC composites［J］. Journal of the European Ceramic Society, 2003, 23(8): 1223-1231.

[8] SHI X G, LI M Y, MA W G, et al. Experimental study on thermal transport property of KD-II SiC fiber［J］. Journal of Inorganic Materials, 2018, 33(7): 756.

[9] YAJIMA S, HAYASHI J, OMORI M, et al. Development of a silicon carbide fibre with high tensile strength［J］. Nature, 1976, 261(5562): 683-685.

[10] ISHIKAWA T, KOHTOKU Y, KUMAGAWA K, et al. High-strength alkali-resistant sintered SiC fibre stable to 2 200 ℃［J］. Nature, 1998, 391(6669): 773-775.

[11] VAHLAS C, MONTHIOUX M. On the thermal degradation of lox-M tyranno fibres［J］. Journal of the European Ceramic Society, 1995, 15(5): 445-453.

[12] BUNSELL A R, PIANT A. A review of the development of three generations of small diameter silicon carbide fibres［J］. Journal of Materials Science, 2006, 41(3): 823-839.

[13] GOU Y Z, WANG H, JIAN K, et al. Preparation and characterization of SiC fibers with diverse electrical resistivity through pyrolysis under reactive atmospheres［J］. Journal of the European Ceramic Society, 2017, 37(2): 517-522.

[15] RAMBERG C E, CRUCIANI G, SPEAR K E, et al. Passive-oxidation kinetics of high-purity silicon carbide from 800 ℃ to 1 100 ℃［J］. Journal of the American Ceramic Society, 1996, 79(11): 2897-2911.

[16] OGBUJI L U J T, OPILA E J. A comparison of the oxidation kinetics of SiC and Si3N4［J］. Journal of the Electrochemical Society, 1995, 142(3): 925-930.

[17] NNEBY C, PANTANO C G. Silicon oxycarbide formation on SiC surfaces and at the SiC/SiO2 interface［J］. Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, 1997, 15(3): 1597-1602.

[18] DAS M K, LIPKIN L A. Method of fabricating an oxide layer on a silicon carbide layer utilizing an anneal in a hydrogen environment: US7067176［P］. 2006-06-27.

[19] RAYNAUD C. Silica films on silicon carbide: a review of electrical properties and device applications［J］. Journal of Non-Crystalline Solids, 2001, 280(1/2/3): 1-31.

[20] YANG B, YU J S, GU Q C, et al. Research progress on preparation of SiCf/SiC composite［J］. Materials Reports, 2021, 35(3): 3050-3056.

[21] DEAL B E, GROVE A S. General relationship for the thermal oxidation of silicon［J］. Journal of Applied Physics, 1965, 36(12): 3770-3778.

[22] TAKEDA M, URANO A, SAKAMOTO J I, et al. Microstructure and oxidation behavior of silicon carbide fibers derived from polycarbosilane［J］. Journal of the American Ceramic Society, 2000, 83(5): 1171-1176.

[25] WILSON M, OPILA E. A review of SiC fiber oxidation with a new study of Hi-Nicalon SiC fiber oxidation［J］. Advanced Engineering Materials, 2016, 18(10): 1698-1709.

[26] YANG C X, WU J J, DITTA A, et al. Effects of temperature and atmosphere on microstructural evolution and mechanical properties of KD-II SiC fibers［J］. Ceramics International, 2020, 46(15): 24424-24434.

[27] HAY R S, FAIR G E, BOUFFIOUX R, et al. Hi-NicalonTM-S SiC fiber oxidation and scale crystallization kinetics［J］. Journal of the American Ceramic Society, 2011, 94(11): 3983-3991.

[28] HAY R S, FAIR G E, HART A, et al. Kinetics of passive oxidation of Hi-Nicalon-S SiC fibers in wet air: relationships between SiO2 scale thickness, crystallization, and fiber strength (preprint)［R］. Defense Technical Information Center, 2012.

[31] HAY R S, CHATER R J. Oxidation kinetics strength of Hi-NicalonTM-S SiC fiber after oxidation in dry and wet air［J］. Journal of the American Ceramic Society, 2017, 100(9): 4110-4130.

[32] SHIMOO T, TOYODA F, OKAMURA K. Thermal stability of low-oxygen silicon carbide fiber (Hi-Nicalon) subjected to selected oxidation treatment［J］. Journal of the American Ceramic Society, 2000, 83(6): 1450-1456.

[33] HAY R S, MOGILEVSKY P. Model for SiC fiber strength after oxidation in dry and wet air［J］. Journal of the American Ceramic Society, 2019, 102(1): 397-415.

[35] SHIMOO T, MORISADA Y, OKAMURA K. Oxidation behavior of Si-C-O fibers (nicalon) under oxygen partial pressures from 102 to 105 Pa at 1 773 K［J］. Journal of the American Ceramic Society, 2000, 83(12): 3049-3056.

[36] TAKEDA M, URANO A, SAKAMOTO J I, et al. Microstructure and oxidative degradation behavior of silicon carbide fiber Hi-Nicalon type S［J］. Journal of Nuclear Materials, 1998, 258/259/260/261/262/263: 1594-1599.

[37] MOGILEVSKY P, BOAKYE E E, HAY R S, et al. Monazite coatings on SiC fibers II: oxidation protection［J］. Journal of the American Ceramic Society, 2006, 89(11): 3481-3490.

[38] VARADARAJAN S, PATTANAIK A K, SARIN V K. Mullite interfacial coatings for SiC fibers［J］. Surface and Coatings Technology, 2001, 139(2/3): 153-160.

[39] BOAKYE E E, MOGILEVSKY P, PARTHASARATHY T A, et al. Monazite coatings on SiC fibers I: fiber strength and thermal stability［J］. Journal of the American Ceramic Society, 2006, 89(11): 3475-3480.

[40] BAKLANOVA N I, TITOV A T, BORONIN A I, et al. The yttria-stabilized zirconia and interfacial coating on nicalonTM fiber［J］. Journal of the European Ceramic Society, 2006, 26(9): 1725-1736.

[41] LI Y, CHEN M L, ZHANG Q Z, et al. Microstructure and corrosion behavior of in situ grown Y3Si2C2 coated SiC fibers exposed to air and wet-oxygen at 1 400 ℃［J］. Journal of the European Ceramic Society, 2022, 42(8): 3427-3436.