[1] A. K. Burnham, L. Hackel, P. Wegner et al.. Improving 351-nm damage performance of large-aperture fused silica and DKDP optics［C］. SPIE, 2002, 4679: 173～185

[2] P. Geraghty, W. Carr, V. Draggoo et al.. Surface damage growth mitigation on KDP/DKDP optics using single-crystal diamond micro-machining ball end mill contouring［C］. SPIE, 2006, 6403: 64030Q

[3] L. Hrubech, J. Adams, M. Feit et al.. Surface damage growth mitigation on KDP/DKDP optics using single-crystal diamond micro-machining［C］. SPIE, 2004, 5273: 273～281

[4] S. T. Yang, M. J. Matthews, S. Elhadj et al.. Comparing the use of mid-infrared versus far-infrared lasers for mitigating damage growth on fused silica［J］. Appl. Opt., 2010, 49(14): 2606～2616

[5] Huang Jin, Zhao Songnan, Wang Haijun et al.. Local CO2 laser treatment for repair surface defect in fused silica［J］. Chinese J. Lasers, 2009, 36(5): 1282～1286

[6] D. N. Nguyen, L. A. Emmert, P. Schwoebel et al.. Femtosecond pulse damage thresholds of dielectric coatings in vacuum［J］. Opt. Express, 2011, 19(6): 5690～5697

[7] J. Bonse, S. Baudach, W. Kautek et al.. Femtosecond laser damage of a high reflecting mirror［J］. Thin Solid Films, 2002, 408(1-2): 297～301

[8] M. Mielke, D. Gaudiosi, K. Kim et al.. Ultrafast fiber laser platform for advanced materials processing［J］. J. Laser. Micro/Nanoeng, 2010, 5(1): 53～58

[9] M. Perry, B. Stuart, P. Banks et al.. Ultrashort-pulse laser machining of dielectric materials［J］. J. Appl. Phys., 1999, 85(9): 6803～6810

[10] B. N. Chichkov, C. Momma, S. Nolte et al.. Femtosecond, picosecond and nanosecond laser ablation of solids［J］. Appl. Phys. A: Materials Science & Processing, 1996, 63(2): 109～115

[11] S. Nolte, C. Momma, H. Jacobs et al.. Ablation of metals by ultrashort laser pulses［J］. J. Opt. Soc. Am. B, 1997, 14(10): 2716～2722

[12] Zhang Panzheng, Fan Wei, Wang Xiaochao et al.. All-fiber ultrashort Yb3+ doped fiber laser self-started by spectral filter［J］. Acta Physics Sinica, 2011, 60(2): 279～286

[13] Wang Jiangfeng, Zhu Haidong, Li Xuechun et al.. Highly stable laser diode-pumped Nd:YLF regenerative amplifier［J］. Chinese J. Lasers, 2008, 35(2): 187～190

[14] J. E. Wolfe, S. R. Qiu, C. J. Stolz. Multilayer coating laser damage stabilization by femtosecond laser machining［C］. Optical Interference Coatings, OSA, 2010. FA2

[15] J. E. Wolfe, S. R. Qiu, C. J. Stolz. Fabrication of mitigation pits for improving laser damage resistance in dielectric mirrors by femtosecond laser machining［J］. Appl. Opt., 2011, 50(9): C457～C462